Package: installation-reports Severity: normal Subject: installation-reports: lenny daily / hp dl380g5 Package: installation-reports Severity: normal
-- Package-specific info: Boot method: CD Image version: i386 netinst daily build 2008.07.23 Date: <Date and time of the install> Machine: HP DL380g5 Partitions: <df -Tl will do; the raw partition table is preferred> Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [E] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [E] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [E] Overall install: [EMAIL PROTECTED] Comments/Problems: Thanks for adding the firmware support! I finally got around to testing it out w/ one of the dailies & thought I'd write up the issues I ran into in case any of them aren't yet known. Unable to mount usb stick ------------------------- I created a usb stick w/ the firmware debs in the firmware.tar.gz. In my case it was a virtual usb device, emulated by the HP iLO 2. I created the backend file by mkdosfs'ing an empty 8MB file, loopback mounting it, and unpacking the firmware deb tarball in the root. The installer correctly discovered that I might need firmware for my bnx2 controller, and it asked me if it should look for it on some attached media. I selected yes, and it went away for a bit while it searched devices, but then eventually returned w/ the same prompt. Dropping to a shell, I saw the following messages in dmesg: [ 24.285589] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 24.299221] Unable to load NLS charset utf8 [ 24.299224] FAT: IO charset utf8 not found I am also unable to mount the usb stick from the shell using the same arguments mountmedia uses: # mount /dev/sda /media -tauto The problem appears to be that the Debian kernel is configured to use the utf8 iocodepage by default (see #483781), but the installer does not include the nls_utf8 module. If I override this default by passing the mount option 'iocodepage=iso8559-1', the mount succeeds. If I copy over and load the nls_utf8 module the mount succeeds w/o the iocodepage option. And if I use an ext2 stick and load the ext2 module early on, this entire step succeeds w/o further intervention. fw file dups on error --------------------- minor - but each time I returned to the "should i look for firmware" screen, the displayed list would include more copies of the same filenames. To illustrate, see the following screen shots: http://free.linux.hp.com/~dannf/d-i-20080723/missing-fw-1.png http://free.linux.hp.com/~dannf/d-i-20080723/missing-fw-2.png http://free.linux.hp.com/~dannf/d-i-20080723/missing-fw-3.png fails to install fw debs into target ------------------------------------ I lazily dumped all of the fw debs from the firmware.tar.gz onto my stick instead of just the one I needed (bnx2). This caused problems during the base install: http://free.linux.hp.com/~dannf/d-i-20080723/busybox-error.png Looking at syslog, it appears that the problem is unmet dependencies for some of the firmware debs: base-installer: info: Available initramfs generator(s): 'initramfs-tools' Reading package lists... Building dependency tree... Reading state information... You might want to run `apt-get -f install' to correct these: The following packages have unmet dependencies: atmel-firmware: Depends: perl but it is not installable Depends: udev (>= 0.070-3) but it is not going to be installed or hotplug (>= 0.0.20040329-12) but it is not installable zd1211-firmware: Depends: udev (>= 0.070-3) but it is not going to be installed or hotplug (>= 0.0.20040329-19) but it is not installable E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). base-installer: error: exiting on error base-installer/kernel/failed-package-install Full syslog file: http://free.linux.hp.com/~dannf/d-i-20080723/syslog Grub installed to usb stick instead of system disk -------------------------------------------------- When prompted if I wanted grub installed to the MBR, I said sure - but that ended up installing grub to my firmware usb stick ;( Not sure there's anything we can about this one, other than potentially warn the user. