On Fri, 2008-05-09 at 14:19 +0200, maximilian attems wrote: > hmm i have 2.6.25-rc1 + git4 running fine on my x61s you could test it > too -> http://photon.itp.tuwien.ac.at/~mattems/
Hello Maximilian, I did a couple more tests with both your 2.6.26-rc1 and vanilla 2.6.25.2. The latter is compiled using the .config from 2.6.25-1-amd64 from Debian. Additionally, I report the output in /var/log/messages from 2.6.24-1-amd64. Test metodology: 1) Boot the machine (Asus Z37E running Sid) 2) Start a media player (in my case Banshee) 3) Play a song 4) Pause the song 5) Close the lid to suspend 6) Resume 7) Press play again 2.6.24-1-amd64: sound comes back after the resume. May 9 23:58:04 vasquez gnome-power-manager: (jack) Suspending computer. Reason: The lid has been closed on battery power. May 9 23:58:08 vasquez kernel: sky2 eth1: disabling interface May 9 23:58:36 vasquez kernel: Syncing filesystems ... done. May 9 23:58:36 vasquez kernel: Freezing user space processes ... (elapsed 0.00 seconds) done. May 9 23:58:36 vasquez kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. May 9 23:58:36 vasquez kernel: Suspending console(s) May 9 23:58:36 vasquez kernel: sd 0:0:0:0: [sda] Stopping disk May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device 0000:06:01.1 disabled May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device 0000:02:00.0 disabled May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device 0000:00:1d.7 disabled May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device 0000:00:1d.2 disabled May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device 0000:00:1d.1 disabled May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device 0000:00:1d.0 disabled May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device 0000:00:1b.0 disabled May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device 0000:00:1a.7 disabled May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device 0000:00:1a.1 disabled May 9 23:58:36 vasquez kernel: ACPI: PCI interrupt for device 0000:00:1a.0 disabled May 9 23:58:36 vasquez kernel: Disabling non-boot CPUs ... May 9 23:58:36 vasquez kernel: CPU 1 is now offline May 9 23:58:36 vasquez kernel: SMP alternatives: switching to UP code May 9 23:58:36 vasquez kernel: CPU1 is down May 9 23:58:36 vasquez kernel: Enabling non-boot CPUs ... May 9 23:58:36 vasquez kernel: SMP alternatives: switching to SMP code May 9 23:58:36 vasquez kernel: Booting processor 1/2 APIC 0x1 May 9 23:58:36 vasquez kernel: Initializing CPU#1 May 9 23:58:36 vasquez kernel: Calibrating delay using timer specific routine.. 4388.84 BogoMIPS (lpj=8777699) May 9 23:58:36 vasquez kernel: CPU: L1 I cache: 32K, L1 D cache: 32K May 9 23:58:36 vasquez kernel: CPU: L2 cache: 4096K May 9 23:58:36 vasquez kernel: CPU 1/1 -> Node 0 May 9 23:58:36 vasquez kernel: CPU: Physical Processor ID: 0 May 9 23:58:36 vasquez kernel: CPU: Processor Core ID: 1 May 9 23:58:36 vasquez kernel: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a May 9 23:58:36 vasquez kernel: CPU1 is up May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 May 9 23:58:36 vasquez kernel: usb usb1: root hub lost power or was reset May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 May 9 23:58:36 vasquez kernel: usb usb2: root hub lost power or was reset May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 May 9 23:58:36 vasquez kernel: usb usb3: root hub lost power or was reset May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 