Package: linux-image-2.6.24-1-powerpc Version: 2.6.24-2 Severity: normal Hi,
The "b43legacy" driver produces an oops on my system (an Apple PowerBook G4, 1.3Ghz). Please see the kernel dmesg output below for details. (or ask me, if that's not enough...) -- Package-specific info: ** Version: Linux version 2.6.24-1-powerpc (Debian 2.6.24-2) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 Thu Jan 31 18:52:10 CET 2008 ** Command line: root=/dev/hda5 ro resume=/dev/hda3 ** Tainted: G (128) ** Kernel log: b43-phy0: Broadcom 4306 WLAN found phy0: Selected rate control algorithm 'simple' udev: renamed network interface wmaster0 to eth1 Adding 1009972k swap on /dev/hda3. Priority:-1 extents:1 across:1009972k EXT3 FS on hda5, internal journal input: PowerMac Beep as /class/input/input7 adt746x: version 1 (supported) adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1 sensor 0: HDD BOTTOMSIDE sensor 1: CPU TOPSIDE sensor 2: GPU ON DIE adt746x: ADT7460 initializing adt746x: Lowering max temperatures from 73, 80, 109 to 70, 50, 70 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only. RPC: Registered udp transport module. RPC: Registered tcp transport module. NET: Registered protocol family 10 lo: Disabled Privacy Extensions lp: driver loaded but no devices found ADDRCONF(NETDEV_UP): eth0: link is not ready Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period hda: host max PIO4 wanted PIO0 selected PIO0 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized usb 1-1: USB disconnect, address 2 Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 usb 1-1: new full speed USB device using ohci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb hda: host max PIO4 wanted PIO0 selected PIO0 hda: host max PIO4 wanted PIO0 selected PIO0 hda: host max PIO4 wanted PIO0 selected PIO0 hda: host max PIO4 wanted PIO0 selected PIO0 hda: host max PIO4 wanted PIO0 selected PIO0 hda: host max PIO4 wanted PIO0 selected PIO0 hda: host max PIO4 wanted PIO0 selected PIO0 hda: host max PIO4 wanted PIO0 selected PIO0 hda: host max PIO4 wanted PIO0 selected PIO0 usb 2-1: new low speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice input: Logitech Optical USB Mouse as /class/input/input8 input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0001:10:1b.0-1 hda: host max PIO4 wanted PIO0 selected PIO0 hda: host max PIO4 wanted PIO0 selected PIO0 b43-phy1: Broadcom 4306 WLAN found phy1: Selected rate control algorithm 'simple' udev: renamed network interface wmaster0 to eth1 input: b43-phy1 as /class/input/input9 b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. b43-phy1 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). input: b43-phy1 as /class/input/input10 b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. b43-phy1 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). input: b43-phy1 as /class/input/input11 b43-phy1 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. b43-phy1 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4). hda: host max PIO4 wanted PIO0 selected PIO0 eth0: Link is up at 100 Mbps, half-duplex. eth0: Pause is disabled ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: Link is up at 100 Mbps, half-duplex. eth0: Pause is disabled hda: host max PIO4 wanted PIO0 selected PIO0 Unable to handle kernel paging request for instruction fetch Faulting instruction address: 0xf6253b14 Oops: Kernel access of bad area, sig: 11 [#1] PowerMac Modules linked in: rfkill_input binfmt_misc hci_usb rfcomm l2cap bluetooth nfsd exportfs lp parport autofs4 ipv6 rpcsec_gss_krb5 auth_rpcgss nfs lockd nfs_acl sunrpc nls_utf8 hfsplus dm_crypt dm_mirror cpufreq_conservative cpufreq_ondemand cpufreq_powersave dm_snapshot dm_mod therm_adt746x snd_powermac cpufreq_userspace snd_aoa_i2sbus snd_pcm_oss snd_pcm snd_page_alloc