Package: installation-reports Boot method: Network install using serial console boot: install console=ttyS0,17200
Image version: ftp://ftp.uk.debian.org/debian/dists/etch/main/installer-i386/20070308etch1/images/netboot/mini.iso or: ftp://ftp.uk.debian.org/debian/dists/etch/main/installer-i386/20070308/images/netboot/mini.iso Date: 2007/10/08 10:00 +0100 Machine: Dell PowerEdge SC 1425 Processor: Intel(R) Xeon(TM) CPU 2.80GHz Memory: 516644k Partitions: Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 243 1951866 83 Linux /dev/sda2 244 9726 76172197+ 5 Extended /dev/sda5 244 1459 9767488+ 83 Linux /dev/sda6 1460 2675 9767488+ 83 Linux /dev/sda7 2676 3891 9767488+ 83 Linux /dev/sda8 3892 4499 4883728+ 82 Linux swap / Solaris /dev/sda9 4500 4864 2931831 83 Linux /dev/sda10 4865 6080 9767488+ 83 Linux /dev/sda11 6081 7296 9767488+ 83 Linux /dev/sda12 7297 8512 9767488+ 83 Linux /dev/sda13 8513 9726 9751423+ 83 Linux Output of lspci -nn and lspci -vnn: # lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 09) 00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 09) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) 01:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) 01:00.1 PIC [0800]: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A [8086:0326] (rev 09) 01:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) 01:00.3 PIC [0800]: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B [8086:0327] (rev 09) 02:04.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05) 04:03.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05) 04:0d.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] # lspci -vnn 00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 09) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, fast devsel, latency 0 Capabilities: [40] Vendor Specific Information 00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dfb00000-dfefffff Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable- Capabilities: [64] Express Root Port (Slot-) IRQ 0 Capabilities: [100] Advanced Error Reporting 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, medium devsel, latency 0, IRQ 169 I/O ports at cce0 [size=32] 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, medium devsel, latency 0, IRQ 185 I/O ports at ccc0 [size=32] 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, medium devsel, latency 0, IRQ 201 Memory at dff00000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: df900000-dfafffff Prefetchable memory behind bridge: d0000000-d7ffffff 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, medium devsel, latency 0, IRQ 209 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at fc00 [size=16] Memory at 20000000 (32-bit, non-prefetchable) [size=1K] 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 209 I/O ports at ccb8 [size=8] I/O ports at ccb0 [size=4] I/O ports at cca0 [size=8] I/O ports at cc98 [size=4] I/O ports at cc80 [size=16] 01:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=01, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: dfd00000-dfefffff Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [6c] Power Management version 2 Capabilities: [d8] PCI-X bridge device Capabilities: [100] Advanced Error Reporting Capabilities: [300] Power Budgeting 01:00.1 PIC [0800]: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A [8086:0326] (rev 09) (prog-if 20 [IO(X)-APIC]) Flags: bus master, fast devsel, latency 0 Memory at dfbff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Express Endpoint IRQ 0 Capabilities: [6c] Power Management version 2 01:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=01, secondary=03, subordinate=03, sec-latency=64 Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0 Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [6c] Power Management version 2 Capabilities: [d8] PCI-X bridge device Capabilities: [100] Advanced Error Reporting Capabilities: [300] Power Budgeting 01:00.3 PIC [0800]: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B [8086:0327] (rev 09) (prog-if 20 [IO(X)-APIC]) Flags: bus master, fast devsel, latency 0 Memory at dfbfe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Express Endpoint IRQ 0 Capabilities: [6c] Power Management version 2 02:04.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 177 Memory at dfde0000 (32-bit, non-prefetchable) [size=128K] I/O ports at ecc0 [size=64] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device 04:03.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 193 Memory at df9e0000 (32-bit, non-prefetchable) [size=128K] I/O ports at dcc0 [size=64] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device 04:0d.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA]) Subsystem: Dell PowerEdge SC1425 [1028:019a] Flags: bus master, VGA palette snoop, stepping, medium devsel, latency 32, IRQ 11 Memory at d0000000 (32-bit, prefetchable) [size=128M] I/O ports at d800 [size=256] Memory at df9d0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at df900000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: The system booted just fine, but GRUB had bein configued with the following at the top of /boot/grub/menu.lst: serial --unit=0 --speed=19200 --word=console=ttyS0,19200 --parity= --stop=1 terminal serial As the word and parity are not configured correctly GRUB still worked but sent it's output to the attached monitor not to the serial port. I changed the top line to: serial --unit=0 --speed=19200 --word=8 --parity=no --stop=1 and GRUB then worked as expected. Steve
signature.asc
Description: Digital signature