Package: asterisk Version: 1:1.4.18.1~dfsg-1 Severity: important With a junghanns.net QuadBRI card, calls to a phone connected to an NT mode port timeout nearly immediately, whatever the value (if any) in the Dial() command. The phones ring once, and that's it. If I catch the call during the short window of opportunity, the calls works fine.
I didn't have this problem with Asterisk 1.2 from etch, but I have it since I upgraded to Asterisk 1.4 from sid. Calls to a phone connected to an NT mode port work correctly. Tried different phones, connecting only one phone to the port, putting an explicit timeout in the Dial command, putting no timeout there, ... The asterisk verbose output says: -- Channel 0/1, span 2 got hangup, cause 18 The bri debug says: 2 -- Making new call for cr 136 2 > Protocol Discriminator: Q.931 (8) len=55 2 > Call Ref: len= 1 (reference 8/0x8) (Originator) 2 > Message type: SETUP (5) 2 > [04 03 80 90 a3] 2 > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) 2 > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) 2 > Ext: 1 User information layer 1: A-Law (35) 2 > [18 01 89] 2 > Channel ID (len= 3) [ Ext: 1 IntID: Implicit Other Spare: 0 Exclusive Dchan: 0 2 > ChanSel: B1 channel 2 ] 2 > [28 12 4c 69 6f 6e 65 6c 20 45 6c 69 65 20 4d 61 6d 61 6e 65] 2 > Display (len=18) [ Lionel Elie Mamane ] 2 > [6c 09 11 80 30 6d 61 73 74 65 72] 2 > Calling Number (len=11) [ Ext: 0 TON: International Number (1) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) 2 > Presentation: Presentation permitted, user number not screened (0) '0master' ] 2 > [70 05 c1 31 30 30 31] 2 > Called Number (len= 7) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '1001' ] 2 > [a1] 2 > Sending Complete (len= 1) 2 > [7d 02 91 81] 2 > High-layer compatibilty (len= 4) [ 2 0x91 2 0x81 2 ] 2 q931.c:3637 q931_setup: call 136 on channel 1 enters state 1 (Call Initiated) 2 -- Got SABME from cpe peer. 2 Sending Unnumbered Acknowledgement 2 -- Restarting T203 counter 2 -- Got SABME from cpe peer. 2 Sending Unnumbered Acknowledgement 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 < Protocol Discriminator: Q.931 (8) len=4 2 < Call Ref: len= 1 (reference 136/0x88) (Terminator) 2 < Message type: ALERTING (1) 2 q931.c:4277 q931_receive: call 136 on channel 1 enters state 4 (Call Delivered) 2 -- Making new q921 call for cref 136 tei 68 2 -- Restarting T203 counter 2 -- Got SABME from cpe peer. 2 Sending Unnumbered Acknowledgement 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 < Protocol Discriminator: Q.931 (8) len=4 2 < Call Ref: len= 1 (reference 136/0x88) (Terminator) 2 < Message type: ALERTING (1) 2 -- Making new q921 call for cref 136 tei 64 2 -- Restarting T203 counter 2 -- Got SABME from cpe peer. 2 Sending Unnumbered Acknowledgement 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 < Protocol Discriminator: Q.931 (8) len=8 2 < Call Ref: len= 1 (reference 136/0x88) (Terminator) 2 < Message type: RELEASE COMPLETE (90) 2 < [08 02 80 92] 2 < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) 2 < Ext: 1 Cause: No user responding (18), class = Normal Event (1) ] 2 -- Processing IE 8 (cs0, Cause) 2 -- Restarting T203 counter 2 No response to SETUP message 2 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Delivered, peerstate Call Received 2 sending RELEASE for TEI 64 2 -- Restarting T203 counter 2 > Protocol Discriminator: Q.931 (8) len=8 2 > Call Ref: len= 1 (reference 8/0x8) (Originator) 2 > Message type: RELEASE (77) 2 > [08 02 80 90] 2 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) 2 > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] 2 sending RELEASE for TEI 68 2 -- Restarting T203 counter 2 > Protocol