Package: linux-image-2.6.24-1-amd64 Version: 2.6.24-5 Severity: critical Justification: breaks the whole USB-system
I bought a new PC with AMD Phenom CPU. I know that it's known for some bugs, but my MB BIOS has a Patch included to switch e.g. the TLB bug off. So I think it's something else. When I'm just mounting and using the disks, I almost have no problems. But I had to do a fsck once on one of my USB disks and it started, nothing happened. I watched with vmstat 1 if anything changes but there was nothing. At this time it wasn't possible anymore to reach the other partitions on that disk, mount etc. just hangs like the fsck. Even other USB devices would not be recognized, the whole USB system was dead at this time. Another strange effect: It was impossible to use lilo, it also just hangs, even though lilo just writes at the internal SATA disk. There were no messages in the log, nothing. I searched in the web and found someone with an ASUS board (mine is a Gigabyte) who said: use "nmi_watchdog=1" as boot option. It didn't change the hanging of the whole USB subsystem, but once I got those messages in my dmesg: APIC error on CPU1: 00(40) APIC error on CPU0: 00(40) APIC error on CPU2: 00(40) APIC error on CPU3: 00(40) I even tried an older kernel, 2.6.22: no difference. This really is a horrible bug for me, all of my USB disks seems to be unusable for me and I have almost all of my stuff on USB disks. The internal SATA disk is just for starting only. Without USB disks the whole system is unusable for me. Ah, the technical stuff: AMD Phenom 9600 4 GB RAM (800 MHz) Motherboard Gigabyte GA-MA790FX-DQ6 -- Package-specific info: ** Version: Linux version 2.6.24-1-amd64 (Debian 2.6.24-5) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27 19:16:18 UTC 2008 ** Command line: BOOT_IMAGE=AMD642624 rw root=801 ramdisk_size=100000 lang=de nomce noapictimer ** Not tainted ** Kernel log: PCI: Setting latency timer of device 0000:05:00.0 to 64 scsi6 : ahci scsi7 : ahci ata7: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfd7fe100 irq 18 ata8: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfd7fe180 irq 18 ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 1465147055 512-byte hardware sectors (750155 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 1465147055 512-byte hardware sectors (750155 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<4>Driver 'sr' needs updating - please use bus_type methods sda1 sda2 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] Probing IDE interface ide0... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... md: linear personality registered for level -1 md: multipath personality registered for level -4 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 xor: automatically using best checksumming function: generic_sse generic_sse: 9189.000 MB/sec xor: using function: generic_sse (9189.000 MB/sec) async_tx: api initialized (sync-only) raid6: int64x1 1661 MB/s raid6: int64x2 2341 MB/s raid6: int64x4 2655 MB/s raid6: int64x8 1635 MB/s raid6: sse2x1 3156 MB/s raid6: sse2x2 5512 MB/s raid6: sse2x4 6599 MB/s raid6: using algorithm sse2x4 (6599 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: raid10 personality registered for level 10 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. udev: renamed network interface eth0 to eth3 udev: renamed network interface eth1 to eth4 input: PC Speaker as /class/input/input2 input: Power Button (FF) as /class/input/input3 piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... input: ImExPS/2 Generic Explorer Mouse as /class/input/input5 Adding 1983988k swap on /dev/sda8. Priority:-1 extents:1 across:1983988k device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: table: 254:0: multipath: error getting device device-mapper: ioctl: error adding target to table ttyS0: LSR safety check engaged! ttyS0: LSR safety check engaged! ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! fuse init (API version 7.9) NET: Registered protocol family 10 lo: Disabled Privacy Extensions EFS: 1.0a - http://aeschi.ch.eu.org/efs/ NET: Registered protocol family 15 r8169: int1000: link up r8169: int1000: link up capifs: Rev 1.1.2.3 pnp: the driver 'parport_pc' has been registered lp: driver loaded but no devices found ppdev: user-space parallel port driver NET: Registered protocol family 4 device-mapper: table: 254:0: multipath: error getting device device-mapper: ioctl: error adding target to table tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]> ttyS0: LSR safety check engaged! ttyS1: LSR safety check engaged! nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team int1000: no IPv6 routers present r8169: ext100: link up r8169: ext100: link up PPP generic driver version 2.4.2 NET: Registered protocol family 24 ext100: no IPv6 routers present ** Loaded modules: Module Size Used by pppoe 19200 2 pppox 8728 1 pppoe ppp_generic 33568 6 pppoe,pppox slhc 10752 1 ppp_generic ipt_LOG 10880 1 xt_limit 7680 2 ipt_REJECT 9216 1 ipt_MASQUERADE 8448 1 xt_tcpudp 7936 10 xt_state 7040 1 iptable_nat 12036 1 nf_nat 25644 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 24208 3 iptable_nat iptable_filter 7680 1 ip_tables 25576 2 iptable_nat,iptable_filter x_tables 24712 8 ipt_LOG,xt_limit,ipt_REJECT,ipt_MASQUERADE,xt_tcpudp,xt_state,iptable_nat,ip_tables nf_conntrack_irc 12192 0 nf_conntrack_ftp 14504 0 nf_conntrack 77936 7 ipt_MASQUERADE,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4,nf_conntrack_irc,nf_conntrack_ftp binfmt_misc 17292 1 tun 16512 0 p8023 6656 1 ipx capifs 10896 1 deflate 8448 0 zlib_deflate 24088 1 deflate zlib_inflate 19328 1 deflate twofish 11392 0 twofish_common 42240 1 twofish camellia 34432 0 serpent 23040 0 blowfish 13184 0 des_generic 21376 0 cbc 9088 0 ecb 8192 0 blkcipher 11780 2 cbc,ecb aes_generic 31040 0 aes_x86_64 29992 0 xcbc 10248 0 sha256_generic 13312 0 sha1_generic 7296 0 crypto_null 7296 0 af_key 42388 0 efs 17928 