Package: linux-image-2.6.24-1-686 Version: 2.6.24-6 Severity: normal
I just upgraded from etch to lenny in order to get at some new software, but now the CD/DVD drive doesn't work. There is a flood of errors on boot, including a couple of soft-lockup traces, all apparently having something to do with hdc (the cdrom). If I put a disc in the drive and try to mount it, the command hangs and I get more IDE errors and soft-lockup traces. (The mount command does eventually give up; it's not a permanent hang.) I've chopped the dmesg down to what appear to be the critical pieces, please let me know if you need more information. -- Package-specific info: ** Version: Linux version 2.6.24-1-686 (Debian 2.6.24-6) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Sat Apr 19 00:37:55 UTC 2008 ** Command line: auto BOOT_IMAGE=Linux ro root=301 ** Not tainted ** Kernel log: ATIIXP: IDE controller (0x1002:0x4349 rev 0x00) at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: WDC WD3200AAKB-00WHA0, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63 hda: cache flushes supported hda: hda1 hda2 hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: ATAPI CD-ROM drive, 0kB Cache Uniform CD-ROM driver Revision: 3.20 hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:659] Pid: 659, comm: modprobe Not tainted (2.6.24-1-686 #1) EIP: 0060:[<f8893dfb>] EFLAGS: 00000212 CPU: 0 EIP is at ide_inb+0x3/0x7 [ide_core] EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 00000177 ESI: f88a75f8 EDI: f88a75a0 EBP: fffeee00 ESP: f66cfb30 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b7e6f040 CR3: 365c0000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<f8894262>] __ide_wait_stat+0x91/0xee [ide_core] [<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core] [<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core] [<c01d34f9>] elv_queue_empty+0x1d/0x1e [<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core] [<c01d3686>] elv_drain_elevator+0x15/0x58 [<c01d3686>] elv_drain_elevator+0x15/0x58 [<c01d3f63>] elv_insert+0x107/0x1ea [<c01d3f63>] elv_insert+0x107/0x1ea [<c01d5c9a>] __blk_put_request+0x24/0x75 [<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core] [<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd] [<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd] [<c01f7560>] vgacon_scroll+0x182/0x19d [<f88ad498>] cdrom_read_capacity+0x57/0x85 [ide_cd] [<c01d5ea7>] blk_end_sync_rq+0x0/0x23 [<f88ae1d3>] cdrom_read_toc+0x94/0x3ff [ide_cd] [<f889a7bf>] __ide_add_setting+0xb6/0xd3 [ide_core] [<f889ab09>] ide_add_setting+0x48/0x4d [ide_core] [<f88aee58>] ide_cd_probe+0x91a/0x947 [ide_cd] [<c01884d0>] iput+0x39/0x62 [<c01b1783>] sysfs_addrm_finish+0x4a/0x194 [<c01b155b>] sysfs_add_one+0xaf/0xb8 [<c01b15b4>] sysfs_addrm_start+0x50/0x81 [<c01b20f3>] sysfs_create_link+0xb8/0xfd [<f8891054>] generic_ide_probe+0x1c/0x1d [ide_core] [<c0241820>] driver_probe_device+0xde/0x15c [<c02bb9e5>] klist_next+0x4b/0x6c [<c0241930>] __driver_attach+0x0/0x79 [<c0241976>] __driver_attach+0x46/0x79 [<c0240dfa>] bus_for_each_dev+0x37/0x59 [<c0241687>] driver_attach+0x16/0x18 [<c0241930>] __driver_attach+0x0/0x79 [<c02410e0>] bus_add_driver+0x6d/0x197 [<c0143721>] sys_init_module+0x15db/0x16f3 [<c016406e>] vma_prio_tree_insert+0x17/0x2a [<c012c7c0>] msleep+0x0/0x12 [<c0103ed6>] syscall_call+0x7/0xb ======================= hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:659] Pid: 659, comm: modprobe Not tainted (2.6.24-1-686 #1) EIP: 0060:[<f8893dfb>] EFLAGS: 00000202 CPU: 0 EIP is at ide_inb+0x3/0x7 [ide_core] EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 00000177 ESI: f88a75f8 EDI: f88a75a0 EBP: fffef7c6 ESP: f66cfb38 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b7e6f040 CR3: 365c0000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<f8894262>] __ide_wait_stat+0x91/0xee [ide_core] [<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core] [<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core] [<c01d34f9>] elv_queue_empty+0x1d/0x1e [<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core] [<c01d34f9>] elv_queue_empty+0x1d/0x1e [<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core] [<c01d3686>] elv_drain_elevator+0x15/0x58 [<c01d3f63>] elv_insert+0x107/0x1ea [<c01d5c9a>] __blk_put_request+0x24/0x75 [<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core] [<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd] [<c01f7560>] vgacon_scroll+0x182/0x19d [<f88ad436>] cdrom_read_tocentry+0x93/0x9e [ide_cd] [<c01d5ea7>] blk_end_sync_rq+0x0/0x23 [<f88ae2e7>] cdrom_read_toc+0x1a8/0x3ff [ide_cd] [<f88aee58>] ide_cd_probe+0x91a/0x947 [ide_cd] [<c01884d0>] iput+0x39/0x62 [<c01b1783>] sysfs_addrm_finish+0x4a/0x194 [<c01b155b>] sysfs_add_one+0xaf/0xb8 [<c01b15b4>] sysfs_addrm_start+0x50/0x81 [<c01b20f3>] sysfs_create_link+0xb8/0xfd [<f8891054>] generic_ide_probe+0x1c/0x1d [ide_core] [<c0241820>] driver_probe_device+0xde/0x15c [<c02bb9e5>] klist_next+0x4b/0x6c [<c0241930>] __driver_attach+0x0/0x79 [<c0241976>] __driver_attach+0x46/0x79 [<c0240dfa>] bus_for_each_dev+0x37/0x59 [<c0241687>] driver_attach+0x16/0x18 [<c0241930>] __driver_attach+0x0/0x79 [<c02410e0>] bus_add_driver+0x6d/0x197 [<c0143721>] sys_init_module+0x15db/0x16f3 [<c016406e>] vma_prio_tree_insert+0x17/0x2a [<c012c7c0>] msleep+0x0/0x12 [<c0103ed6>] syscall_call+0x7/0xb ======================= hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:659] Pid: 659, comm: modprobe Not tainted (2.6.24-1-686 #1) EIP: 0060:[<f8893dfb>] EFLAGS: 00000202 CPU: 0 EIP is at ide_inb+0x3/0x7 [ide_core] EAX: 000001d0 EBX: 00000282 ECX: 00000000 EDX: 00000177 ESI: f88a75f8 EDI: f88a75a0 EBP: ffff066f ESP: f66cfa8c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b7e6f040 CR3: 365c0000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<f8894262>] __ide_wait_stat+0x91/0xee [ide_core] [<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core] [<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core] [<c01d34f9>] elv_queue_empty+0x1d/0x1e [<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core] [<c01d3686>] elv_drain_elevator+0x15/0x58 [<c01d3f63>] elv_insert+0x107/0x1ea [<c01d5c9a>] __blk_put_request+0x24/0x75 [<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core] [<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd] [<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core] [<c01d34f9>] elv_queue_empty+0x1d/0x1e [<f8892c6e>] ide_do_request+0x7d/0x976 [ide_core] [<f88b0517>] ide_cdrom_packet+0x80/0x9f [ide_cd] [<c01d5ea7>] blk_end_sync_rq+0x0/0x23 [<f88b8fac>] cdrom_get_disc_info+0x6c/0x79 [cdrom] [<f88b9085>] cdrom_get_last_written+0x2e/0x106 [cdrom] [<c01d5ea7>] blk_end_sync_rq+0x0/0x23 [<f88ae4d7>] cdrom_read_toc+0x398/0x3ff [ide_cd] [<f88aee58>] ide_cd_probe+0x91a/0x947 [ide_cd] [<c01884d0>] iput+0x39/0x62 [<c01b1783>] sysfs_addrm_finish+0x4a/0x194 [<c01b155b>] sysfs_add_one+0xaf/0xb8 [<c01b15b4>] sysfs_addrm_start+0x50/0x81 [<c01b20f3>] sysfs_create_link+0xb8/0xfd [<f8891054>] generic_ide_probe+0x1c/0x1d [ide_core] [<c0241820>] driver_probe_device+0xde/0x15c [<c02bb9e5>] klist_next+0x4b/0x6c [<c0241930>] __driver_attach+0x0/0x79 [<c0241976>] __driver_attach+0x46/0x79 [<c0240dfa>] bus_for_each_dev+0x37/0x59 [<c0241687>] driver_attach+0x16/0x18 [<c0241930>] __driver_attach+0x0/0x79 [<c02410e0>] bus_add_driver+0x6d/0x197 [<c0143721>] sys_init_module+0x15db/0x16f3 [<c016406e>] vma_prio_tree_insert+0x17/0x2a [<c012c7c0>] msleep+0x0/0x12 [<c0103ed6>] syscall_call+0x7/0xb ======================= hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command # ... several dozen more "status timeout" messages # on attempting to mount a disc: hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command