Kevin Locke a écrit :
I am noticing the same behavior on my system (using iwl3945 on a
Thinkpad T60p with the Intel 3945ABG card). That includes the "0
packets captured" on the interface during DHCP request. However, I
noticed that if I run `ifconfig wlan0 up` before running `ifup wlan0`
it seems to resolve the problem and the computer receives a DHCP
response from my DHCP server with no problems. It may be related to
the fact that settings applied with iwconfig do not appear to stick
unless the interface is up.
I would be interested to hear if this makes a difference on any other
systems...
Hi Kevin,
I tested this on a 2-6-24-1 and on 2-6-24-trunk, no luck. :-( I also
notice that on 2.6.23/24/trunk ifup is going in segfault error 4:-(
ifconfig eth0 -Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)- is
working in 2.6.24 and trunk. To summarize:
2.6.23: no more eth0, wifi is working with ipw3945
2.6.24 and trunk: eth0 is working _only_ with ifconfig, no more wifi
All kernels: ifup is segfaulting: ifup[5587]: segfault at 0 rip
2aed2d3bb3b2 rsp 7fff7d9a9c90 error 4
--
Daniel
