Package: xserver-xorg-core
Version: 2:1.5.99.901-1
Severity: important

after upgrading, the xfontsel app sees just the "fixed" font and no other
freetype font is being loaded.
Xorg.log says:
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)

And this is true, the /usr/lib/xorg/modules/fonts/libfreetype.so file is missing
in the xserver-xorg-core package.


-- Package-specific info:
Contents of /var/lib/x11/X.roster:
xserver-xorg

/var/lib/x11/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx 1 root root 13 2008-11-04 20:36 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1868112 2009-01-21 21:04 /usr/bin/Xorg

Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg

VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset 
Integrated Graphics Controller (rev 03)

/etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum.

Xorg X server configuration file status:
-rw-r--r-- 1 root root 2521 2009-01-10 13:18 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Module"
        Load    "bitmap"
        Load    "dbe"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "record"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc104"
        Option          "XkbLayout"     "us"
#        Option          "AutoRepeat"    "200 50"
#       Option          "XkbVariant"    "nodeadkeys"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "Emulate3Buttons"       "false"
EndSection

Section "Device"
        Identifier      "Intel"
        Driver          "intel"
#       Option          "NoAccel"       "true"
EndSection

Section "Monitor"
        Identifier      "DELL"
        Option          "DPMS"
#       HorizSync       30-83
#       VertRefresh     56-76
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "Intel"
        Monitor         "DELL"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1600x1200" "1280x960" "1024x768" "800x600" 
"640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1600x1200" "1280x960" "1024x768" "800x600" 
"640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1600x1200" "1280x960" "1024x768" "800x600" 
"640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1600x1200" "1280x960" "1024x768" "800x600" 
"640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1600x1200" "1280x960" "1024x768" "800x600" 
"640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1600x1200" "1280x960" "1024x768" "800x600" 
"640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        Option          "AutoAddDevices"        "false"
        Option          "AutoEnableDevices"     "false"
EndSection

