Package: ocfs2-tools
Version: 1.2.4-1.2
Severity: normal
Hi,
we're actually playing with Lenny, an iSCSI-Storage and a mounted Filesystem
via OCFS2. First off all, the init-Skript does not install the
OCFS2-kernel-module
which is needed.
We activate the iSCSI-target as follows:
iscsiadm -m discovery -t sendtargets -p $IP
iscsiadm -m node -T iqn.2008-09:stor.target0 -p $IP:3260 -l
works, the iSCSI disc is found:
Oct 8 13:43:47 cluster-mx1 kernel: [ 8869.332922] sd 1:0:0:0: [sdb] Attached
SCSI disk
so, i've mounted the ocfs2-filesystem into the local filesystem-tree:
/dev/sdb1 on /mnt type ocfs2 (rw,_netdev,heartbeat=local)
then, for the purpose of testings i disconnected the ethernet-cable on the
server:
Oct 8 15:07:40 cluster-mx1 kernel: [ 153.722823] tg3: eth0: Link is down.
After some minutes, the server suddenly reboots ("shortened output"):
Oct 8 15:08:37 cluster-mx1 kernel: klogd 1.5.0#5, log source = /proc/kmsg
started.
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] Initializing cgroup subsys
cpuset
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] Initializing cgroup subsys
cpu
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] Linux version 2.6.26-1-686
(Debian 2.6.26-5) ([EMAIL PROTECTED]
g) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep
10 16:46:13 UTC 2008
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] BIOS-provided physical RAM
map:
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] BIOS-e820: 0000000000000000
- 000000000009ec00 (usable)
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] BIOS-e820: 000000000009ec00
- 00000000000a0000 (reserved)
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] BIOS-e820: 00000000000f0000
- 0000000000100000 (reserved)
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] BIOS-e820: 0000000000100000
- 000000007f6f0000 (usable)
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] BIOS-e820: 000000007f6f0000
- 000000007f6f3000 (ACPI NVS)
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] BIOS-e820: 000000007f6f3000
- 000000007f700000 (ACPI data)
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] BIOS-e820: 00000000e0000000
- 00000000f0000000 (reserved)
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] BIOS-e820: 00000000fec00000
- 0000000100000000 (reserved)
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] 1142MB HIGHMEM available.
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] 896MB LOWMEM available.
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] found SMP MP-table at
[c00f4c60] 000f4c60
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] Entering add_active_range(0,
0, 521968) 0 entries of 256 used
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] Zone PFN ranges:
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] DMA 0 ->
4096
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] Normal 4096 ->
229376
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] HighMem 229376 ->
521968
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] Movable zone start PFN for
each node
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] early_node_map[1] active PFN
ranges
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] 0: 0 -> 521968
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] On node 0 totalpages: 521968
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] DMA zone: 32 pages used
for memmap
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] DMA zone: 0 pages reserved
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] DMA zone: 4064 pages, LIFO
batch:0
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] Normal zone: 1760 pages
used for memmap
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] Normal zone: 223520 pages,
LIFO batch:31
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] HighMem zone: 2286 pages
used for memmap
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] HighMem zone: 290306
pages, LIFO batch:31
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] Movable zone: 0 pages used
for memmap
Oct 8 15:08:37 cluster-mx1 kernel: [ 0.000000] DMI 2.2 present.
I reproduced this on a second server.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages ocfs2-tools depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii libc6 2.7-13 GNU C Library: Shared libraries
ii libcomerr2 1.41.0-3 common error description library
ii libglib2.0-0 2.16.5-1 The GLib library of C routines
ii libncurses5 5.6+20080830-1 shared libraries for terminal hand
ii libreadline5 5.2-3 GNU readline and history libraries
ii libuuid1 1.41.0-3 universally unique id library
ocfs2-tools recommends no packages.
Versions of packages ocfs2-tools suggests:
pn ocfs2console <none> (no description available)
-- debconf information:
ocfs2-tools/heartbeat_threshold: 7
ocfs2-tools/reconnect_delay: 2000
ocfs2-tools/init: false
ocfs2-tools/keepalive_delay: 5000
ocfs2-tools/clustername: ocfs2
ocfs2-tools/idle_timeout: 10000
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