May 9 23:58:36 vasquez kernel: usb usb4: root hub lost power or was reset May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 May 9 23:58:36 vasquez kernel: usb usb5: root hub lost power or was reset May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 May 9 23:58:36 vasquez kernel: Coming out of suspend... May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 May 9 23:58:36 vasquez kernel: ata2: SATA link down (SStatus 0 SControl 300) May 9 23:58:36 vasquez kernel: ata3: SATA link down (SStatus 0 SControl 300) May 9 23:58:36 vasquez kernel: ACPI: PCI Interrupt 0000:06:01.1[B] -> GSI 17 (level, low) -> IRQ 17 May 9 23:58:36 vasquez kernel: ata4: SATA link down (SStatus 0 SControl 300) May 9 23:58:36 vasquez kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 9 23:58:36 vasquez kernel: ata1.00: configured for UDMA/100 May 9 23:58:36 vasquez kernel: sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) May 9 23:58:36 vasquez kernel: sd 0:0:0:0: [sda] Write Protect is off May 9 23:58:36 vasquez kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 9 23:58:36 vasquez kernel: sd 0:0:0:0: [sda] Starting disk May 9 23:58:36 vasquez kernel: hda: UDMA/33 mode selected May 9 23:58:36 vasquez kernel: Restarting tasks ... <6>usb 1-1: USB disconnect, address 3 May 9 23:58:36 vasquez kernel: done. May 9 23:58:36 vasquez gnome-power-manager: (jack) Resuming computer May 9 23:58:36 vasquez kernel: usb 5-1: USB disconnect, address 3 May 9 23:58:37 vasquez kernel: usb 5-1: new full speed USB device using uhci_hcd and address 4 May 9 23:58:37 vasquez kernel: usb 5-1: configuration #1 chosen from 1 choice May 9 23:58:37 vasquez kernel: usb 7-6: USB disconnect, address 3 May 9 23:58:38 vasquez kernel: usb 7-6: new high speed USB device using ehci_hcd and address 4 May 9 23:58:38 vasquez kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready May 9 23:58:38 vasquez kernel: sky2 eth1: enabling interface May 9 23:58:38 vasquez kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready May 9 23:58:38 vasquez kernel: usb 7-6: configuration #1 chosen from 1 choice May 9 23:58:38 vasquez kernel: usb 1-1: new full speed USB device using uhci_hcd and address 4 May 9 23:58:38 vasquez kernel: usb 1-1: configuration #1 chosen from 1 choice 2.6.25.2: No sound after resume. May 10 00:08:33 vasquez gnome-power-manager: (jack) Suspending computer. Reason: The lid has been closed on battery power. May 10 00:08:38 vasquez kernel: [ 114.683194] ACPI: PCI interrupt for device 0000:03:00.0 disabled May 10 00:08:57 vasquez kernel: [ 114.693236] PM: Syncing filesystems ... done. May 10 00:08:57 vasquez kernel: [ 114.694303] Freezing user space processes ... <6>sky2 eth1: disabling interface May 10 00:08:57 vasquez kernel: [ 114.708135] (elapsed 0.01 seconds) done. May 10 00:08:57 vasquez kernel: [ 114.708141] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. May 10 00:08:57 vasquez kernel: [ 114.708224] Suspending console(s) May 10 00:08:57 vasquez kernel: [ 114.708729] ACPI: PCI interrupt for device 0000:00:02.0 disabled May 10 00:08:57 vasquez kernel: [ 114.773747] sd 0:0:0:0: [sda] Synchronizing SCSI cache May 10 00:08:57 vasquez kernel: [ 114.854698] sd 0:0:0:0: [sda] Stopping disk May 10 00:08:57 vasquez kernel: [ 118.424057] ricoh-mmc: Suspending. May 10 00:08:57 vasquez kernel: [ 118.424078] ricoh-mmc: Controller is now re-enabled. May 10 00:08:57 vasquez kernel: [ 118.424145] ACPI: PCI interrupt for device 0000:06:01.1 disabled May 