Package: linux-image-2.6.24-1-686 Version: 2.6.24-2 Severity: normal Hello,
After installing this new kernel image, hwclock could not work now. For example, hwclock --systohc will report select() to /dev/rtc to wait for clock tick timed out As a result, /etc/init.d/hwclock.sh will fail and the system clock may be incorrect. But, if --directisa is used, the problem is gone. Is this a duplicated or related bug with #277298? Thanks. -- Package-specific info: ** Version: Linux version 2.6.24-1-686 (Debian 2.6.24-2) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu Jan 31 20:35:50 UTC 2008 ** Command line: root=/dev/sda3 ro ** Not tainted ** Kernel log: sda:<4>Driver 'sr' needs updating - please use bus_type methods sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Attempting manual resume swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input2 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Non-volatile memory driver v1.2 parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] Linux agpgart interface v0.102 intel_rng: FWH not detected thinkpad_acpi: ThinkPad ACPI Extras v0.17 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 1YET65WW (1.29 ), EC 1YHT26WW-1.03 thinkpad_acpi: IBM ThinkPad T43 thinkpad_acpi: another device driver is already handling bay events thinkpad_acpi: disabling subdriver bay thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode input: ThinkPad Extra Buttons as /class/input/input3 input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 19 irda_init() NET: Registered protocol family 23 Yenta: CardBus bridge found at 0000:0b:00.0 [1014:056c] Yenta: ISA IRQ mask 0x0438, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff cs: IO port probe 0x5000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xb4000000 - 0xbfffffff pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:0b:02.0[A] -> GSI 21 (level, low) -> IRQ 23 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: Video Bus as /class/input/input7 ACPI: AC Adapter [AC] (on-line) input: SynPS/2 Synaptics TouchPad as /class/input/input8 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Battery Slot [BAT0] (battery absent) nsc-ircc 00:0c: activated nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. nsc-ircc, chip->init nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) IrDA: Registered device irda0 nsc-ircc, Found dongle: No dongle connected nsc_ircc_init_dongle_interface(), No dongle connected ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1e.3 to 64 MC'97 1 converters and GPIO not ready (0xff00) cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1e.2 to 64 cs: IO port probe 0xa00-0xaff: clean. intel8x0_measure_ac97_clock: measured 55505 usecs intel8x0: clocking to 48000 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input9 Adding 1012052k swap on /dev/sda5. Priority:-1 extents:1 across:1012052k EXT3 FS on sda3, internal journal fuse init (API version 7.9) tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. NET: Registered protocol family 10 lo: Disabled Privacy Extensions lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.28.0 20060524 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs ** Loaded modules: Module Size Used by radeon 112096 2 drm 74036 3 radeon ppdev 8804 0 lp 11076 0 ipv6 240772 14 fuse 45204 1 irtty_sir 8096 0 sir_dev 15460 1 irtty_sir joydev 11360 0 pcmcia 37036 0 snd_intel8x0 32028 1 snd_intel8x0m 16844 0 snd_ac97_codec 92932 2 snd_intel8x0,snd_intel8x0m ac97_bus 2176 1 snd_ac97_codec snd_pcm_oss 38272 0 snd_pcm 71780 4 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss snd_mixer_oss 15296 1 snd_pcm_oss snd_seq_dummy 3780 0 snd_seq_oss 29472 0 battery 8640 0 ac 4544 0 snd_seq_midi 8160 0 video 18672 0 output 3744 1 video snd_rawmidi 22624 1 snd_seq_midi snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi ipw2200 134568 0 snd_seq 46544 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event ieee80211 31048 1 ipw2200 ieee80211_crypt 5888 1 ieee80211 snd_timer 21092 2 snd_pcm,snd_seq snd_seq_device 7820 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq nsc_ircc 21328 0 firmware_class 9408 2 pcmcia,ipw2200 yenta_socket 24844 1 rsrc_nonstatic 11872 1 yenta_socket pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic irda 174236 3 irtty_sir,sir_dev,nsc_ircc i2c_i801 9232 0 psmouse 36464 0 button 8432 0 snd 48612 13 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device thinkpad_acpi 48028 0 intel_agp 23412 0 agpgart 31688 2 drm,intel_agp crc_ccitt 2176 1 irda i2c_core 22432 1 i2c_i801 serio_raw 6660 0 soundcore 7552 1 snd evdev 11104 7 parport_pc 33668 1 parport 34280 3 ppdev,lp,parport_pc nvram 8488 2 thinkpad_acpi iTCO_wdt 