snd_mixer_oss snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event arc4 snd_seq snd_timer snd_seq_device ecb blkcipher snd soundcore snd_aoa_soundbus rfkill uninorth_agp agpgart mac80211 evdev cfg80211 input_polldev ext3 jbd mbcache firewire_ohci sungem sungem_phy firewire_core crc_itu_t ide_disk ehci_hcd usbhid ide_cd hid ff_memless cdrom ssb pcmcia pcmcia_core firmware_class i2c_powermac NIP: f6253b14 LR: f2088158 CTR: f6253b14 REGS: ee7ffeb0 TRAP: 0400 Not tainted (2.6.24-1-powerpc) MSR: 40009032 <EE,ME,IR,DR> CR: 24000084 XER: 00000000 TASK = ef912f30[10060] 'ipolldevd' THREAD: ee7fe000 GPR00: f6253b14 ee7fff60 ef912f30 eefca6a0 ee7fffa8 00000001 00005ec0 0000039e GPR08: ee7fffb4 ee968760 eefca6b8 ffffffff 00000000 00000000 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 016ecff8 41400000 016eeea0 GPR24: 00000000 003f1000 c03ac4b0 eefca6b4 c03b0000 eefca6a0 f2088130 ee968760 NIP [f6253b14] 0xf6253b14 LR [f2088158] input_polled_device_work+0x28/0x5c [input_polldev] Call Trace: [ee7fff60] [c0008a28] __switch_to+0x74/0x8c (unreliable) [ee7fff80] [c0042268] run_workqueue+0xb4/0x148 [ee7fffa0] [c0042834] worker_thread+0xd8/0xf4 [ee7fffd0] [c0046844] kthread+0x4c/0x88 [ee7ffff0] [c0013404] kernel_thread+0x44/0x60 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace c82e7ba47a431aec ]--- ** Loaded modules: Module Size Used by rfkill_input 4800 0 binfmt_misc 13256 1 hci_usb 16796 2 rfcomm 45524 5 l2cap 25956 9 rfcomm bluetooth 67916 7 hci_usb,rfcomm,l2cap nfsd 248404 13 exportfs 5248 1 nfsd lp 13548 0 parport 43472 1 lp autofs4 24932 1 ipv6 295860 41 rpcsec_gss_krb5 10760 0 auth_rpcgss 48260 2 nfsd,rpcsec_gss_krb5 nfs 294856 0 lockd 77752 3 nfsd,nfs nfs_acl 4032 2 nfsd,nfs sunrpc 213516 12 nfsd,rpcsec_gss_krb5,auth_rpcgss,nfs,lockd,nfs_acl nls_utf8 2208 1 hfsplus 92516 1 dm_crypt 16836 0 dm_mirror 25728 0 cpufreq_conservative 8864 0 cpufreq_ondemand 9544 0 cpufreq_powersave 1824 0 dm_snapshot 21184 0 dm_mod 70180 3 dm_crypt,dm_mirror,dm_snapshot therm_adt746x 13612 0 snd_powermac 48416 2 cpufreq_userspace 4760 1 snd_aoa_i2sbus 24388 0 snd_pcm_oss 49216 1 snd_pcm 92100 3 snd_powermac,snd_aoa_i2sbus,snd_pcm_oss snd_page_alloc 11912 1 snd_pcm snd_mixer_oss 20384 1 snd_pcm_oss snd_seq_oss 39700 0 snd_seq_midi 9600 0 snd_rawmidi 28352 1 snd_seq_midi snd_seq_midi_event 8160 2 snd_seq_oss,snd_seq_midi arc4 1984 0 snd_seq 61064 5 snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 26180 2 snd_pcm,snd_seq snd_seq_device 9452 4 snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq ecb 4064 0 blkcipher 8388 1 ecb snd 67668 12 snd_powermac,snd_aoa_i2sbus,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 8900 2 snd snd_aoa_soundbus 7620 1 snd_aoa_i2sbus rfkill 9008 4 rfkill_input uninorth_agp 11692 1 agpgart 40156 1 uninorth_agp mac80211 143486 0 evdev 13984 17 cfg80211 16688 1 mac80211 input_polldev 5832 0 ext3 156328 1 jbd 56212 1 ext3 mbcache 9568 1 ext3 firewire_ohci 22464 0 sungem 35268 0 sungem_phy 12928 1 sungem firewire_core 49912 1 firewire_ohci crc_itu_t 2112 1 firewire_core ide_disk 18816 4 ehci_hcd 38892 0 usbhid 49252 0 ide_cd 47108 0 hid 44036 1 usbhid ff_memless 6184 1 usbhid cdrom 42812 1 ide_cd ssb 40132 0 pcmcia 45872 1 ssb pcmcia_core 46904 1 pcmcia firmware_class 11104 1 pcmcia i2c_powermac 5984 0 ** PCI devices: 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Capabilities: <access denied> Kernel driver in use: agpgart-uninorth Kernel modules: uninorth-agp 0000:00:10.0 VGA compatible controller [0300]: nVidia Corporation NV34M [GeForce FX Go5200] [10de:0329] (rev a1) (prog-if 00 [VGA controller]) Subsystem: nVidia Corporation Powerbook G4 [10de:0010] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 48 Region 0: Memory at 91000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at