Package: pcscd
Version: 1.4.102-1
Severity: normal
~$ ls -l /dev/bus/usb/002/004
crw-rw-r-- 1 root root 189, 131 2008-12-06 23:09 /dev/bus/usb/002/004
~$ udevinfo info --attribute-walk --name=/dev/bus/usb/002/004
Udevinfo starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/class/usb_device/usbdev2.4':
KERNEL=="usbdev2.4"
SUBSYSTEM=="usb_device"
DRIVER==""
looking at parent device '/devices/pci0000:00/0000:00:1d.1/usb2/2-2':
KERNELS=="2-2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}=="CCID Class"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bMaxPower}=="100mA"
ATTRS{urbnum}=="202"
ATTRS{idVendor}=="04e6"
ATTRS{idProduct}=="5115"
ATTRS{bcdDevice}=="0518"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="16"
ATTRS{speed}=="12"
ATTRS{busnum}=="2"
ATTRS{devnum}=="4"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="SCM Microsystems Inc."
ATTRS{product}=="SCR33x USB Smart Card Reader"
ATTRS{serial}=="21120618201041"
looking at parent device '/devices/pci0000:00/0000:00:1d.1/usb2':
KERNELS=="usb2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="89"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0001"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="2"
ATTRS{devnum}=="1"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="2"
ATTRS{quirks}=="0x0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.26-1-686 uhci_hcd"
ATTRS{product}=="UHCI Host Controller"
ATTRS{serial}=="0000:00:1d.1"
ATTRS{authorized_default}=="1"
looking at parent device '/devices/pci0000:00/0000:00:1d.1':
KERNELS=="0000:00:1d.1"
SUBSYSTEMS=="pci"
DRIVERS=="uhci_hcd"
ATTRS{vendor}=="0x8086"
ATTRS{device}=="0x27c9"
ATTRS{subsystem_vendor}=="0x1043"
ATTRS{subsystem_device}=="0x830f"
ATTRS{class}=="0x0c0300"
ATTRS{irq}=="19"
ATTRS{local_cpus}=="ff"
ATTRS{local_cpulist}=="0-7"
ATTRS{modalias}=="pci:v00008086d000027C9sv00001043sd0000830Fbc0Csc03i00"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
~$ gpg --card-status
gpg: pcsc_establish_context failed: no service (0x8010001d)
gpg: card reader not available
gpg: OpenPGP card not available: general error
~$ groups user
uesr ... scard ...
# as root the device works fine
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable'), (100, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages pcscd depends on:
ii hal 0.5.11-6 Hardware Abstraction Layer
ii libc6 2.7-16 GNU C Library: Shared libraries
ii libccid [pcsc-ifd-handler] 1.3.8-1 PC/SC driver for USB CCID smart ca
ii libdbus-1-3 1.2.1-4 simple interprocess messaging syst
ii libhal1 0.5.11-6 Hardware Abstraction Layer - share
ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip
pcscd recommends no packages.
pcscd suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