BUG: soft lockup - CPU#1 stuck for 11s! [mount:2368] Pid: 2368, comm: mount Not tainted (2.6.24-1-686 #1) EIP: 0060:[<f8893dfb>] EFLAGS: 00200202 CPU: 1 EIP is at ide_inb+0x3/0x7 [ide_core] EAX: 000001d0 EBX: 00200282 ECX: 00000000 EDX: 00000177 ESI: f88a75f8 EDI: f88a75a0 EBP: 0003d1d5 ESP: f698bb00 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b7e81f00 CR3: 366e5000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<f8894262>] __ide_wait_stat+0x91/0xee [ide_core] [<f8894e09>] ide_wait_stat+0x45/0x72 [ide_core] [<f8892fe0>] ide_do_request+0x3ef/0x976 [ide_core] [<c01d5c9a>] __blk_put_request+0x24/0x75 [<c01d5eec>] blk_put_request+0x22/0x36 [<c01d3686>] elv_drain_elevator+0x15/0x58 [<c01d3f63>] elv_insert+0x107/0x1ea [<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd] [<c01a5e58>] pid_revalidate+0x5a/0xc5 [<f889361b>] ide_do_drive_cmd+0xb4/0xf8 [ide_core] [<f88ad289>] cdrom_queue_packet_command+0x35/0xba [ide_cd] [<f88ad59c>] cdrom_check_status+0x55/0x60 [ide_cd] [<f88b0517>] ide_cdrom_packet+0x80/0x9f [ide_cd] [<c01d5ea7>] blk_end_sync_rq+0x0/0x23 [<f88bbc76>] cdrom_open+0x35f/0x915 [cdrom] [<c0180ad0>] link_path_walk+0xa9/0xb3 [<f89deef5>] xfs_log_move_tail+0x42/0x14d [xfs] [<c01872e4>] __d_lookup+0x91/0xe5 [<c017ea42>] do_lookup+0x4f/0x140 [<c0186ae0>] dput+0x15/0xdc [<c0180904>] __link_path_walk+0xa28/0xb4b [<f89deef5>] xfs_log_move_tail+0x42/0x14d [xfs] [<c01872e4>] __d_lookup+0x91/0xe5 [<c018a8fe>] mntput_no_expire+0x11/0x66 [<c0180ad0>] link_path_walk+0xa9/0xb3 [<c01d9750>] exact_lock+0x7/0xd [<c0243196>] kobj_lookup+0xe4/0x10e [<f88adedf>] idecd_open+0x78/0x8c [ide_cd] [<c0198481>] do_open+0x87/0x255 [<c01987dd>] blkdev_open+0x0/0x4d [<c0198802>] blkdev_open+0x25/0x4d [<c0176ecb>] __dentry_open+0xce/0x185 [<c0176ffc>] nameidata_to_filp+0x24/0x33 [<c017703d>] do_filp_open+0x32/0x39 [<c0176d89>] get_unused_fd_flags+0x4d/0xba [<c0177088>] do_sys_open+0x44/0xc0 [<c017713d>] sys_open+0x1c/0x1e [<c0103e5e>] sysenter_past_esp+0x6b/0xa1 [<c02b0000>] unix_state_double_lock+0x10/0x3c ======================= BUG: soft lockup - CPU#0 stuck for 11s! [hald-addon-stor:1974] Pid: 1974, comm: hald-addon-stor Not tainted (2.6.24-1-686 #1) EIP: 0060:[<c02bdc90>] EFLAGS: 00000286 CPU: 0 EIP is at lock_kernel+0x17/0x2c EAX: f65218b0 EBX: f74473c0 ECX: 00000000 EDX: 00000000 ESI: f72835c0 EDI: fffffff4 EBP: c01987dd ESP: f72bdec0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b7f14195 CR3: 0391f000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [<c019841d>] do_open+0x23/0x255 [<c01987dd>] blkdev_open+0x0/0x4d [<c0198802>] blkdev_open+0x25/0x4d [<c0176ecb>] __dentry_open+0xce/0x185 [<c0176ffc>] nameidata_to_filp+0x24/0x33 [<c017703d>] do_filp_open+0x32/0x39 [<c0176d89>] get_unused_fd_flags+0x4d/0xba [<c0177088>] do_sys_open+0x44/0xc0 [<c017713d>] sys_open+0x1c/0x1e [<c0103e5e>] sysenter_past_esp+0x6b/0xa1 ======================= hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command hdc: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hdc: drive not ready for command ** Loaded modules: Module Size Used by ac 6116 0 battery 13572 0 ipv6 240836 14 firewire_sbp2 14252 0 loop 16804 0 snd_atiixp 18988 0 snd_ac97_codec 92932 1 snd_atiixp ac97_bus 2176 1 snd_ac97_codec snd_pcm_oss 38272 0 snd_pcm 71780 3 snd_atiixp,snd_ac97_codec,snd_pcm_oss snd_mixer_oss 15296 1 snd_pcm_oss snd_seq_dummy 3780 0 evdev 11104 2 snd_seq_oss 29472 0 snd_seq_midi_event 6976 1 snd_seq_oss snd_seq 46544 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_timer 21092 2 snd_pcm,snd_seq snd_seq_device 7820 3 snd_seq_dummy,snd_seq_oss,snd_seq i2c_piix4 8428 0 button 8432 0 psmouse 36464 0 i2c_core 22432 1 i2c_piix4 serio_raw 6660 0 irtty_sir 8096 0 ati_agp 8684 1 snd 48612 9 snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device sir_dev 15460 1 irtty_sir shpchp 31028 0 pci_hotplug 27712 1 shpchp