0 ipv6 286248 28 analog 15328 0 gameport 20496 1 analog mii 10240 0 fuse 53680 1 dm_crypt 18568 0 dm_round_robin 7936 0 dm_multipath 24336 1 dm_round_robin snd_hda_intel 362024 1 snd_pcm_oss 46624 0 snd_mixer_oss 21376 2 snd_pcm_oss snd_pcm 89352 2 snd_hda_intel,snd_pcm_oss snd_timer 28552 1 snd_pcm snd 65896 5 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer serio_raw 11908 0 soundcore 13216 2 snd button 13984 0 snd_page_alloc 15248 2 snd_hda_intel,snd_pcm psmouse 45724 0 evdev 17024 5 pcspkr 7808 0 ext3 139024 1 jbd 55976 1 ext3 mbcache 13952 1 ext3 dm_snapshot 21960 0 async_xor 7424 1 raid456 async_memcpy 6528 1 raid456 async_tx 7168 1 raid456 xor 10128 2 raid456,async_xor multipath 13440 0 linear 10112 0 md_mod 84380 6 raid10,raid456,raid1,raid0,multipath,linear ide_generic 5632 0 [permanent] dm_mirror 27008 0 dm_mod 67832 4 dm_crypt,dm_multipath,dm_snapshot,dm_mirror sg 41752 0 sr_mod 22820 0 cdrom 39464 1 sr_mod sd_mod 33536 3 atiixp 9488 0 [permanent] ohci_hcd 28164 0 ahci 34436 2 ehci_hcd 39692 0 jmicron 7168 0 [permanent] generic 9732 0 [permanent] ide_core 144920 4 ide_generic,atiixp,jmicron,generic ata_generic 13060 0 libata 162736 2 ahci,ata_generic scsi_mod 170296 4 sg,sr_mod,sd_mod,libata r8169 36740 0 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Subsystem: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part [1002:5956] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:07.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D) [1002:597d] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:09.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E) [1002:597e] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fd700000-fd7fffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Unknown device [1458:b002] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Unknown device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Unknown device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Unknown device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Unknown device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Unknown device [1458:5004] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Unknown device [1458:5004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14) Subsystem: Giga-byte Technology Unknown device [1458:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 0b00 [size=16] Capabilities: <access denied> Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: Giga-byte Technology Unknown device [1458:5002] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f900 [size=16] Kernel driver in use: ATIIXP_IDE Kernel modules: atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383] Subsystem: Giga-byte Technology Unknown device [1458:a022] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Giga-byte Technology Unknown device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=06, subordinate=06, sec-latency=64 I/O behind bridge: 00009000-00009fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: fd500000-fd5fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV630 [Radeon HD 2600 Series] [1002:9589] (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Unknown device [1458:2180] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fdee0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at be00 [size=256] [virtual] Expansion ROM at fde00000 [disabled] [size=128K] Capabilities: <access denied> 01:00.1 Audio device [0403]: ATI Technologies Inc RV630 audio device [Radeon HD 2600 Series] [1002:aa08] Subsystem: Giga-byte Technology Unknown device [1458:aa08] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at fdefc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Giga-byte Technology Unknown device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1274 Region 0: I/O ports at ae00 [size=256] Region 2: Memory at fddff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdc00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Giga-byte Technology Unknown device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1273 Region 0: I/O ports at ee00 [size=256] Region 2: Memory at fdbff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fda00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Unknown device [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 17 Region 5: Memory at fd9fe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 04:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Unknown device [1458:b000] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at df00 [size=8] Region 1: I/O ports at de00 [size=4] Region 2: I/O ports at dd00 [size=8] Region 3: I/O ports at dc00 [size=4] Region 4: I/O ports at db00 [size=16] Capabilities: <access denied> Kernel driver in use: JMicron IDE Kernel modules: jmicron 05:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Unknown device [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 5: Memory at fd7fe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 05:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology Unknown device [1458:b000] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at cf00 [size=8] Region 1: I/O ports at ce00 [size=4] Region 2: I/O ports at cd00 [size=8] Region 3: I/O ports at cc00 [size=4] Region 4: I/O ports at cb00 [size=16] Capabilities: <access denied> Kernel driver in use: JMicron IDE Kernel modules: jmicron 06:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology Unknown device [1458:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fd6ff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fd6f8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable') Architecture: i386 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/4 CPU cores) Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy ii initramfs-tools [linux-initr 0.91e tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo linux-image-2.6.24-1-amd64 recommends no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]