On Tuesday 24 April 2007 13:39, Alexey Dobriyan wrote:
> Please, rebuild kernel with CONFIG_CPU_FREQ_DEBUG=y option
> (right after "CPU Frequency scaling"), boot kernel with cpufreq.debug=7
> option and post full "dmesg" output when oops occurs.
Here it is. I took a couple of tries to get the bug. It seems to be most
probable during boot while using the battery of the laptop.
The laptop is a 32bit black macbook.
Linux version 2.6.18+openvz (Version: custom01) ([EMAIL PROTECTED]) (gcc
version
4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #3 SMP Tue Apr 24 15:24:32
WEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007e0d0000 (usable)
BIOS-e820: 000000007e0d0000 - 000000007e2d1000 (ACPI NVS)
BIOS-e820: 000000007e2d1000 - 000000007eebf000 (ACPI data)
BIOS-e820: 000000007eebf000 - 000000007eeef000 (ACPI NVS)
BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data)
BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
1120MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 516304
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 286928 pages, LIFO batch:31
DMI 2.4 present.
ACPI: RSDP (v002 APPLE ) @ 0x000fe020
ACPI: XSDT (v001 APPLE Apple00 0x00000061 0x01000013) @ 0x7eefd120
ACPI: FADT (v003 APPLE Apple00 0x00000061 Loki 0x0000005f) @ 0x7eefb000
ACPI: HPET (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eefa000
ACPI: MADT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef9000
ACPI: MCFG (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef8000
ACPI: ASF! (v032 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef7000
ACPI: SBST (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef6000
ACPI: ECDT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x7eef5000
ACPI: SSDT (v001 APPLE SataPri 0x00001000 INTL 0x20050309) @ 0x7eebc000
ACPI: SSDT (v001 APPLE SataSec 0x00001000 INTL 0x20050309) @ 0x7eebb000
ACPI: SSDT (v001 APPLE CpuPm 0x00003000 INTL 0x20050309) @ 0x7eeef000
ACPI: DSDT (v001 APPLE MacBook 0x00010001 INTL 0x20050309) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Detected 2129.943 MHz processor.
Built 1 zonelists. Total pages: 516304
Kernel command line: BOOT_IMAGE=LinuxCPUDB=7 ro root=803 lpj=8000000
cpufreq.debug=7
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2037852k/2065216k available (1540k kernel code, 26160k reserved, 611k
data, 204k init, 1147712k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay loop (skipped)... 4000.00 BogoMIPS preset
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000
0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9
00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
Page beancounter hash is 131072 entries.
CPU0: Intel Genuine Intel(R) CPU 1500 @ 2.00GHz stepping 08
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay loop (skipped)... 4000.00 BogoMIPS preset
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000
0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9
00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU 1500 @ 2.00GHz stepping 08
Total of 2 processors activated (8000.00 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=64
checking if image is initramfs... it is
Freeing initrd memory: 4375k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: 1000-1fff
MEM window: 90200000-902fffff
PREFETCH window: 90500000-905fffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 90100000-901fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: 90000000-900fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1177466198.896:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Testing NMI watchdog ... OK.
Starting balanced_irq
Using IPI Shortcut mode
Freeing unused kernel memory: 204k freed
Time: tsc clocksource has been installed.
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu0Ist]
[20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu0Cst]
[20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu1Ist]
[20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [APPLE ] OemTableId [ Cpu1Cst]
[20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Time: hpet clocksource has been installed.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 209, io base 0x000020a0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 209, io mem 0x90445400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x20c0-0x20c7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x20c8-0x20cf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: MATSHITADVD-R UJ-857, ATAPI CD/DVD-ROM drive
usb 2-4: new high speed USB device using ehci_hcd and address 4
usb 2-4: configuration #1 chosen from 1 choice
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
usb 1-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 225
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[225] MMIO=[90000000-900007ff]
Max Packet=[2048] IR/IT contexts=[8/8]
SCSI subsystem initialized
libata version 2.00 loaded.
