Package: kernel-image-2.6.10-powerpc Version: 2.6.10-2 Severity: important The tulip driver should open the loopback on the Apple 100BaseT ethernet card when bringing up the interface. Otherwise the interface is unusable for normal traffic. This can be done by writing 0x10f and 0x3 to CSR12. It's probably wise to check for the apple OUI first as other cards might use the GPIO pins for other purposes. The apple OUI is 00:05:02. Additionally you can check for the chip type being 21140, as apple never made cards with other tulip family chips.
-- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: powerpc (ppc) Kernel: Linux 2.6.9-ans Locale: LANG=C, LC_CTYPE=C Versions of packages kernel-image-2.6.10-powerpc depends on: ii initrd-tools 0.1.77 tools to create initrd image for p ii mkvmlinuz 12 create a kernel to boot a PowerPC ii module-init-tools 3.0-pre5-1 tools for managing Linux kernel mo -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]