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [EMAIL PROTECTED] ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="5.0 (lenny) - installer build 20080723-19:07" X_INSTALLATION_MEDIUM=cdrom ============================================== Installer hardware-summary: ============================================== umame -a: Linux dl380g5 2.6.25-2-486 #1 Fri Jun 27 02:39:22 UTC 2008 i686 unknown lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 5000P Chipset Memory Controller Hub [8086:25d8] (rev 93) lspci -knn: 00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 2 [8086:25e2] (rev 93) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 [8086:25e3] (rev 93) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 [8086:25f8] (rev 93) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 [8086:25e5] (rev 93) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 6-7 [8086:25f9] (rev 93) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 [8086:25e7] (rev 93) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 93) lspci -knn: 00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 93) lspci -knn: 00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev 93) lspci -knn: 00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev 93) lspci -knn: 00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev 93) lspci -knn: 00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev 93) lspci -knn: 00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev 93) lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 [8086:2690] (rev 09) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 [8086:2692] (rev 09) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 [8086:268a] (rev 09) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #4 [8086:268b] (rev 09) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: Kernel modules: ehci-hcd lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09) lspci -knn: 00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller [8086:269e] (rev 09) lspci -knn: Kernel driver in use: PIIX_IDE lspci -knn: Kernel modules: piix lspci -knn: 01:03.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02) lspci -knn: 01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 03) lspci -knn: 01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 03) lspci -knn: 01:04.4 USB Controller [0c03]: Hewlett-Packard Company Proliant iLO2 virtual USB controller [103c:3300] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 01:04.6 IPMI SMIC interface [0c07]: Hewlett-Packard Company Proliant iLO2 virtual UART [103c:3302] lspci -knn: 02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c2) lspci -knn: 03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 11) lspci -knn: Kernel driver in use: bnx2 lspci -knn: Kernel modules: bnx2 lspci -knn: 04:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev c2) lspci -knn: 05:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet [14e4:164c] (rev 11) lspci -knn: Kernel driver in use: bnx2 lspci -knn: Kernel modules: bnx2 lspci -knn: 06:00.0 RAID bus controller [0104]: Hewlett-Packard Company Smart Array Controller [103c:3230] (rev 01) lspci -knn: Kernel driver in use: cciss lspci -knn: Kernel modules: cciss lspci -knn: 09:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 09:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) lspci -knn: 0a:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 0a:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 [8086:3514] (rev 01) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 0a:02.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 [8086:3518] (rev 01) lspci -knn: Kernel driver in use: pcieport-driver lsmod: Module Size Used by lsmod: ufs 69764 0 lsmod: qnx4 10628 0 lsmod: ntfs 189760 0 lsmod: xfs 462836 0 lsmod: reiserfs 199936 0 lsmod: jfs 159452 0 lsmod: ext3 117640 1 lsmod: jbd 38932 1 ext3 lsmod: bnx2 57352 0 lsmod: firmware_class 8832 1 bnx2 lsmod: vfat 11648 0 lsmod: fat 45852 1 vfat lsmod: ext2 62216 0 lsmod: mbcache 7680 2 ext3,ext2 lsmod: cciss 56324 3 lsmod: isofs 31908 0 lsmod: nls_base 6784 5 ntfs,jfs,vfat,fat,isofs lsmod: zlib_inflate 14208 1 isofs lsmod: rsrc_nonstatic 11520 0 