Package: setserial Version: 2.17-40 Severity: normal Thu May 26 03:55:22 doh:~/led# cat /var/lib/setserial/autoserial.conf ###PORT STATE GENERATED USING AUTOSAVE-ONCE### ###AUTOSAVE-ONCE### # ###PORT STATE GENERATED USING AUTOSAVE-ONCE### ###AUTOSAVE-ONCE### ###AUTOSAVE-ONCE### ###AUTOSAVE### # # If you want to configure this file by hand, use # dpkg --configure setserial # and change the configuration mode of the file to MANUAL. If you do not do this# this file may be overwritten automatically the next time you upgrade the # package. # #/dev/ttyS0 uart 16550A port 0x03f8 irq 4 baud_base 115200 spd_normal skip_test #/dev/ttyS1 uart 16550A port 0x02f8 irq 3 baud_base 115200 spd_normal skip_test /dev/ttyS0 uart 8250 port 0x300 irq 4 baud_base 115200 spd_normal Thu May 26 03:55:42 doh:~/led# dpkg --configure setserial dpkg: error processing setserial (--configure): package setserial is already installed and configured Errors were encountered while processing: setserial Thu May 26 03:56:46 doh:~/led#
dpkg-reconfigure setserial works a treat. regards Mark -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.7-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages setserial depends on: ii debconf 1.4.49 Debian configuration management sy ii libc6 2.3.2.ds1-22 GNU C Library: Shared libraries an -- debconf information: setserial/rc-boot-file-removed: setserial/rc-boot-file-renamed: setserial/update-modules-failed: setserial/autosave: true * setserial/usemodup: true * setserial/autosave-types: autosave once -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]