Package: linux-image-2.6.24-1-amd64 Version: 2.6.24-3 Severity: important I own a Broadcom bcm4311 rev 2 WLAN-Card. To run this card with the b43 driver the kernel 2.6.24 needs patches. The issue is described in[1]. The patch you can download from[2]. Please inlcude the patches in the next release of 2.6.24 images so i can use 2.6.24 with wlan on my machine.
For the moment i must unload b43 and ssb in order to load ndiswrapper for run my wlan-device. -- Package-specific info: ** Version: Linux version 2.6.24-1-amd64 (Debian 2.6.24-3) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Wed Feb 6 14:31:28 UTC 2008 ** Command line: root=/dev/sda1 ro ** Tainted: P (1) ** Kernel log: swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: PC Speaker as /class/input/input2 pnp: the driver 'tpm_inf_pnp' has been registered tpm_inf_pnp 00:02: Found C231 with ID IFX0102 tpm_inf_pnp 00:02: TPM found: config base 0x520, data base 0x530, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) tpm_inf_pnp 00:02: driver attached shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: EC: non-query interrupt received, switching to interrupt mode si3054: cannot initialize. EXT MID = 0000 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [C28D] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [C265] ACPI: AC Adapter [C1EB] (off-line) Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c2] ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) Yenta: ISA IRQ mask 0x0cb8, PCI irq 20 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd03fffff Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input6 input: Video Bus as /class/input/input7 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) Adding 4883720k swap on /dev/sda5. Priority:-1 extents:1 across:4883720k EXT3 FS on sda1, internal journal loop: module loaded device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-64 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x11 powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x12 powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x13 powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0x14 powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x1e powernow-k8: ph2 null fid transition 0xe pnp: the driver 'parport_pc' has been registered lp: driver loaded but no devices found ppdev: user-space parallel port driver hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xef Clocksource tsc unstable (delta = -112351453 ns) Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xef fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 1768 MBytes. [fglrx] ASYNCIO init succeed! [fglrx] PAT is enabled successfully! [fglrx] module loaded - fglrx 8.45.4 [Jan 16 2008] on minor 0 ACPI: PCI Interrupt 0000:01:05.0[B] -> GSI 19 (level, low) -> IRQ 19 [fglrx] GART Table is not in FRAME_BUFFER range [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000 [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 ndiswrapper version 1.51 loaded (smp=yes, preempt=no) usbcore: registered new interface driver ndiswrapper usbcore: deregistering interface driver ndiswrapper ACPI: PCI interrupt for device 0000:30:00.0 disabled ndiswrapper version 1.51 loaded (smp=yes, preempt=no) ndiswrapper (link_pe_images:576): fixing KI_USER_SHARED_DATA address in the driver ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:30:00.0 to 64 ndiswrapper: using IRQ 18 wlan0: ethernet device 00:1a:73:ac:da:15 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK usbcore: registered new interface driver ndiswrapper hda-intel: Invalid position buffer, using LPIB read method instead. usbcore: deregistering interface driver hci_usb APIC error on CPU0: 00(40) APIC error on CPU1: 00(40) ** Loaded modules: Module Size Used by ndiswrapper 226496 0 fglrx 1730780 18 binfmt_misc 17292 1 rfcomm 46240 2 l2cap 29568 9 rfcomm ppdev 13832 0 parport_pc 42408 0 lp 17476 0 parport 44812 3 ppdev,parport_pc,lp powernow_k8 18464 1 cpufreq_stats 10528 0 cpufreq_conservative 13320 0 cpufreq_userspace 9604 0 cpufreq_ondemand 13712 1 freq_table 9728 3 powernow_k8,cpufreq_stats,cpufreq_ondemand cpufreq_powersave 6272 0 dm_snapshot 21960 0 dm_mirror 27008 0 dm_mod 67832 2 dm_snapshot,dm_mirror rfkill 12816 0 mac80211 132236 0 cfg80211 19856 1 mac80211 led_class 10120 0 input_polldev 9872 0 firewire_sbp2 20624 0 loop 22788 0 joydev 17536 0 bluetooth 65540 4 rfcomm,l2cap video 25620 0 output 8704 1 video container 9856 0 psmouse 45724 0 serio_raw 11908 0 yenta_socket 31756 1 rsrc_nonstatic 16128 1 yenta_socket battery 19976 0 ac 11400 0 button 13984 0 snd_hda_intel 362024 3 i2c_piix4 13708 0 snd_pcm 89352 2 snd_hda_intel snd_timer 28552 2 snd_pcm snd 65896 7 snd_hda_intel,snd_pcm,snd_timer soundcore 13216 1 snd shpchp 38428 0 tpm_infineon 14396 0 tpm 21792 1 tpm_infineon tpm_bios 12160 1 tpm i2c_core 29824 1 i2c_piix4 k8temp 10496 0 pcspkr 7808 0 snd_page_alloc 15248 2 snd_hda_intel,snd_pcm pci_hotplug 35504 1 shpchp evdev 17024 6 ext3 139024 3 jbd 55976 1 ext3 mbcache 13952 1 ext3 ide_cd 44704 0 cdrom 39464 1 ide_cd sd_mod 33408 5 ata_generic 13060 0 firewire_ohci 24192 0 firewire_core 49472 2 firewire_sbp2,firewire_ohci crc_itu_t 6656 1 firewire_core pcmcia 45720 0 pcmcia_core 46500 3 yenta_socket,rsrc_nonstatic,pcmcia firmware_class 15232 1 pcmcia tg3 100612 0 generic 9732 0 [permanent] ahci 34436 4 ohci_hcd 28164 0 atiixp 9488 0 [permanent] ide_core 144920 3 ide_cd,generic,atiixp ehci_hcd 39692 0 libata 162736 2 ata_generic,ahci scsi_mod 170296 3 firewire_sbp2,sd_mod,libata thermal 22688 1 processor 45032 2 powernow_k8,thermal fan 9864 1 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910] Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d0400000-d05fffff Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 00:04.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:7914] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 Memory behind bridge: d0000000-d00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:05.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:7915] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=20, subordinate=20, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: cc000000-cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=30, subordinate=30, sec-latency=0 Memory behind bridge: c8000000-c80fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 9000 [size=8] Region 1: I/O ports at 9008 [size=4] Region 2: I/O ports at 9010 [size=8] Region 3: I/O ports at 5018 [size=4] Region 4: I/O ports at 5020 [size=16] Region 5: Memory at d0609000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at d0601000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at d0602000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 17 Region 0: Memory at d0603000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at d0604000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 17 Region 0: Memory at d0605000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 23 Region 0: Memory at d0606000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 8200 [size=16] Capabilities: <access denied> Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 82 [Master PriP]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 5040 [size=16] Kernel driver in use: ATIIXP_IDE Kernel modules: atiixp, generic, ata_generic 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383] Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at 88000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=02, subordinate=06, sec-latency=64 Memory behind bridge: d0100000-d03fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp Kernel modules: k8temp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 2: Memory at d0400000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at 4000 [size=256] Region 5: Memory at d0500000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: fglrx_pci Kernel modules: fglrx 02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 20 Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 8c000000-8ffff000 (prefetchable) Memory window 1: 90000000-93fff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 02:04.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 02) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at d0101000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 10:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1276 Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 30:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan mini-PCI [14e4:4311] (rev 02) Subsystem: Hewlett-Packard Company Unknown device [103c:1375] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ndiswrapper Kernel modules: ssb -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo linux-image-2.6.24-1-amd64 recommends no packages. -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64: false linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]