10 00:08:57 vasquez kernel: [ 118.494410] ACPI: PCI interrupt for device 0000:02:00.0 disabled May 10 00:08:57 vasquez kernel: [ 118.589578] ACPI: PCI interrupt for device 0000:00:1f.1 disabled May 10 00:08:57 vasquez kernel: [ 118.589700] ACPI: PCI interrupt for device 0000:00:1d.7 disabled May 10 00:08:57 vasquez kernel: [ 118.608346] ACPI: PCI interrupt for device 0000:00:1d.2 disabled May 10 00:08:57 vasquez kernel: [ 118.608379] ACPI: PCI interrupt for device 0000:00:1d.1 disabled May 10 00:08:57 vasquez kernel: [ 118.608411] ACPI: PCI interrupt for device 0000:00:1d.0 disabled May 10 00:08:57 vasquez kernel: [ 118.640233] ACPI: PCI interrupt for device 0000:00:1b.0 disabled May 10 00:08:57 vasquez kernel: [ 118.656209] ACPI: PCI interrupt for device 0000:00:1a.7 disabled May 10 00:08:57 vasquez kernel: [ 118.672164] ACPI: PCI interrupt for device 0000:00:1a.1 disabled May 10 00:08:57 vasquez kernel: [ 118.672197] ACPI: PCI interrupt for device 0000:00:1a.0 disabled May 10 00:08:57 vasquez kernel: [ 118.676111] ACPI: Preparing to enter system sleep state S3 May 10 00:08:57 vasquez kernel: [ 118.678263] Disabling non-boot CPUs ... May 10 00:08:57 vasquez kernel: [ 116.342593] CPU 1 is now offline May 10 00:08:57 vasquez kernel: [ 116.342597] SMP alternatives: switching to UP code May 10 00:08:57 vasquez kernel: [ 116.344740] CPU1 is down May 10 00:08:57 vasquez kernel: [ 116.345083] Enabling non-boot CPUs ... May 10 00:08:57 vasquez kernel: [ 116.354737] SMP alternatives: switching to SMP code May 10 00:08:57 vasquez kernel: [ 116.356121] Booting processor 1/2 APIC 0x1 May 10 00:08:57 vasquez kernel: [ 118.690543] Initializing CPU#1 May 10 00:08:57 vasquez kernel: [ 118.692089] Calibrating delay using timer specific routine.. 4389.11 BogoMIPS (lpj=8778236) May 10 00:08:57 vasquez kernel: [ 118.692089] CPU: L1 I cache: 32K, L1 D cache: 32K May 10 00:08:57 vasquez kernel: [ 118.692089] CPU: L2 cache: 4096K May 10 00:08:57 vasquez kernel: [ 118.692089] CPU 1/1 -> Node 0 May 10 00:08:57 vasquez kernel: [ 118.692089] CPU: Physical Processor ID: 0 May 10 00:08:57 vasquez kernel: [ 118.692089] CPU: Processor Core ID: 1 May 10 00:08:57 vasquez kernel: [ 118.692089] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a May 10 00:08:57 vasquez kernel: [ 118.692089] CPU1 is up May 10 00:08:57 vasquez kernel: [ 118.756335] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 May 10 00:08:57 vasquez kernel: [ 118.756391] usb usb1: root hub lost power or was reset May 10 00:08:57 vasquez kernel: [ 118.756413] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 May 10 00:08:57 vasquez kernel: [ 118.756468] usb usb2: root hub lost power or was reset May 10 00:08:57 vasquez kernel: [ 118.771323] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 May 10 00:08:57 vasquez kernel: [ 118.787275] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 May 10 00:08:57 vasquez kernel: [ 118.890048] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 May 10 00:08:57 vasquez kernel: [ 118.890119] usb usb3: root hub lost power or was reset May 10 00:08:57 vasquez kernel: [ 118.890141] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 May 10 00:08:57 vasquez kernel: [ 118.890212] usb usb4: root hub lost power or was reset May 10 00:08:57 vasquez kernel: [ 118.890234] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 May 10 00:08:57 vasquez kernel: [ 118.890307] usb usb5: root hub lost power or was reset May 10 00:08:57 vasquez kernel: [ 