a0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at 90000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidiafb 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Kernel modules: uninorth-agp 0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Subsystem: Apple Computer Inc. AirPort Extreme [106b:004e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 Interrupt: pin A routed to IRQ 52 Region 0: Memory at 80084000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: b43-pci-bridge Kernel modules: ssb 0001:10:17.0 Unknown class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K] Kernel driver in use: macio 0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 27 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 28 0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 29 Region 0: Memory at 80083000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 63 Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI]) Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 63 Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI]) Subsystem: NEC Corporation USB 2.0 [1033:00e0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 63 Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 0002:20:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Kernel modules: uninorth-agp 0002:20:0d.0 Unknown class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin ? routed to IRQ 39 Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K] Kernel driver in use: ide-pmac 0002:20:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI]) Subsystem: Apple Computer Inc. iBook G4 2004 [106b:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 0002:20:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at f5100000 [disabled] [size=1M] Kernel driver in use: gem Kernel modules: sungem -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: powerpc (ppc) Kernel: Linux 2.6.24-1-powerpc Locale: LANG=nl_BE.UTF-8, LC_CTYPE=nl_BE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-powerpc depends on: ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo ii yaird [linux-initramfs-tool] 0.0.12-25 Yet Another mkInitRD linux-image-2.6.24-1-powerpc recommends no packages. -- debconf information: linux-image-2.6.24-1-powerpc/postinst/bootloader-test-error-2.6.24-1-powerpc: linux-image-2.6.24-1-powerpc/postinst/depmod-error-2.6.24-1-powerpc: false linux-image-2.6.24-1-powerpc/preinst/lilo-initrd-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/prerm/removing-running-kernel-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/preinst/initrd-2.6.24-1-powerpc: linux-image-2.6.24-1-powerpc/preinst/overwriting-modules-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/postinst/old-initrd-link-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/preinst/elilo-initrd-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/preinst/abort-overwrite-2.6.24-1-powerpc: linux-image-2.6.24-1-powerpc/preinst/bootloader-initrd-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/preinst/lilo-has-ramdisk: linux-image-2.6.24-1-powerpc/preinst/abort-install-2.6.24-1-powerpc: shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-powerpc/preinst/failed-to-move-modules-2.6.24-1-powerpc: linux-image-2.6.24-1-powerpc/postinst/create-kimage-link-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/postinst/old-dir-initrd-link-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/prerm/would-invalidate-boot-loader-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/postinst/old-system-map-link-2.6.24-1-powerpc: true linux-image-2.6.24-1-powerpc/postinst/depmod-error-initrd-2.6.24-1-powerpc: false linux-image-2.6.24-1-powerpc/postinst/kimage-is-a-directory: linux-image-2.6.24-1-powerpc/postinst/bootloader-error-2.6.24-1-powerpc: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]