Package: d-i
Version: nightly build 20050516
Severity: normal

I saw this problems on IBM x206 SATA and on a computer with ABIT as8-v.

The problem is that ata_piix is loaded before ide-generic. With this I
see only disks. If I load everything but ide-generic, then ide-generic I
ca see the ide PATA cdrom drive.

Attached lspci -vvv for x206 and for abit.


-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-1-686
Locale: LANG=C, LC_CTYPE=fr_FR (charmap=ISO-8859-1)

-- 
Emmanuel Lacour ------------------------------------ Easter-eggs
44-46 rue de l'Ouest  -  75014 Paris   -   France -  Métro Gaité
Phone: +33 (0) 1 43 35 00 37    -     Fax: +33 (0) 1 41 35 00 76
mailto:[EMAIL PROTECTED]   -    http://www.easter-eggs.com
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
        Subsystem: IBM: Unknown device 02ae
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at d2000000 (32-bit, prefetchable) [size=32M]
        Capabilities: <available only to root>

0000:00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 
02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 48
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d0100000-d01fffff
        Prefetchable memory behind bridge: fff00000-000fffff
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02) 
(prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 48, Cache Line Size: 0x10 (64 bytes)
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: fff00000-000fffff
        Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: <available only to root>

0000:00:1d.0 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller 
(rev 02) (prog-if 00 [UHCI])
        Subsystem: IBM: Unknown device 02ad
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 169
        Region 4: I/O ports at 1400 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller 
(rev 02) (prog-if 00 [UHCI])
        Subsystem: IBM: Unknown device 02ad
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 177
        Region 4: I/O ports at 1420 [size=32]

0000:00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev 02)
        Subsystem: IBM: Unknown device 02ad
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16]

0000:00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable Interrupt 
Controller (rev 02) (prog-if 20 [IO(X)-APIC])
        Subsystem: IBM: Unknown device 02ad
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: <available only to root>

0000:00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host Controller 
(rev 02) (prog-if 20 [EHCI])
        Subsystem: IBM: Unknown device 02ad
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 185
        Region 0: Memory at d0000400 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <available only to root>

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a) (prog-if 00 
[Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d0200000-d02fffff
        Prefetchable memory behind bridge: e0000000-efffffff
        BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:1f.2 IDE interface: Intel Corp. 6300ESB SATA Storage Controller (rev 
02) (prog-if 8a [Master SecP PriP])
        Subsystem: IBM: Unknown device 02ad
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 193
        Region 0: I/O ports at <unassigned>
        Region 1: I/O ports at <unassigned>
        Region 2: I/O ports at <unassigned>
        Region 3: I/O ports at <unassigned>
        Region 4: I/O ports at 1470 [size=16]

0000:00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02)
        Subsystem: IBM: Unknown device 02ad
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 201
        Region 4: I/O ports at 1440 [size=32]

0000:02:01.0 Ethernet controller: Intel Corp. 82547GI Gigabit Ethernet 
Controller
        Subsystem: IBM: Unknown device 02ad
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (63750ns min), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 193
        Region 0: Memory at d0120000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at d0100000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at 2000 [size=32]
        Capabilities: <available only to root>

0000:04:02.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY 
[Radeon 7000/VE] (prog-if 00 [VGA])
        Subsystem: IBM: Unknown device 02c8
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR+ FastB2B+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 66 (2000ns min), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 169
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Region 1: I/O ports at 3000 [size=256]
        Region 2: Memory at d0200000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: <available only to root>

0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub 
Interface (rev 02)
        Subsystem: ABIT Computer Corp.: Unknown device 1049
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Capabilities: <available only to root>

0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02) 
(prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: f8000000-f9ffffff
        Prefetchable memory behind bridge: f0000000-f7ffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 
(rev 02) (prog-if 00 [UHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1049
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 169
        Region 4: I/O ports at bc00 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 
(rev 02) (prog-if 00 [UHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1049
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 177
        Region 4: I/O ports at b000 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 
(rev 02) (prog-if 00 [UHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1049
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 185
        Region 4: I/O ports at b400 [size=32]

0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 
(rev 02) (prog-if 00 [UHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1049
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 169
        Region 4: I/O ports at b800 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI 
Controller (rev 02) (prog-if 20 [EHCI])
        Subsystem: ABIT Computer Corp.: Unknown device 1049
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 193
        Region 0: Memory at fa100000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <available only to root>

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 
[Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fa000000-fa0fffff
        Prefetchable memory behind bridge: fff00000-000fffff
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage 
Controller (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: ABIT Computer Corp.: Unknown device 1049
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 185
        Region 0: I/O ports at <unassigned>
        Region 1: I/O ports at <unassigned>
        Region 2: I/O ports at <unassigned>
        Region 3: I/O ports at <unassigned>
        Region 4: I/O ports at f000 [size=16]

0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 
02)
        Subsystem: ABIT Computer Corp.: Unknown device 1049
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 201
        Region 4: I/O ports at 0500 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) 
AC'97 Audio Controller (rev 02)
        Subsystem: ABIT Computer Corp.: Unknown device 1049
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 201
        Region 0: I/O ports at d800 [size=256]
        Region 1: I/O ports at dc00 [size=64]
        Region 2: Memory at fa101000 (32-bit, non-prefetchable) [size=512]
        Region 3: Memory at fa102000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 
4000 AGP 8x] (rev c1) (prog-if 00 [VGA])
        Subsystem: LeadTek Research Inc.: Unknown device 2937
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 169
        Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: <available only to root>

0000:02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: ABIT Computer Corp.: Unknown device 1049
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 185
        Region 0: I/O ports at a000 [size=256]
        Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

Reply via email to