118.904675] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 May 10 00:08:57 vasquez kernel: [ 118.904861] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error (dsopcode-0483): Attempt to CreateField of length zero [20070126] May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81007f360630), AE_AML_OPERAND_VALUE May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node ffff81007f360850), AE_AML_OPERAND_VALUE May 10 00:08:57 vasquez kernel: [ 116.657725] ata6.00: _GTF evaluation failed (AE 0x3006) May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error (dsopcode-0483): Attempt to CreateField of length zero [20070126] May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81007f360630), AE_AML_OPERAND_VALUE May 10 00:08:57 vasquez kernel: [ 116.657725] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV1._GTF] (Node ffff81007f3607f0), AE_AML_OPERAND_VALUE May 10 00:08:57 vasquez kernel: [ 116.657725] ata6.01: _GTF evaluation failed (AE 0x3006) May 10 00:08:57 vasquez kernel: [ 116.659530] ACPI Error (dsopcode-0483): Attempt to CreateField of length zero [20070126] May 10 00:08:57 vasquez kernel: [ 116.659537] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node ffff81007f360630), AE_AML_OPERAND_VALUE May 10 00:08:57 vasquez kernel: [ 116.659588] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV1._GTF] (Node ffff81007f360930), AE_AML_OPERAND_VALUE May 10 00:08:57 vasquez kernel: [ 116.659639] ata5.01: _GTF evaluation failed (AE 0x3006) May 10 00:08:57 vasquez kernel: [ 116.977678] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out May 10 00:08:57 vasquez kernel: [ 116.977683] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out May 10 00:08:57 vasquez kernel: [ 117.149302] ata5.00: configured for UDMA/33 May 10 00:08:57 vasquez kernel: [ 119.958036] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 May 10 00:08:57 vasquez kernel: [ 117.983176] ata2: SATA link down (SStatus 0 SControl 300) May 10 00:08:57 vasquez kernel: [ 117.983191] ata3: SATA link down (SStatus 0 SControl 300) May 10 00:08:57 vasquez kernel: [ 121.087307] ACPI: PCI Interrupt 0000:06:01.1[B] -> GSI 17 (level, low) -> IRQ 17 May 10 00:08:57 vasquez kernel: [ 121.087327] ricoh-mmc: Resuming. May 10 00:08:57 vasquez kernel: [ 121.087336] ricoh-mmc: Controller is now disabled. May 10 00:08:57 vasquez kernel: [ 119.020945] ata4: SATA link down (SStatus 0 SControl 300) May 10 00:08:57 vasquez kernel: [ 119.360606] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 10 00:08:57 vasquez kernel: [ 119.406146] ata1.00: configured for UDMA/100 May 10 00:08:57 vasquez kernel: [ 119.421488] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) May 10 00:08:57 vasquez kernel: [ 119.421509] sd 0:0:0:0: [sda] Write Protect is off May 10 00:08:57 vasquez kernel: [ 119.421544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 10 00:08:57 vasquez kernel: [ 120.150874] sd 0:0:0:0: [sda] Starting disk May 10 00:08:57 vasquez kernel: [ 120.190856] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 May 10 00:08:57 vasquez kernel: [ 120.192385] Restarting tasks ... <6>usb 1-1: USB disconnect, address 3 May 10 00:08:57 vasquez kernel: [ 120.198546] done. May 10 00:08:57 vasquez kernel: [ 120.322890] usb 5-1: USB disconnect, address 4 May 10 00:08:58 vasquez kernel: [ 122.937201] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 May 10 00:08:58 vasquez kernel: [ 120.794857] usb 5-1: new full speed USB device using uhci_hcd and address 5 May 10 