Package: installation-reports
Boot method: < network>
ref:
http://www.linuxbasement.com/content/installing-ubuntu-or-other-distributuin-without-burning-a-cd
Image version:
http://people.debian.org/~joeyh/d-i/images/daily/netboot/debian-installer/i386/linux
http://people.debian.org/~joeyh/d-i/images/daily/netboot/debian-installer/i386/initrd.gz
Date: 11/29/2009 17:00 CST
Machine: <Desktop, ATX, MainBoard: DFI CA61>
Processor: 500Mhz celeron
Memory: 190468k
Partitions: <df -Tl will do; the raw partition table is preferred>
Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 510 4096543+ 7 HPFS/NTFS
/dev/hda2 511 771 2096482+ 6 FAT16
/dev/hda3 772 1032 2096482+ 6 FAT16
/dev/hda4 1033 9729 69858652+ 5 Extended
/dev/hda5 1033 1293 2096451 6 FAT16
/dev/hda6 1294 1554 2096451 6 FAT16
/dev/hda7 1555 1556 16033+ 83 Linux
/dev/hda8 1557 1558 16033+ 83 Linux
/dev/hda9 1559 2081 4200966 83 Linux
/dev/hda10 2082 2862 6273351 83 Linux
/dev/hda11 2863 3643 6273351 83 Linux
/dev/hda12 3644 4424 6273351 83 Linux
/dev/hda13 4425 5205 6273351 83 Linux
/dev/hda14 * 5206 5986 6273351 83 Linux
/dev/hda15 5987 6247 2096451 82 Linux swap / Solaris
/dev/hda16 6248 9729 27969133+ 83 Linux
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] [1106:0691] (rev 44)
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] [1106:8598]
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C596 ISA [Mobile
South] [1106:0596] (rev 12)
00:07.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 08)
00:07.3 Host bridge [0600]: VIA Technologies, Inc. VT82C596 Power Management
[1106:3051] (rev 20)
00:09.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152
[1011:0024] (rev 03)
00:0b.0 Modem [0703]: PCTel Inc HSP MicroModem 56 [134d:7890] (rev 02)
00:0d.0 Multimedia audio controller [0401]: ESS Technology Unknown device
[125d:1990]
00:0f.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
02:01.0 VGA compatible controller [0300]: Cirrus Logic GD 5480 [1013:00bc]
(rev 23)
02:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5480 [1013:00bc]
(rev 23)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Installation step failed:
Configuring gtk2-engines-spherecrystal
I am not aware of any problem that the above caused. I continued with the
installation
without any problems. No operation problems after re-boot.
I have sound because of the 2.6.18-6-686 kernel furnished by this
installation as
compared to a newer kernel (2.6.26-1.686)
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Did not download a disc image for the network install. Downloaded linux,
initrd.gz ;
booted from these with grub. See reference, "Boot method" section.