11268 0 snd_page_alloc 10056 3 snd_intel8x0,snd_intel8x0m,snd_pcm pcspkr 3200 0 rtc 13052 0 ext3 122920 1 jbd 43732 1 ext3 mbcache 8288 1 ext3 sg 33264 0 sr_mod 16708 0 cdrom 32512 1 sr_mod sd_mod 27104 3 usbhid 28096 0 hid 34272 1 usbhid ata_piix 17092 2 ahci 26116 0 ata_generic 7428 0 libata 144464 3 ata_piix,ahci,ata_generic scsi_mod 141196 4 sg,sr_mod,sd_mod,libata floppy 54628 0 generic 4388 0 [permanent] ide_core 108292 1 generic ehci_hcd 32524 0 uhci_hcd 23376 0 usbcore 132940 4 usbhid,ehci_hcd,uhci_hcd tg3 88964 0 thermal 16028 0 processor 36520 2 thermal fan 4772 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: IBM Unknown device [1014:0575] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: b0100000-b01fffff Prefetchable memory behind bridge: c0000000-c7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: b0200000-b02fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=0a, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: b2000000-b3ffffff Prefetchable memory behind bridge: 00000000c8000000-00000000c80fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI]) Subsystem: IBM Unknown device [1014:0565] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI]) Subsystem: IBM Unknown device [1014:0565] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI]) Subsystem: IBM Unknown device [1014:0565] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI]) Subsystem: IBM Unknown device [1014:0565] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 22 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI]) Subsystem: IBM Unknown device [1014:0566] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 22 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0b, subordinate=0e, sec-latency=64 I/O behind bridge: 00005000-00008fff Memory behind bridge: b4000000-bfffffff Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03) Subsystem: IBM Unknown device [1014:0567] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 1880 [size=64] Region 2: Memory at b0000800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at b0000400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03) (prog-if 00 [Generic]) Subsystem: IBM Unknown device [1014:0576] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH Modem Kernel modules: snd-intel8x0m 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03) Subsystem: IBM Unknown device [1014:0568] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: intel-rng, iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 03) (prog-if 80 [Master]) Subsystem: IBM Unknown device [1014:056a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 18c0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ahci, ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03) Subsystem: IBM Unknown device [1014:056b] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 19 Region 4: I/O ports at 18e0 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M22 [Mobility Radeon X300] [1002:5460] (prog-if 00 [VGA controller]) Subsystem: IBM Unknown device [1014:056e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at b0100000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at b0120000 [disabled] [size=128K] Capabilities: <access denied> Kernel modules: radeonfb 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express [14e4:167d] (rev 11) Subsystem: IBM Unknown device [1014:0577] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0200000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 0b:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 8d) Subsystem: IBM Unknown device [1014:056c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b4000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=0b, secondary=0c, subordinate=0d, sec-latency=176 Memory window 0: d0000000-d3fff000 (prefetchable) Memory window 1: b8000000-bbfff000 I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 0b:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation Unknown device [8086:2712] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at b4001000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 Kernel modules: ipw2200 -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-686 depends on: ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-1-686 recommends: ii libc6-i686 2.7-6 GNU C Library: Shared libraries [i -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686: linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk: linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686: linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686: linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/kimage-is-a-directory: linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]