00:08:58 vasquez kernel: [ 123.151640] ADDRCONF(NETDEV_UP): wlan0: link is not ready May 10 00:08:58 vasquez kernel: [ 123.165557] sky2 eth1: enabling interface May 10 00:08:58 vasquez kernel: [ 123.169193] ADDRCONF(NETDEV_UP): eth1: link is not ready May 10 00:08:58 vasquez kernel: [ 121.039190] usb 5-1: configuration #1 chosen from 1 choice May 10 00:08:58 vasquez kernel: [ 121.053440] usb 5-1: New USB device found, idVendor=0b05, idProduct=1712 May 10 00:08:58 vasquez kernel: [ 121.053449] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3 May 10 00:08:58 vasquez kernel: [ 121.053452] usb 5-1: SerialNumber: 0194E8-5B-0002 May 10 00:08:58 vasquez kernel: [ 121.178890] usb 7-6: USB disconnect, address 3 May 10 00:08:58 vasquez kernel: [ 121.290894] usb 7-6: new high speed USB device using ehci_hcd and address 4 May 10 00:08:58 vasquez kernel: [ 121.444660] usb 7-6: configuration #1 chosen from 1 choice May 10 00:08:58 vasquez kernel: [ 121.445340] usb 7-6: New USB device found, idVendor=05e3, idProduct=0503 May 10 00:08:58 vasquez kernel: [ 121.445349] usb 7-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 May 10 00:08:58 vasquez kernel: [ 121.445353] usb 7-6: Product: USB 2.0 PC Camera May 10 00:08:59 vasquez kernel: [ 121.923572] usb 1-1: new full speed USB device using uhci_hcd and address 4 May 10 00:08:59 vasquez kernel: [ 122.097351] usb 1-1: configuration #1 chosen from 1 choice May 10 00:08:59 vasquez kernel: [ 122.098230] usb 1-1: New USB device found, idVendor=147e, idProduct=2016 May 10 00:08:59 vasquez kernel: [ 122.098230] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 10 00:08:59 vasquez kernel: [ 122.098230] usb 1-1: Product: Fingerprint Sensor May 10 00:08:59 vasquez kernel: [ 122.098230] usb 1-1: Manufacturer: TouchStrip May 10 00:09:00 vasquez gnome-power-manager: (jack) Resuming computer 2.6.26-rc1: No sound after resume. May 10 00:03:54 vasquez gnome-power-manager: (jack) Suspending computer. Reason: The lid has been closed on battery power. May 10 00:03:59 vasquez kernel: [17180810.540119] ACPI: PCI interrupt for device 0000:03:00.0 disabled May 10 00:03:59 vasquez kernel: [17180810.566171] sky2 eth1: disabling interface May 10 00:04:26 vasquez kernel: [17180811.311417] PM: Syncing filesystems ... done. May 10 00:04:26 vasquez kernel: [17180812.886830] Freezing user space processes ... (elapsed 0.00 seconds) done. May 10 00:04:26 vasquez kernel: [17180812.890656] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. May 10 00:04:26 vasquez kernel: [17180812.890656] Suspending console(s) May 10 00:04:26 vasquez kernel: [17180812.890656] ACPI: PCI interrupt for device 0000:00:02.0 disabled May 10 00:04:26 vasquez kernel: [17180812.906722] sd 0:0:0:0: [sda] Synchronizing SCSI cache May 10 00:04:26 vasquez kernel: [17180813.187890] sd 0:0:0:0: [sda] Stopping disk May 10 00:04:26 vasquez kernel: [17180814.523805] ricoh-mmc: Suspending. May 10 00:04:26 vasquez kernel: [17180814.523825] ricoh-mmc: Controller is now re-enabled. May 10 00:04:26 vasquez kernel: [17180814.524927] ACPI: PCI interrupt for device 0000:06:01.1 disabled May 10 00:04:26 vasquez kernel: [17180814.598986] ACPI: PCI interrupt for device 0000:02:00.0 disabled May 10 00:04:26 vasquez kernel: [17180814.695693] ACPI: PCI interrupt for device 0000:00:1d.7 disabled May 10 00:04:26 vasquez kernel: [17180814.711569] ACPI: PCI interrupt for device 0000:00:1d.2 disabled May 10 00:04:26 vasquez kernel: [17180814.711602] ACPI: PCI interrupt