Package: foomatic-db-gutenprint Version: 5.2.3-2 Severity: normal
I have upgraded cups/foomatic to latest in unstable, however if I try printing the CUPS testpage, there is about a 2cm empty space at the bottom, and if I measure the "inch markers" then 1 inch results in 1.9cm when measured (~0.74 inch). When I print a document, this problem is very obvious, since the document apears cut at on edge, and starting ~2cm off. This is particularly obvious when printing landscape. After downgrading cups/foomatic to lenny, the testpage is printed correctly (covers entire area of page). I used the following command to downgrade: sudo aptitude install cups-bsd/stable cups-client/stable cups-common/stable cupsddk/stable cupsddk-drivers/stable cups-driver-gutenprint/stable cups-pdf/stable foomatic-db/stable foomatic-db-engine/stable foomatic-db-gutenprint/stable foomatic-db-hpij/stable foomatic-filters/stable foomatic-filter-ppd/stable foomatic-gui/stable libcups2/stable libcupsimage2/stable libcupsys2/stable libgnomecups1.0-1/stable libgutenprint2/stable Printer details: Description: Samsung ML-2010 Location: Local Printer Printer Driver: Samsung ML-2010 Foomatic/gdi (recommended) Printer State: idle, accepting jobs, published. Device URI: hal:///org/freedesktop/Hal/devices/usb_device_4e8_326c_3T21BKCL402412V__if0_printer_noserial Not sure which package this bug belongs to (foomatic or cups). -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.28.3 (SMP w/4 CPU cores; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