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 225, io base 0x00002080
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
usb 1-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 217, io base 0x00002060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 177, io base 0x00002040
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
ata_piix 0000:00:1f.2: invalid MAP value 0
usb 1-2: new full speed USB device using uhci_hcd and address 3
PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x20D8 ctl 0x20FE bmdma 0x2020 irq 225
ata2: SATA max UDMA/133 cmd 0x20D0 ctl 0x20FA bmdma 0x2028 irq 225
scsi0 : ata_piix
usb 1-2: configuration #1 chosen from 1 choice
ATA: abnormal status 0x7F on port 0x20DF
ATA: abnormal status 0x7F on port 0x20DF
ata1.01: ATA-6, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32)
ata1.01: ata1: dev 1 multi count 16
ata1.01: configured for UDMA/100
scsi1 : ata_piix
ATA: abnormal status 0x7F on port 0x20D7
Vendor: ATA Model: TOSHIBA MK8032GS Rev: AS11
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda:<6>usb 4-2: new full speed USB device using uhci_hcd and address 2
sda1 sda2 sda3
sd 0:0:1:0: Attached scsi disk sda
usb 4-2: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0017f2fffe59f52a]
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.0-1
input: Apple Computer Apple Internal Keyboard / Trackpad
as /class/input/input1
input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad
as /class/input/input2
input: USB HID v1.11 Mouse [Apple Computer Apple Internal Keyboard / Trackpad]
on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad
as /class/input/input3
input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
hiddev96: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on
usb-0000:00:1d.2-2
input: HID 05ac:1000 as /class/input/input4
input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
input: HID 05ac:1000 as /class/input/input5
input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Probing IDE interface ide1...
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: sda3: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 3719207
ext3_orphan_cleanup: deleting unreferenced inode 3719202
ext3_orphan_cleanup: deleting unreferenced inode 3719200
ext3_orphan_cleanup: deleting unreferenced inode 3719189
ext3_orphan_cleanup: deleting unreferenced inode 3719188
EXT3-fs: sda3: 5 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.101 (c) Dave Jones
Linux video capture interface: v2.00
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:01:00.0 to 64
sky2 v1.5 addr 0x90200000 irq 177 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:17:f2:2a:1d:eb
input: PC Speaker as /class/input/input6
Real Time Clock Driver v1.12ac
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 16124K stolen memory.
agpgart: AGP aperture is 256M @ 0x80000000
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
intel_rng: FWH not detected
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
uvcvideo: Found UVC 0.00 device <unnamed> (05ac:8300)
uvcvideo: No valid video chain found.
uvcvideo: Possible an Apple iSight without firmware loaded; please read the
documentation, load the firmware and re-load the driver.<6>usbcore:
registered new driver uvcvideo
USB Video Class driver (v0.1.0-c)
wlan: 0.8.4.2 (0.9.3)
ath_pci: 0.9.4.5 (0.9.3)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:02:00.0 to 64
ath_rate_sample: 1.2 (0.9.3)
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 10.3 phy 6.1 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5424/2424: mem=0x90100000, irq=169
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_intel: azx_get_response timeout, switching to single_cmd mode...
EXT3 FS on sda3, internal journal
loop: loaded (max 8 devices)
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
fuse init (API version 7.7)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
[EMAIL PROTECTED]
hfs: write access to a jounaled filesystem is not supported, use the force
option at your own risk, mounting read-only.
Adding 3145720k swap on /swapfile. Priority:-1 extents:1143 across:56673548k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
dummy0: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
ClusterIP Version 0.8 loaded successfully
Bridge firewalling registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP1] (off-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
cpufreq-core: trying to register driver centrino
cpufreq-core: adding CPU 0
speedstep-centrino: adding state 0 with frequency 2000000 and control value
0c2c
speedstep-centrino: adding state 1 with frequency 1833000 and control value
0b28
speedstep-centrino: adding state 2 with frequency 1667000 and control value
0a24
speedstep-centrino: adding state 3 with frequency 1500000 and control value
0920
speedstep-centrino: adding state 4 with frequency 1333000 and control value
081c
speedstep-centrino: adding state 5 with frequency 1000000 and control value
0613
speedstep-centrino: centrino_cpu_init: cur=0kHz