Section "DRI"
        Mode    0666
EndSection



Xorg X server log files on system:
-rw-r--r-- 1 root root 23026 2009-01-24 11:32 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.5.99.901 (1.6.0 RC 1)
Release Date: (unreleased)
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.28 x86_64 Debian
Current Operating System: Linux pikachu 2.6.26-1-amd64 #1 SMP Sat Jan 10 
17:57:00 UTC 2009 x86_64
Build Date: 21 January 2009  08:00:45PM
xorg-server 2:1.5.99.901-1 (jcris...@debian.org) 
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 24 11:26:30 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "DELL"
(**) |   |-->Device "Intel"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) Option "AutoAddDevices" "false"
(**) Option "AutoEnableDevices" "false"
(**) Not automatically adding devices
(**) Not automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(==) FontPath set to:
        built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0xd60
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 5.0
        X.Org XInput driver : 4.0
        X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0...@0:2:0) Intel Corporation 4 Series Chipset Integrated Graphics 
Controller rev 3, Mem @ 0xfe400000/4194304, 0xe0000000/268435456, I/O @ 
0x0000bc00/8
(--) PCI: (0...@0:2:1) Intel Corporation 4 Series Chipset Integrated Graphics 
Controller rev 3, Mem @ 0xfe900000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in 
the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in 
the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in 
the config file.
(II) "record" will be loaded. This was enabled by default and also specified in 
the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in 
the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.0.0
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.1.0
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 2.6.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.4.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
        965GM, 965GME/GLE, G33, Q35, Q33,
        Mobile Intel? GM45 Express Chipset,
        Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 0...@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B]
        [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B]
        [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
        [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B]
        [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 0.1.0
        ABI class: X.Org Video Driver, version 5.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
(--) intel(0): Chipset: "G45/G43"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xFE400000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section DELL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered 
at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered 
at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output HDMI-2 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_C" initialized.
(II) intel(0): HDMI output 2 detected
(II) intel(0): I2C device "HDMIDDC_B:E-EDID segment register" registered at 
address 0x60.
(II) intel(0): I2C device "HDMIDDC_B:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): I2C device "HDMIDDC_C:E-EDID segment register" registered at 
address 0x60.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output HDMI-1 connected
(II) intel(0): Output HDMI-2 disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output HDMI-1 using initial mode 1600x1200
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 65532 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
        compiled for 1.5.99.901, module version = 2.4.0
        ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x10000120 to 
0x38000020
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x10000000 to 
0x38000000
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] -1  0       0xffffffff - 0xffffffff (0x1) MX[B]
        [1] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
        [5] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
        [6] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
        [7] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [8] -1  0       0x00000000 - 0x00000000 (0x1) IX[B]
        [9] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [10] 0  0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 1135360 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 4541436 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfe400000
(II) intel(0): [drm] ring buffer = 0xe0000000
(II) intel(0): [drm] mapped front buffer at 0xe0200000, handle = 0xe0200000
(II) intel(0): [drm] mapped back buffer at 0xe2aa0000, handle = 0xe2aa0000
(II) intel(0): [drm] mapped depth buffer at 0xe34c8000, handle = 0xe34c8000
(II) intel(0): [drm] mapped classic textures at 0xe4000000, handle = 0xe4000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31948800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x03fff000 (pgoffset 16383)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x04000000 (pgoffset 16384)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00131fff: fake bufmgr (1024 kB)
(II) intel(0): 0x00132000-0x00140fff: exa G965 state buffer (60 kB)
(II) intel(0): 0x00200000-0x00c27fff: front buffer (10400 kB) X tiled
(II) intel(0): 0x00c28000-0x02a9ffff: exa offscreen (31200 kB)
(II) intel(0): 0x02aa0000-0x034c7fff: back buffer (10400 kB) X tiled
(II) intel(0): 0x034c8000-0x03eeffff: depth buffer (10400 kB) Y tiled
(II) intel(0): 0x03fff000:            end of stolen memory
(II) intel(0): 0x03fff000-0x03ffffff: HW status (4 kB)
(II) intel(0): 0x04000000-0x05ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output HDMI-1 is connected to pipe A
(II) intel(0):   Output HDMI-2 is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 367 x 275
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Generic Keyboard: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "false"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(**) Configured Mouse: (accel) keeping acceleration scheme 1
(**) Configured Mouse: (accel) filter chain progression: 2.00
(**) Configured Mouse: (accel) filter stage 0: 20.00 ms
(**) Configured Mouse: (accel) set acceleration profile 0
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) config/hal: Adding input device KYE Genius USB Wheel Mouse
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed (8)
exaCopyDirty: Pending damage region empty!
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x03fff000 (pgoffset 16383)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x04000000 (pgoffset 16384)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00131fff: fake bufmgr (1024 kB)
(II) intel(0): 0x00132000-0x00140fff: exa G965 state buffer (60 kB)
(II) intel(0): 0x00200000-0x00c27fff: front buffer (10400 kB) X tiled
(II) intel(0): 0x00c28000-0x02a9ffff: exa offscreen (31200 kB)
(II) intel(0): 0x02aa0000-0x034c7fff: back buffer (10400 kB) X tiled
(II) intel(0): 0x034c8000-0x03eeffff: depth buffer (10400 kB) Y tiled
(II) intel(0): 0x03fff000:            end of stolen memory
(II) intel(0): 0x03fff000-0x03ffffff: HW status (4 kB)
(II) intel(0): 0x04000000-0x05ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output HDMI-1 is connected to pipe A
(II) intel(0):   Output HDMI-2 is connected to pipe none
(II) intel(0): [drm] mapped front buffer at 0xe0200000, handle = 0x2fff8000
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x03fff000 (pgoffset 16383)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x04000000 (pgoffset 16384)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00131fff: fake bufmgr (1024 kB)
(II) intel(0): 0x00132000-0x00140fff: exa G965 state buffer (60 kB)
(II) intel(0): 0x00200000-0x00c27fff: front buffer (10400 kB) X tiled
(II) intel(0): 0x00c28000-0x02a9ffff: exa offscreen (31200 kB)
(II) intel(0): 0x02aa0000-0x034c7fff: back buffer (10400 kB) X tiled
(II) intel(0): 0x034c8000-0x03eeffff: depth buffer (10400 kB) Y tiled
(II) intel(0): 0x03fff000:            end of stolen memory
(II) intel(0): 0x03fff000-0x03ffffff: HW status (4 kB)
(II) intel(0): 0x04000000-0x05ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output HDMI-1 is connected to pipe A
(II) intel(0):   Output HDMI-2 is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) Configured Mouse: ps2EnableDataReporting: succeeded


-- System Information:
Debian Release: 5.0
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=cs_CZ.ISO-8859-2 (charmap=ISO-8859-2)
Shell: /bin/sh linked to /bin/bash

Versions of packages xserver-xorg-core depends on:
ii  libc6       2.7-18                       GNU C Library: Shared libraries
ii  libdbus-1-3 1.2.1-5                      simple interprocess messaging syst
ii  libdrm2     2.4.3+git+20090105+a8c5480-1 Userspace interface to kernel rend
ii  libfontenc1 1:1.0.4-3                    X11 font encoding library
ii  libhal1     0.5.11-8                     Hardware Abstraction Layer - share
ii  libpciacces 0.10.5-1                     Generic PCI access library for X
ii  libpixman-1 0.13.2-1                     pixel-manipulation library for X a
ii  libssl0.9.8 0.9.8g-15                    SSL shared libraries
ii  libxau6     1:1.0.4-1                    X11 authorisation library
ii  libxdmcp6   1:1.0.2-3                    X11 Display Manager Control Protoc
ii  libxfont1   1:1.3.4-1                    X11 font rasterisation library
ii  xserver-com 2:1.5.99.901-2               common files used by various X ser
ii  xserver-xor 1:7.4~5                      the X.Org X server

Versions of packages xserver-xorg-core recommends:
ii  libgl1-mesa-dri               7.3~rc3-1  A free implementation of the OpenG
ii  xfonts-base                   1:1.0.0-5  standard fonts for X
ii  xkb-data                      1.4-1      X Keyboard Extension (XKB) configu

Versions of packages xserver-xorg-core suggests:
ii  xfonts-100dpi                 1:1.0.0-4  100 dpi fonts for X
ii  xfonts-75dpi                  1:1.0.0-4  75 dpi fonts for X
ii  xfonts-scalable               1:1.0.0-6  scalable fonts for X

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to