for device 0000:00:1d.1 disabled May 10 00:04:26 vasquez kernel: [17180814.711635] ACPI: PCI interrupt for device 0000:00:1d.0 disabled May 10 00:04:26 vasquez kernel: [17180814.743421] ACPI: PCI interrupt for device 0000:00:1b.0 disabled May 10 00:04:26 vasquez kernel: [17180814.759434] ACPI: PCI interrupt for device 0000:00:1a.7 disabled May 10 00:04:26 vasquez kernel: [17180814.775399] ACPI: PCI interrupt for device 0000:00:1a.1 disabled May 10 00:04:26 vasquez kernel: [17180814.775432] ACPI: PCI interrupt for device 0000:00:1a.0 disabled May 10 00:04:26 vasquez kernel: [17180814.776005] ACPI: Preparing to enter system sleep state S3 May 10 00:04:26 vasquez kernel: [17180814.776884] Disabling non-boot CPUs ... May 10 00:04:26 vasquez kernel: [17180814.892086] CPU 1 is now offline May 10 00:04:26 vasquez kernel: [17180814.892090] SMP alternatives: switching to UP code May 10 00:04:26 vasquez kernel: [17180814.902131] CPU1 is down May 10 00:04:26 vasquez kernel: [17180814.902131] x86: PAT support disabled. May 10 00:04:26 vasquez kernel: [17180814.902890] Enabling non-boot CPUs ... May 10 00:04:26 vasquez kernel: [17180814.912805] SMP alternatives: switching to SMP code May 10 00:04:26 vasquez kernel: [17180814.923272] Booting processor 1/1 ip 6000 May 10 00:04:26 vasquez kernel: [17180814.932609] Initializing CPU#1 May 10 00:04:26 vasquez kernel: [17180814.932609] Calibrating delay using timer specific routine.. 4389.10 BogoMIPS (lpj=8778207) May 10 00:04:26 vasquez kernel: [17180814.932609] CPU: L1 I cache: 32K, L1 D cache: 32K May 10 00:04:26 vasquez kernel: [17180814.932609] CPU: L2 cache: 4096K May 10 00:04:26 vasquez kernel: [17180814.932609] CPU 1/1 -> Node 0 May 10 00:04:26 vasquez kernel: [17180814.932609] CPU: Physical Processor ID: 0 May 10 00:04:26 vasquez kernel: [17180814.932609] CPU: Processor Core ID: 1 May 10 00:04:26 vasquez kernel: [17180814.932609] x86: PAT support disabled. May 10 00:04:26 vasquez kernel: [17180815.014036] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a May 10 00:04:26 vasquez kernel: [17180814.932610] CPU1 is up May 10 00:04:26 vasquez kernel: [17180815.067294] ACPI: EC: non-query interrupt received, switching to interrupt mode May 10 00:04:26 vasquez kernel: [17180815.176812] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 May 10 00:04:26 vasquez kernel: [17180815.176868] usb usb1: root hub lost power or was reset May 10 00:04:26 vasquez kernel: [17180815.176890] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 May 10 00:04:26 vasquez kernel: [17180815.176946] usb usb2: root hub lost power or was reset May 10 00:04:26 vasquez kernel: [17180815.194665] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 May 10 00:04:26 vasquez kernel: [17180815.210666] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 May 10 00:04:26 vasquez kernel: [17180815.307150] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 May 10 00:04:26 vasquez kernel: [17180815.307220] usb usb3: root hub lost power or was reset May 10 00:04:26 vasquez kernel: [17180815.307241] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 May 10 00:04:26 vasquez kernel: [17180815.307306] usb usb4: root hub lost power or was reset May 10 00:04:26 vasquez kernel: [17180815.307327] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 May 10 00:04:26 vasquez kernel: [17180815.307392] usb usb5: root hub lost power or was reset May 10 00:04:26 vasquez kernel: [17180815.321853] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 