freq-table: table entry 0: 2000000 kHz, 3116 index
freq-table: table entry 1: 1833000 kHz, 2856 index
freq-table: table entry 2: 1667000 kHz, 2596 index
freq-table: table entry 3: 1500000 kHz, 2336 index
freq-table: table entry 4: 1333000 kHz, 2076 index
freq-table: table entry 5: 1000000 kHz, 1555 index
freq-table: setting show_table for cpu 0 to f6a0be40
cpufreq-core: setting new policy for CPU 0: 1000000 - 2000000 kHz
freq-table: request for verification of policy (1000000 - 2000000 kHz) for cpu
0
freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0
freq-table: request for verification of policy (1000000 - 2000000 kHz) for cpu
0
freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0
cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 0, event 1
performance: setting to 2000000 kHz because of event 1
cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
freq-table: target is 0 (2000000 kHz, 3116)
speedstep-centrino: couldn't limit to CPUs in this domain
cpufreq-core: governor: change or update limits
cpufreq-core: __cpufreq_governor for CPU 0, event 3
performance: setting to 2000000 kHz because of event 3
cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
freq-table: target is 0 (2000000 kHz, 3116)
speedstep-centrino: couldn't limit to CPUs in this domain
cpufreq-core: initialization complete
cpufreq-core: adding CPU 1
speedstep-centrino: adding state 0 with frequency 2000000 and control value
0c2c
speedstep-centrino: adding state 1 with frequency 1833000 and control value
0b28
speedstep-centrino: adding state 2 with frequency 1667000 and control value
0a24
speedstep-centrino: adding state 3 with frequency 1500000 and control value
0920
speedstep-centrino: adding state 4 with frequency 1333000 and control value
081c
speedstep-centrino: adding state 5 with frequency 1000000 and control value
0613
speedstep-centrino: centrino_cpu_init: cur=0kHz
freq-table: table entry 0: 2000000 kHz, 3116 index
freq-table: table entry 1: 1833000 kHz, 2856 index
freq-table: table entry 2: 1667000 kHz, 2596 index
freq-table: table entry 3: 1500000 kHz, 2336 index
freq-table: table entry 4: 1333000 kHz, 2076 index
freq-table: table entry 5: 1000000 kHz, 1555 index
freq-table: setting show_table for cpu 1 to f6536840
cpufreq-core: setting new policy for CPU 1: 1000000 - 2000000 kHz
freq-table: request for verification of policy (1000000 - 2000000 kHz) for cpu
1
freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 1
freq-table: request for verification of policy (1000000 - 2000000 kHz) for cpu
1
freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 1
cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 1, event 1
performance: setting to 2000000 kHz because of event 1
cpufreq-core: target for CPU 1: 2000000 kHz, relation 1
freq-table: request for target 2000000 kHz (relation: 1) for cpu 1
freq-table: target is 0 (2000000 kHz, 3116)
speedstep-centrino: couldn't limit to CPUs in this domain
cpufreq-core: governor: change or update limits
cpufreq-core: __cpufreq_governor for CPU 1, event 3
performance: setting to 2000000 kHz because of event 3
cpufreq-core: target for CPU 1: 2000000 kHz, relation 1
freq-table: request for target 2000000 kHz (relation: 1) for cpu 1
freq-table: target is 0 (2000000 kHz, 3116)
speedstep-centrino: couldn't limit to CPUs in this domain
cpufreq-core: initialization complete
cpufreq-core: driver centrino up and running
usb 5-1: USB disconnect, address 2
usb 5-1: new full speed USB device using uhci_hcd and address 3
usb 5-1: configuration #1 chosen from 1 choice
cpufreq-core: setting new policy for CPU 0: 1000000 - 2000000 kHz
freq-table: request for verification of policy (1000000 - 2000000 kHz) for cpu
0
freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0
freq-table: request for verification of policy (1000000 - 2000000 kHz) for cpu
0
freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0
cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 0, event 2
cpufreq-core: __cpufreq_governor for CPU 0, event 1
cpufreq-core: starting governor ondemand failed
cpufreq-core: __cpufreq_governor for CPU 0, event 1
performance: setting to 2000000 kHz because of event 1
cpufreq-core: target for CPU 0: 2000000 kHz, relation 1
freq-table: request for target 2000000 kHz (relation: 1) for cpu 0
freq-table: target is 0 (2000000 kHz, 3116)
speedstep-centrino: couldn't limit to CPUs in this domain
cpufreq-core: setting new policy for CPU 0: 1000000 - 2000000 kHz
freq-table: request for verification of policy (1000000 - 2000000 kHz) for cpu
0
freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0
freq-table: request for verification of policy (1000000 - 2000000 kHz) for cpu
0
freq-table: verification lead to (1000000 - 2000000 kHz) for cpu 0
cpufreq-core: new min and max freqs are 1000000 - 2000000 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 0, event 2
cpufreq-core: __cpufreq_governor for CPU 0, event 1
------------[ cut here ]------------
kernel BUG at drivers/cpufreq/cpufreq_userspace.c:138!
