Package: hotplug Version: 0.0.20040329-22 Severity: normal My problem mainly deals with a PQI high speed usb 2.0 reader (Travel Flash) which I use to read/write SD cards. This is with any brands/capacity of SD cards that I have (from 128mb to 1 gig). When I boot the pc with the card inserted, it is correctly recognized and correct device name is created under /dev/sdd1. Also, when the computer is already started, if I plug in the card, it usually detects and correct device name is created about 80% of the time.
However, when I remove the card and reinsert it, correct device name in /dev/ is not created. It might work the first (re)insertion, but afterwards, it will always not work. It might create /dev/sdd, but this won't work as memory card needs /dev/sdd1 to be properly mounted. DMESG shows that card is detected with correct capacity, but correct device name is not created in second+ insertion. This is true whether I properly unmount the card or not. Currently, I run Debian Sarge. Interestingly, when I used to run Ubuntu Hoary, I had the same problem. Only way to fix the problem was init.d/hotplug restart, which will almost always allow me to mount the sd card. I tried this under Sarge, and this seems to hang hotplug (thus my mouse as well). Thanks. Some dmesg messages: usb 5-3.4: new high speed USB device using address 6 scsi1 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: STORAGE DEVICE Rev: 0119 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 1984000 512-byte hdwr sectors (1016 MB) sda: assuming Write Enabled sda: assuming drive cache: write through /dev/scsi/host1/bus0/target0/lun0: p1 Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Vendor: Generic Model: STORAGE DEVICE Rev: 0119 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 1 Vendor: Generic Model: STORAGE DEVICE Rev: 0119 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdc: 1984000 512-byte hdwr sectors (1016 MB) --More-- Vendor: Generic Model: STORAGE DEVICE Rev: 0119 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdc: 1984000 512-byte hdwr sectors (1016 MB) sdc: assuming Write Enabled sdc: assuming drive cache: write through /dev/scsi/host1/bus0/target0/lun2: p1 Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun 2 Vendor: Generic Model: STORAGE DEVICE Rev: 0119 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 3 USB Mass Storage device found at 6 -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-k7 Locale: LANG=ko_KR.UTF-8, LC_CTYPE=ko_KR.UTF-8 (charmap=UTF-8) Versions of packages hotplug depends on: ii bash 2.05b-26 The GNU Bourne Again SHell ii debconf 1.4.30.13 Debian configuration management sy ii grep 2.5.1.ds1-4 GNU grep, egrep and fgrep ii module-init-tools 3.2-pre1-2 tools for managing Linux kernel mo ii modutils 2.4.26-1.2 Linux module utilities ii procps 1:3.2.1-2 The /proc file system utilities ii sed 4.1.2-8 The GNU sed stream editor -- debconf information: hotplug/ignore_pci_class_display: true hotplug/net_agent_policy: hotplug hotplug/static_module_list: hotplug/x11_usbmice_hack: false & __________________________________ Yahoo! Mail Mobile Take Yahoo! Mail with you! Check email on your mobile phone. http://mobile.yahoo.com/learn/mail -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]