lsmod: pcmcia_core 36112 1 rsrc_nonstatic lsmod: ide_generic 1280 0 [permanent] lsmod: sg 33328 0 lsmod: sd_mod 25872 0 lsmod: sr_mod 16420 0 lsmod: fan 5508 0 lsmod: ide_cd_mod 32672 0 lsmod: cdrom 31776 2 sr_mod,ide_cd_mod lsmod: usb_storage 76096 0 lsmod: scsi_mod 138508 5 cciss,sg,sd_mod,sr_mod,usb_storage lsmod: usbhid 39424 0 lsmod: hid 34816 1 usbhid lsmod: ff_memless 5128 1 usbhid lsmod: piix 7044 0 [permanent] lsmod: ide_core 98500 3 ide_generic,ide_cd_mod,piix lsmod: ehci_hcd 31756 0 lsmod: uhci_hcd 21776 0 lsmod: usbcore 127600 5 usb_storage,usbhid,ehci_hcd,uhci_hcd lsmod: thermal 18844 0 lsmod: processor 33204 1 thermal df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 453244 68 453176 0% /dev df: tmpfs 453244 68 453176 0% /dev df: /dev/cciss/c0d0p1 67915316 698424 63766936 1% /target df: /dev/cciss/c0d0p1 67915316 698424 63766936 1% /dev/.static/dev df: tmpfs 453244 68 453176 0% /target/dev free: total used free shared buffers free: Mem: 906492 590424 316068 0 1384 free: Swap: 2650684 0 2650684 free: Total: 3557176 590424 2966752 /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 15 /proc/cpuinfo: model name : Intel(R) Xeon(R) CPU 5160 @ 3.00GHz /proc/cpuinfo: stepping : 6 /proc/cpuinfo: cpu MHz : 3000.138 /proc/cpuinfo: cache size : 4096 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 10 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr dca lahf_lm /proc/cpuinfo: bogomips : 6004.33 /proc/cpuinfo: clflush size : 64 /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-006f : keyboard /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : 0000:00:1f.1 /proc/ioports: 01f0-01f7 : 0000:00:1f.1 /proc/ioports: 01f0-01f7 : ide0 /proc/ioports: 02f8-02ff : pnp 00:01 /proc/ioports: 02f8-02ff : serial /proc/ioports: 0376-0376 : 0000:00:1f.1 /proc/ioports: 03c0-03df : vga+ /proc/ioports: 03f6-03f6 : 0000:00:1f.1 /proc/ioports: 03f6-03f6 : ide0 /proc/ioports: 03f8-03ff : serial /proc/ioports: 0408-040f : pnp 00:01 /proc/ioports: 04d0-04d1 : pnp 00:01 /proc/ioports: 0500-050f : 0000:00:1f.1 /proc/ioports: 0500-0507 : ide0 /proc/ioports: 0508-050f : ide1 /proc/ioports: 0700-071f : pnp 00:01 /proc/ioports: 0800-083f : pnp 00:01 /proc/ioports: 0900-097f : pnp 00:01 /proc/ioports: 0900-0903 : ACPI PM1a_EVT_BLK /proc/ioports: 0904-0907 : ACPI PM1a_CNT_BLK /proc/ioports: 0908-090b : ACPI PM_TMR /proc/ioports: 0928-092f : ACPI GPE0_BLK /proc/ioports: 0c80-0c83 : pnp 00:01 /proc/ioports: 0ca0-0ca1 : pnp 00:01 /proc/ioports: 0ca4-0ca5 : pnp 00:01 /proc/ioports: 0cd4-0cd7 : pnp 00:01 /proc/ioports: 0cf8-0cff : PCI conf1 /proc/ioports: 0f50-0f58 : pnp 00:01 /proc/ioports: 1000-101f : 0000:00:1d.0 /proc/ioports: 1000-101f : uhci_hcd /proc/ioports: 1020-103f : 0000:00:1d.1 /proc/ioports: 1020-103f : uhci_hcd /proc/ioports: 1040-105f : 0000:00:1d.2 /proc/ioports: 1040-105f : uhci_hcd /proc/ioports: 1060-107f : 0000:00:1d.3 /proc/ioports: 1060-107f : uhci_hcd /proc/ioports: 2000-3fff : PCI Bus #01 /proc/ioports: 2800-28ff : 0000:01:04.0 /proc/ioports: 3000-30ff : 0000:01:03.0 /proc/ioports: 3400-34ff : 0000:01:04.2 /proc/ioports: 3800-381f : 0000:01:04.4 /proc/ioports: 3800-381f : uhci_hcd /proc/ioports: 4000-4fff : PCI Bus #06 /proc/ioports: 4000-40ff : 0000:06:00.0 /proc/ioports: 4000-40ff : cciss /proc/iomem: 00000000-0009f3ff : System RAM /proc/iomem: 0009f400-0009ffff : reserved /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000cafff : Video ROM /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-cffc7fff : System RAM /proc/iomem: 00100000-0029d2a6 : Kernel code /proc/iomem: 0029d2a7-0034ef9f : Kernel data /proc/iomem: 003a2000-003dd7f7 : Kernel bss /proc/iomem: cffc8000-cffcffff : ACPI Tables /proc/iomem: cffd0000-cfffffff : reserved /proc/iomem: d4000000-d40fffff : PCI Bus #06 /proc/iomem: d4000000-d403ffff : 0000:06:00.0 /proc/iomem: d4100000-d41fffff : PCI Bus #02 /proc/iomem: d4100000-d41fffff : PCI Bus #03 /proc/iomem: d4100000-d41007ff : 0000:03:00.0 /proc/iomem: d4200000-d42fffff : PCI Bus #04 /proc/iomem: d4200000-d42fffff : PCI Bus #05 /proc/iomem: d4200000-d42007ff : 0000:05:00.0 /proc/iomem: d8000000-dfffffff : PCI Bus #01 /proc/iomem: d8000000-dfffffff : 0000:01:03.0 /proc/iomem: e0000000-efffffff : pnp 00:01 /proc/iomem: f7df0000-f7df03ff : 0000:00:1d.7 /proc/iomem: f7df0000-f7df03ff : ehci_hcd /proc/iomem: f7e00000-f7ffffff : PCI Bus #01 /proc/iomem: f7e00000-f7e1ffff : 0000:01:03.0 /proc/iomem: f7e20000-f7e2ffff : 0000:01:04.2 /proc/iomem: f7ef0000-f7ef00ff : 0000:01:04.6 /proc/iomem: f7f00000-f7f7ffff : 0000:01:04.2 /proc/iomem: f7fc0000-f7fc1fff : 0000:01:04.2 /proc/iomem: f7fd0000-f7fd07ff : 0000:01:04.2 /proc/iomem: f7fe0000-f7fe01ff : 0000:01:04.0 /proc/iomem: f7ff0000-f7ffffff : 0000:01:03.0 /proc/iomem: f8000000-f9ffffff : PCI Bus #02 /proc/iomem: f8000000-f9ffffff : PCI Bus #03 /proc/iomem: f8000000-f9ffffff : 0000:03:00.0 /proc/iomem: f8000000-f9ffffff : bnx2 /proc/iomem: fa000000-fbffffff : PCI Bus #04 /proc/iomem: fa000000-fbffffff : PCI Bus #05 /proc/iomem: fa000000-fbffffff : 0000:05:00.0 /proc/iomem: fa000000-fbffffff : bnx2 /proc/iomem: fdd00000-fdefffff : PCI Bus #06 /proc/iomem: fddf0000-fddf0fff : 0000:06:00.0 /proc/iomem: fddf0000-fddf0fff : cciss /proc/iomem: fde00000-fdefffff : 0000:06:00.0 /proc/iomem: fde00000-fdefffff : cciss /proc/iomem: fdf00000-fdffffff : PCI Bus #09 /proc/iomem: fe000000-febfffff : pnp 00:01 /proc/iomem: fec00000-fecfffff : reserved /proc/iomem: fed00000-fed003ff : HPET 0 /proc/iomem: fee00000-fee0ffff : reserved /proc/iomem: ffc00000-ffffffff : reserved /proc/interrupts: CPU0 /proc/interrupts: 0: 135 IO-APIC-edge timer /proc/interrupts: 1: 2 IO-APIC-edge i8042 /proc/interrupts: 3: 26534 IO-APIC-edge serial /proc/interrupts: 9: 0 IO-APIC-fasteoi acpi /proc/interrupts: 12: 3 IO-APIC-edge i8042 /proc/interrupts: 14: 669 IO-APIC-edge ide0 /proc/interrupts: 16: 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb6 /proc/interrupts: 17: 0 IO-APIC-fasteoi uhci_hcd:usb2 /proc/interrupts: 18: 0 IO-APIC-fasteoi uhci_hcd:usb3 /proc/interrupts: 19: 0 IO-APIC-fasteoi uhci_hcd:usb4 /proc/interrupts: 22: 39140 IO-APIC-fasteoi uhci_hcd:usb5 /proc/interrupts: 208: 109658 PCI-MSI-edge eth0 /proc/interrupts: 210: 129594 PCI-MSI-edge cciss0 /proc/interrupts: NMI: 0 Non-maskable interrupts /proc/interrupts: LOC: 49081 Local timer interrupts /proc/interrupts: TRM: 0 Thermal event interrupts /proc/interrupts: SPU: 0 Spurious interrupts /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 906492 kB /proc/meminfo: MemFree: 315776 kB /proc/meminfo: Buffers: 1384 kB /proc/meminfo: Cached: 535172 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 164676 kB /proc/meminfo: Inactive: 378456 kB /proc/meminfo: SwapTotal: 2650684 kB /proc/meminfo: SwapFree: 2650684 kB /proc/meminfo: Dirty: 672 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 6600 kB /proc/meminfo: Mapped: 1692 kB /proc/meminfo: Slab: 35580 kB /proc/meminfo: SReclaimable: 27372 kB /proc/meminfo: SUnreclaim: 8208 kB /proc/meminfo: PageTables: 276 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: CommitLimit: 3103928 kB /proc/meminfo: Committed_AS: 9812 kB /proc/meminfo: VmallocTotal: 122564 kB /proc/meminfo: VmallocUsed: 8536 kB /proc/meminfo: VmallocChunk: 113008 kB /proc/meminfo: HugePages_Total: 0 /proc/meminfo: HugePages_Free: 0 /proc/meminfo: HugePages_Rsvd: 0 /proc/meminfo: HugePages_Surp: 0 /proc/meminfo: Hugepagesize: 4096 kB /proc/bus/input/devices: I: Bus=0003 Vendor=03f0 Product=1027 Version=0101 /proc/bus/input/devices: N: Name="HP Virtual Keyboard" /proc/bus/input/devices: P: Phys=usb-0000:01:04.4-1/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=10000 7 ff980000 7ff febeffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=1f /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=03f0 Product=1027 Version=0101 /proc/bus/input/devices: N: Name="HP Virtual Keyboard" /proc/bus/input/devices: P: Phys=usb-0000:01:04.4-1/input1 /proc/bus/input/devices: S: Sysfs=/class/input/input1 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=mouse0 /proc/bus/input/devices: B: EV=17 /proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0 /proc/bus/input/devices: B: REL=3 /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.25-2-686 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