invalid opcode: 0000 [#1]
SMP
Modules linked in: cpufreq_ondemand cpufreq_userspace cpufreq_powersave
speedstep_centrino freq_table rfcomm l2cap bluetooth ppdev parport_pc lp
parport button ac battery xt_mac xt_tcpudp ip6table_filter ip6_tables
xt_state xt_pkttype iptable_raw xt_CLASSIFY xt_CONNMARK xt_MARK xt_length
xt_connmark xt_physdev bridge xt_policy xt_multiport xt_conntrack
iptable_mangle ipt_ULOG ipt_TTL ipt_ttl ipt_TOS ipt_tos ipt_TCPMSS ipt_SAME
ipt_REJECT ipt_REDIRECT ipt_recent ipt_owner ipt_NETMAP ipt_MASQUERADE
ipt_LOG ipt_iprange ipt_hashlimit ipt_ECN ipt_ecn ipt_DSCP ipt_dscp
ipt_CLUSTERIP ipt_ah ipt_addrtype ip_nat_irc ip_nat_tftp ip_nat_ftp
ip_conntrack_irc ip_conntrack_tftp ip_conntrack_ftp iptable_nat ip_nat
ip_conntrack nfnetlink iptable_filter ip_tables x_tables dummy ipv6 nls_utf8
hfsplus dm_snapshot dm_mirror dm_mod fuse sbp2 loop snd_hda_intel
snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm wlan_scan_sta snd_timer
ath_rate_sample snd ath_pci wlan uvcvideo ath_hal i2c_i801 intel_agp rtc
pcspkr sky2 videodev v4l1_compat v4l2_common i2c_core soundcore agpgart
snd_page_alloc tsdev evdev eth1394 ext3 jbd mbcache ide_generic sd_mod usbhid
ide_cd cdrom ata_piix libata scsi_mod ohci1394 ieee1394 generic piix ide_core
ehci_hcd uhci_hcd usbcore thermal processor fan
CPU: 1, VCPU: 0.0
EIP: 0060:[<f929106a>] Tainted: P VLI
EFLAGS: 00010246 (2.6.18+openvz #3)
EIP is at cpufreq_governor_userspace+0x3e/0x1c2 [cpufreq_userspace]
eax: ffffffff ebx: 00000000 ecx: ffffffea edx: 00000000
esi: f6458880 edi: ffffffea ebp: f6458880 esp: f610de18
ds: 007b es: 007b ss: 0068
Process powersaved (pid: 13108, veid: 0, ti=f610c000 task=f6178700
task.ti=f610c000)
Stack: f6458880 00000001 c0215c2e 00000001 c02a9b66 c02a9bcd 00000000 00000001
f610de60 00000000 c02e0920 c0215ddf f9291f40 f64588ac f6458880 f610df2c
c0215fdf 0000000a 00000001 00000002 00000000 001e8480 000f4240 00002710
Call Trace:
[<c0215c2e>] __cpufreq_governor+0x54/0xd1
[<c0215ddf>] __cpufreq_set_policy+0x134/0x197
[<c0215fdf>] store_scaling_governor+0x13e/0x17d
[<c02164c3>] handle_update+0x0/0x20
[<c01b0065>] cfq_kick_queue+0x7c/0x80
[<c0215ea1>] store_scaling_governor+0x0/0x17d
[<c0215666>] store+0x2e/0x3e
[<c01970c1>] sysfs_write_file+0x91/0xb9
[<c0197030>] sysfs_write_file+0x0/0xb9
[<c016107b>] vfs_write+0x83/0x125
[<c01616c7>] sys_write+0x3c/0x9e
[<c0102987>] syscall_call+0x7/0xb
Code: 0f 84 1e 01 00 00 31 c9 4a 0f 85 9b 01 00 00 0f a3 1d 10 96 31 c0 19 c0
b9 ea ff ff ff 85 c0 0f 84 85 01 00 00 83 7e 20 00 75 0b <0f> 0b 66 b8 8a 00
b8 f8 12 29 f9 b8 60 1f 29 f9 e8 e6 e5 fe c6
EIP: [<f929106a>] cpufreq_governor_userspace+0x3e/0x1c2 [cpufreq_userspace]
SS:ESP 0068:f610de18
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
[drm] Initialized i915 1.5.0 20060119 on minor 0
--
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
