Package: gspca-modules-2.6.21-2-686 Version: 2.6.21+01.00.18-4 Severity: normal
I try to install my logitech webcam under debian. So I installed the gspca module for my kernel, but when I plug the webcam, I must wait a very long time, as if the module was waiting for something, and the light on the webcam are turn on. I tried to launch camorama or ekiga, but they both freeze. lsusb gives me for the webcam : Bus 003 Device 002: ID 046d:08da Logitech, Inc. dmesg gives me : Linux video capture interface: v2.00 usbcore: registered new interface driver gspca /usr/src/modules/gspca/gspca_core.c: gspca driver 01.00.18 registered usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice /usr/src/modules/gspca/gspca_core.c: USB GSPCA camera found.(ZC3XX) /usr/src/modules/gspca/gspca_core.c: [spca5xx_probe:4098] Camera type JPEG /usr/src/modules/gspca/Vimicro/zc3xx.h: [zc3xx_config:515] Sensor ID:7 /usr/src/modules/gspca/Vimicro/zc3xx.h: [zc3xx_config:597] Find Sensor HV7131R(c) /usr/src/modules/gspca/gspca_core.c: [spca5xx_getcapability:1215] maxw 640 maxh 480 minw 176 minh 144 uhci_hcd 0000:00:1d.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ. usbcore: registered new interface driver snd-usb-audio /usr/src/modules/gspca/gspca_core.c: [spca5xx_set_light_freq:1889] Sensor currently not support light frequency banding filters. /usr/src/modules/gspca/gspca_core.c: [gspca_set_isoc_ep:903] ISO EndPoint found 0x81 AlternateSet 7 ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root /usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler. /usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler. /usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler. /usr/src/modules/gspca/gspca_core.c: [spca50x_isoc_irq:1110] Non-zero status (-18) in isoc completion handler. end_request: I/O error, dev sr0, sector 64 isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16 /usr/src/modules/gspca/gspca_core.c: [spca5xx_set_light_freq:1889] Sensor currently not support light frequency banding filters. /usr/src/modules/gspca/gspca_core.c: [gspca_set_isoc_ep:903] ISO EndPoint found 0x81 AlternateSet 7 usbcore: deregistering interface driver gspca /usr/src/modules/gspca/gspca_core.c: driver gspca deregistered /home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: USB GSPCA camera found.(ZC3XX) /home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [spca5xx_probe:4098] Camera type JPEG /home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/Vimicro/zc3xx.h: [zc3xx_config:515] Sensor ID:7 /home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/Vimicro/zc3xx.h: [zc3xx_config:597] Find Sensor HV7131R(c) /home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [spca5xx_getcapability:1215] maxw 640 maxh 480 minw 176 minh 144 usbcore: registered new interface driver gspca /home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: gspca driver 2.6.21 registered /home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [spca5xx_set_light_freq:1889] Sensor currently not support light frequency banding filters. /home/user/linux-modules-extra-2.6/debian/build/build_i386_none_686_gspca/gspca_core.c: [gspca_set_isoc_ep:903] ISO EndPoint found 0x81 AlternateSet 7 I try with the gspca-module-2.6.21-2-686 and with module assistant, but I obtain the same result. What can I do to play with my webcam ? Regards, adrien -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.21-2-686 (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gspca-modules-2.6.21-2-686 depends on: ii linux-image-2.6.21-2-686 [lin 2.6.21-6 Linux 2.6.21 image on PPro/Celeron gspca-modules-2.6.21-2-686 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