agpgart 31688 1 ati_agp soundcore 7552 1 snd irda 174236 2 irtty_sir,sir_dev rtc 13052 0 snd_page_alloc 10056 2 snd_atiixp,snd_pcm crc_ccitt 2176 1 irda pcspkr 3200 0 xfs 500056 2 sd_mod 27200 0 ide_cd 36224 0 cdrom 32512 1 ide_cd ide_disk 15648 3 usb_storage 77536 0 scsi_mod 141164 3 firewire_sbp2,sd_mod,usb_storage atiixp 4592 0 [permanent] firewire_ohci 17760 0 firewire_core 39232 2 firewire_sbp2,firewire_ohci crc_itu_t 2176 1 firewire_core 8139too 25600 0 mii 5312 1 8139too ide_core 108292 3 ide_cd,ide_disk,atiixp ohci_hcd 21988 0 ehci_hcd 32524 0 usbcore 132940 4 usb_storage,ohci_hcd,ehci_hcd thermal 16028 0 processor 36520 1 thermal fan 4772 0 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon 9100 IGP Host Bridge [1002:5833] (rev 02) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 1: Memory at e0204000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: agpgart-ati Kernel modules: ati-agp 00:01.0 PCI bridge [0604]: ATI Technologies Inc Radeon 9100 IGP AGP Bridge [1002:5838] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: e0000000-e00fffff Prefetchable memory behind bridge: d0000000-dfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:13.0 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #1 [1002:4347] (rev 01) (prog-if 10) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #2 [1002:4348] (rev 01) (prog-if 10) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc EHCI USB Controller [1002:4345] (rev 01) (prog-if 20) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0202000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SMBus [1002:4353] (rev 17) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at e000 [size=16] Region 1: Memory at e0203000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc Dual Channel Bus Master PCI IDE Controller [1002:4349] (prog-if 8a [Master SecP PriP]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at f000 [size=16] Kernel driver in use: ATIIXP_IDE Kernel modules: atiixp 00:14.3 ISA bridge [0601]: ATI Technologies Inc Device [1002:434c] Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP200 3COM 3C920B Ethernet Controller [1002:4342] (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: e0100000-e01fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP150 AC'97 Audio Controller [1002:4341] Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:c0b1] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at e0205000 (32-bit, non-prefetchable) [size=256] Kernel driver in use: ATI IXP AC97 controller Kernel modules: snd-atiixp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon 9100 IGP [1002:5834] Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:f362] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at e0020000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at e0000000 [disabled] [size=128K] Capabilities: <access denied> Kernel modules: radeonfb 02:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at d000 [size=256] Region 1: Memory at e0110000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at e0100000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: 8139too Kernel modules: 8139cp, 8139too 02:06.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev 80) (prog-if 10) Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e0111000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at d400 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-686 depends on: ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-1-686 recommends: ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686: linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk: linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686: linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686: linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/kimage-is-a-directory: linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]