Discriminator: Q.931 (8) len=8 2 > Call Ref: len= 1 (reference 8/0x8) (Originator) 2 > Message type: RELEASE (77) 2 > [08 02 80 90] 2 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) 2 > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] 2 NEW_HANGUP DEBUG: Destroying the call, ourstate Call Delivered, peerstate Call Received 2 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Delivered, peerstate Call Received 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 < Protocol Discriminator: Q.931 (8) len=4 2 < Call Ref: len= 1 (reference 136/0x88) (Terminator) 2 < Message type: RELEASE COMPLETE (90) 2 -- Making new call for cr 136 2 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null 2 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 < Protocol Discriminator: Q.931 (8) len=4 2 < Call Ref: len= 1 (reference 136/0x88) (Terminator) 2 < Message type: RELEASE COMPLETE (90) 2 -- Making new call for cr 136 2 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null 2 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 -- Got Disconnect from peer. 2 Sending Unnumbered Acknowledgement 2 -- Restarting T203 counter 2 Stopping T_203 timer for TEI 68 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 -- Restarting T203 counter 2 -- Got Disconnect from peer. 2 Sending Unnumbered Acknowledgement 2 -- Restarting T203 counter 2 Stopping T_203 timer for TEI 69 2 -- Got Disconnect from peer. 2 Sending Unnumbered Acknowledgement 2 -- Restarting T203 counter 2 Stopping T_203 timer for TEI 65 2 -- Got Disconnect from peer. 2 Sending Unnumbered Acknowledgement 2 -- Restarting T203 counter 2 Stopping T_203 timer for TEI 64 -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (600, 'stable'), (300, 'testing'), (200, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-6-686 Locale: LANG=fr_LU.UTF-8, LC_CTYPE=fr_LU.UTF-8 (charmap=UTF-8) Versions of packages asterisk depends on: ii adduser 3.102 Add and remove users and groups ii asterisk-config 1:1.4.18.1~dfsg-1 Configuration files for Asterisk ii asterisk-sounds-main 1:1.4.18.1~dfsg-1 Core Sound files for Asterisk (Eng ii libasound2 1.0.16-2 ALSA library ii libc-client2007 7:2007~dfsg-1 UW c-client library for mail proto ii libc6 2.7-10 GNU C Library: Shared libraries ii libcap1 1:1.10-14 support for getting/setting POSIX. ii libct3 0.63-3.2 libraries for connecting to MS SQL ii libcurl3 7.18.0-1 Multi-protocol file transfer libra ii libgcc1 1:4.1.1-21 GCC support library ii libgsm1 1.0.12-1 Shared libraries for GSM speech co ii libiksemel3 1.2-3 C library for the Jabber IM platfo ii libkrb53 1.6.dfsg.3~beta1-4 MIT Kerberos runtime libraries ii libncurses5 5.6+20080203-1 Shared libraries for terminal hand ii libnewt0.52 0.52.2-10 Not Erik's Windowing Toolkit - tex ii libogg0 1.1.3-2 Ogg Bitstream Library ii libpopt0 1.10-3 lib for parsing cmdline parameters ii libpq5 8.3.1-1 PostgreSQL C client library ii libpri1.0 1.4.2-1 Primary Rate ISDN specification li ii libradiusclient-ng2 0.5.3-2 Enhanced RADIUS client library ii libsnmp15 5.4.1~dfsg-6 SNMP (Simple Network Management Pr ii libspeex1 1.1.12-3 The Speex Speech Codec ii libsqlite0 2.8.17-2 SQLite shared library ii libssl0.9.8 0.9.8g-8 SSL shared libraries ii libstdc++6 4.1.1-21 The GNU Standard C++ Library v3 ii libtonezone1 1:1.4.9.2~dfsg-1 tonezone library (runtime) ii libvorbis0a 1.1.2.dfsg-1.3 The Vorbis General Audio Compressi ii libvorbisenc2 1.1.2.dfsg-1.3 The Vorbis General Audio Compressi ii libvpb0 4.2.26-1 Voicetronix telephony hardware use ii unixodbc 2.2.11-13 ODBC tools libraries ii zlib1g 1:1.2.3.3.dfsg-11 compression library - runtime asterisk recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]