Package: linux-image-2.6.22-1-amd64 Version: 2.6.22-3 Severity: normal File: linux-image-2.6.22
The /proc/acpi/alarm interface was obsoleted. The new interface for ACPI wakeup is /sys/class/rtc/rtcX/wakealarm, but it requires enabling a kernel config option. Here is the thread about the interface change: http://lkml.org/lkml/2007/6/19/264 This problem is hitting other distro as well: https://bugzilla.novell.com/show_bug.cgi?id=287539 I will keep my MythTV DVR on 2.6.21 in the meantime. -- Package-specific info: ** Version: Linux version 2.6.22-1-amd64 (Debian 2.6.22-3) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Sun Jul 29 13:54:41 UTC 2007 ** Not tainted ** Kernel log: ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 23, io mem 0xf0102000 SCSI subsystem initialized libata version 2.21 loaded. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 162 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 hda: SAMSUNG SP1614N, ATA DISK drive usb 1-2: new full speed USB device using ohci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice usb 1-10: new low speed USB device using ohci_hcd and address 3 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... usb 1-10: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /class/input/input0 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-10 input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-10 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver hdc: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.10 hda: max request size: 512KiB hda: Host Protected Area detected. current capacity is 312579695 sectors (160040 MB) native capacity is 312581808 sectors (160041 MB) hda: Host Protected Area disabled. hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 firewire_core: created new fw device fw0 (0 config rom retries) Attempting manual resume ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:04.0 to 64 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver intel8x0_measure_ac97_clock: measured 58702 usecs intel8x0: clocking to 46961 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 input: PC Speaker as /class/input/input2 Adding 1052216k swap on /dev/hda6. Priority:-1 extents:1 across:1052216k device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names NET: Registered protocol family 10 lo: Disabled Privacy Extensions pnp: the driver 'parport_pc' has been registered lp: driver loaded but no devices found ppdev: user-space parallel port driver eth0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [drm] Initialized radeon 1.27.0 20060524 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs ** Loaded modules: Module Size Used by radeon 123296 2 drm 100776 3 radeon ppdev 13704 0 parport_pc 42664 0 lp 17352 0 parport 44428 3 ppdev,parport_pc,lp ipv6 296840 10 dm_snapshot 21320 0 dm_mirror 26240 0 dm_mod 63984 2 dm_snapshot,dm_mirror ide_generic 5504 0 [permanent] pcspkr 7680 0 k8temp 10496 0 i2c_nforce2 10624 0 i2c_core 31488 1 i2c_nforce2 usblp 19072 0 evdev 15232 2 snd_intel8x0 41000 1 snd_ac97_codec 117464 1 snd_intel8x0 ac97_bus 7168 1 snd_ac97_codec snd_pcm 89992 2 snd_intel8x0,snd_ac97_codec snd_timer 28424 1 snd_pcm snd 65896 6 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer soundcore 13088 1 snd snd_page_alloc 14608 2 snd_intel8x0,snd_pcm reiserfs 232960 2 ide_cd 44832 0 cdrom 39848 1 ide_cd ide_disk 21888 4 generic 10372 0 [permanent] usbhid 32704 0 hid 31360 1 usbhid floppy 67560 0 amd74xx 19888 0 [permanent] ide_core 147728 5 ide_generic,ide_cd,ide_disk,generic,amd74xx firewire_ohci 22656 0 firewire_core 49472 1 firewire_ohci crc_itu_t 6656 1 firewire_core forcedeth 51848 0 ata_generic 13188 0 libata 132016 1 ata_generic scsi_mod 164536 1 libata ohci_hcd 25860 0 thermal 19600 0 processor 39784 1 thermal fan 9992 0 ** PCI devices: 00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a2) Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev a2) Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:0c11] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2) Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:0c11] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 4 Region 0: I/O ports at ec00 [size=32] Region 4: I/O ports at 1c00 [size=64] Region 5: I/O ports at 1c40 [size=64] Capabilities: <access denied> 00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at f0102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2) Subsystem: Giga-byte Technology Unknown device [1458:ae01] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at d800 [size=256] Region 1: I/O ports at dc00 [size=256] Region 2: Memory at f0100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at f000 [size=16] Capabilities: <access denied> 00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: f0000000-f00fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a2) Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at f0103000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at e800 [size=8] Capabilities: <access denied> 00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: d0000000-efffffff Prefetchable memory behind bridge: 0000000048000000-00000000480fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 01:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller [104c:8025] (rev 01) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-K8N Ultra-9 Mainboard [1458:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0004000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 05:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] [1002:5e4b] (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Unknown device [1002:2302] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at e1000000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at c000 [size=256] [virtual] Expansion ROM at 48000000 [disabled] [size=128K] Capabilities: <access denied> 05:00.1 Display controller [0380]: ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] Secondary [1002:5e6b] Subsystem: ATI Technologies Inc Unknown device [1002:2303] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Region 0: Memory at e1010000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.22-1-amd64 (SMP w/1 CPU core) Locale: LANG=en_CA, LC_CTYPE=en_CA (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.22-1-amd64 depends on: ii e2fsprogs 1.40.2-1 ext2 file system utilities and lib ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo linux-image-2.6.22-1-amd64 recommends no packages. -- debconf information: linux-image-2.6.22-1-amd64/preinst/initrd-2.6.22-1-amd64: linux-image-2.6.22-1-amd64/preinst/lilo-initrd-2.6.22-1-amd64: true linux-image-2.6.22-1-amd64/postinst/old-dir-initrd-link-2.6.22-1-amd64: true linux-image-2.6.22-1-amd64/preinst/abort-install-2.6.22-1-amd64: linux-image-2.6.22-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.22-1-amd64/preinst/overwriting-modules-2.6.22-1-amd64: true linux-image-2.6.22-1-amd64/postinst/bootloader-test-error-2.6.22-1-amd64: linux-image-2.6.22-1-amd64/postinst/create-kimage-link-2.6.22-1-amd64: true linux-image-2.6.22-1-amd64/postinst/old-system-map-link-2.6.22-1-amd64: true linux-image-2.6.22-1-amd64/preinst/elilo-initrd-2.6.22-1-amd64: true linux-image-2.6.22-1-amd64/preinst/lilo-has-ramdisk: shared/kernel-image/really-run-bootloader: true linux-image-2.6.22-1-amd64/preinst/already-running-this-2.6.22-1-amd64: linux-image-2.6.22-1-amd64/postinst/depmod-error-2.6.22-1-amd64: false linux-image-2.6.22-1-amd64/postinst/bootloader-error-2.6.22-1-amd64: linux-image-2.6.22-1-amd64/prerm/would-invalidate-boot-loader-2.6.22-1-amd64: true linux-image-2.6.22-1-amd64/preinst/failed-to-move-modules-2.6.22-1-amd64: linux-image-2.6.22-1-amd64/postinst/old-initrd-link-2.6.22-1-amd64: true linux-image-2.6.22-1-amd64/prerm/removing-running-kernel-2.6.22-1-amd64: true linux-image-2.6.22-1-amd64/preinst/bootloader-initrd-2.6.22-1-amd64: true linux-image-2.6.22-1-amd64/preinst/abort-overwrite-2.6.22-1-amd64: linux-image-2.6.22-1-amd64/postinst/depmod-error-initrd-2.6.22-1-amd64: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