May 10 00:04:26 vasquez kernel: [17180815.322028] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 May 10 00:04:26 vasquez kernel: [17180816.375364] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 May 10 00:04:26 vasquez kernel: [17180816.663085] ata3: SATA link down (SStatus 0 SControl 300) May 10 00:04:26 vasquez kernel: [17180816.663113] ata2: SATA link down (SStatus 0 SControl 300) May 10 00:04:26 vasquez kernel: [17180817.510084] ACPI: PCI Interrupt 0000:06:01.1[B] -> GSI 17 (level, low) -> IRQ 17 May 10 00:04:26 vasquez kernel: [17180817.511104] ricoh-mmc: Resuming. May 10 00:04:26 vasquez kernel: [17180817.511114] ricoh-mmc: Controller is now disabled. May 10 00:04:26 vasquez kernel: [17180817.703842] ata4: SATA link down (SStatus 0 SControl 300) May 10 00:04:26 vasquez kernel: [17180818.012259] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 10 00:04:26 vasquez kernel: [17180818.025933] ata1.00: configured for UDMA/100 May 10 00:04:26 vasquez kernel: [17180818.026008] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) May 10 00:04:26 vasquez kernel: [17180818.026031] sd 0:0:0:0: [sda] Write Protect is off May 10 00:04:26 vasquez kernel: [17180818.026069] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 10 00:04:26 vasquez kernel: [17180819.233925] usb 1-1: reset full speed USB device using uhci_hcd and address 3 May 10 00:04:26 vasquez kernel: [17180819.517932] usb 7-6: reset high speed USB device using ehci_hcd and address 3 May 10 00:04:26 vasquez kernel: [17180819.789929] usb 5-1: reset full speed USB device using uhci_hcd and address 3 May 10 00:04:26 vasquez kernel: [17180820.011132] hci_usb 5-1:1.0: no reset_resume for driver hci_usb? May 10 00:04:26 vasquez kernel: [17180820.011136] hci_usb 5-1:1.1: no reset_resume for driver hci_usb? May 10 00:04:26 vasquez kernel: [17180820.011149] sd 0:0:0:0: [sda] Starting disk May 10 00:04:26 vasquez kernel: [17180820.045841] hda: UDMA/33 mode selected May 10 00:04:26 vasquez kernel: [17180820.062296] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 May 10 00:04:26 vasquez kernel: [17180820.064265] Restarting tasks ... done. May 10 00:04:26 vasquez gnome-power-manager: (jack) Resuming computer May 10 00:04:26 vasquez kernel: [17180820.225064] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 May 10 00:04:27 vasquez kernel: [17180820.446423] Registered led device: iwl-phy0:radio May 10 00:04:27 vasquez kernel: [17180820.446488] Registered led device: iwl-phy0:assoc May 10 00:04:27 vasquez kernel: [17180820.446543] Registered led device: iwl-phy0:RX May 10 00:04:27 vasquez kernel: [17180820.446596] Registered led device: iwl-phy0:TX May 10 00:04:27 vasquez kernel: [17180820.485614] ADDRCONF(NETDEV_UP): wlan0: link is not ready May 10 00:04:27 vasquez kernel: [17180820.592371] sky2 eth1: enabling interface May 10 00:04:27 vasquez kernel: [17180820.595992] ADDRCONF(NETDEV_UP): eth1: link is not ready Sorry if the message is very long. I couldn't find any similar reports in bugzilla.kernel.org, if you have no more ideas I'll report it there too. Thanks! -- BOFH excuse #351: PEBKAC (Problem Exists Between Keyboard And Chair) -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: CONCORSO BEST WESTERN * Gioca e vinci! In palio ogni giorno buoni sconto da 50 per soggiorni in tutto il mondo ed estrazione finale di una Citroen C1 Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=7802&d=10-5 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
