Package: hpoj
Version: 0.91-13.2
Severity: serious
[Note to self as maintainer]
Prompting for user input by hand is now depreciated (policy 3.9.1).
Even though I didn't want to change my configuration during a
dist-upgrade from etch->lenny I was presented with:
Setting up hpoj (0.91-13.2) ...
Installing new version of config file /etc/init.d/hpoj ...
hpoj: To enable scanning with sane you must
hpoj: manually uncomment the hpoj entry in /etc/sane.d/dll.conf.
Stopping the HP OfficeJet Linux driver.
----------------------------------------------------------------------
This program manages devices controlled by the HP OfficeJet Linux
driver (hpoj). It attempts to probe your computer for local parallel-
and USB-connected devices, and allows you to specify network addresses
for remote JetDirect-connected devices.
If you experience any difficulties in detecting your device(s), then
refer to the hpoj documentation for troubleshooting information.
----------------------------------------------------------------------
Currently defined device names ([*]=default):
"mlc:usb:psc_1200_series"
Model is "psc 1200 series".
Serial number is "UA4C3GB2TFT0".
Press <Enter> alone to continue, or if you would like to delete
or reconfigure one of the above-listed devices, then enter the
device name to delete here --->
----------------------------------------------------------------------
Probe for parallel-connected devices ([y]/n)? n
----------------------------------------------------------------------
Probe for USB-connected devices ([y]/n)? n
----------------------------------------------------------------------
Press <Enter> alone to continue, or if you would like to add a
JetDirect-connected device, then enter its dotted-decimal
IP address or hostname here --->
----------------------------------------------------------------------
Done updating device configuration files stored under /etc/ptal.
If you make manual changes to those files, then be sure to run
"/etc/init.d/hpoj start" so they will take effect.
----------------------------------------------------------------------
Starting the HP OfficeJet Linux driver.
mlc:usb:psc_1200_series
Stopping the HP OfficeJet Linux driver.
Starting the HP OfficeJet Linux driver.
mlc:usb:psc_1200_series
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages hpoj depends on:
ii adduser 3.110 add and remove users and groups
ii libc6 2.7-13 GNU C Library: Shared libraries
ii libgcc1 1:4.3.2-1 GCC support library
ii libsane 1.0.19-21 API library for scanners
ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3
ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library
Versions of packages hpoj recommends:
ii cups [cupsys] 1.3.8-1lenny1 Common UNIX Printing System(tm) -
ii cups-bsd [lpr] 1.3.8-1lenny1 Common UNIX Printing System(tm) -
ii cupsys 1.3.8-1lenny1 Common UNIX Printing System (trans
ii foomatic-filters 3.0.2-20080211-3.2 OpenPrinting printer support - fil
ii hpijs 2.8.6.b-1 HP Linux Printing and Imaging - gs
Versions of packages hpoj suggests:
ii cups-bsd [cupsys-bsd] 1.3.8-1lenny1 Common UNIX Printing System(tm) -
ii cupsys-bsd 1.3.8-1lenny1 Common UNIX Printing System (trans
ii ghostscript-x [gs] 8.62.dfsg.1-3.1 The GPL Ghostscript PostScript/PDF
ii hplip 2.8.6.b-1 HP Linux Printing and Imaging Syst
pn hpoj-xojpanel <none> (no description available)
ii mtools 3.9.11-1 Tools for manipulating MSDOS files
pn sane <none> (no description available)
pn xsane <none> (no description available)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
