Package: kvm
Version: 84+dfsg-2
Severity: normal

Hello,

Testing kvm84 from experimental (I use libvirt) I have problems with my
bridged network.

With kvm 72+dfsg-5 everything is fine, I can ping host from the guest
and vice-versa.

Just upgrading kvm to version 84 makes it not working:


--8<---------------cut here---------------start------------->8---
d...@host: ~$ dmesg
[...]
[ 1402.084830] device nfs entered promiscuous mode
[ 1402.085292] virbr0: topology change detected, propagating
[ 1402.085294] virbr0: port 1(nfs) entering forwarding state
[ 1402.119980] kvm: 5000: cpu0 unhandled wrmsr: 0xc0010117 data 0
[ 1402.129303] kvm: 5000: cpu0 unhandled rdmsr: 0xc0010117
[ 1402.129325] kvm: 5000: cpu0 unhandled rdmsr: 0xc0010117
[ 1410.090645] bad partial csum: csum=21586/20992 len=80
[ 1411.546680] bad partial csum: csum=21586/20992 len=60
[ 1413.023197] nfs: no IPv6 routers present
[ 1414.918662] bad partial csum: csum=21586/20992 len=80
[ 1415.546653] bad partial csum: csum=21586/20992 len=60
[ 1419.546659] bad partial csum: csum=21586/20992 len=60
--8<---------------cut here---------------end--------------->8---

When I ping the guest from the host here is what tcpdump in the guest show:
--8<---------------cut here---------------start------------->8---
21:10:50.660488 00:00:00:00:ff:ff (oui Ethernet) > 00:00:00:00:00:00 (oui 
Ethernet), ethertype Unknown (0xffff), length 52: 
        0x0000:  ffff 063a 33fc 73d6 0806 0001 0800 0604  ...:3.s.........
        0x0010:  0001 063a 33fc 73d6 c0a8 7a01 0000 0000  ...:3.s...z.....
        0x0020:  0000 c0a8 7a04                           ....z.
--8<---------------cut here---------------end--------------->8---

Some informations:

--8<---------------cut here---------------start------------->8---
d...@host: ~$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP 
qlen 1000
    link/ether 00:1b:fc:d8:2c:02 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.2/24 brd 192.168.1.255 scope global eth0
    inet6 fe80::21b:fcff:fed8:2c02/64 scope link 
       valid_lft forever preferred_lft forever
3: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state 
UNKNOWN 
    link/ether fe:83:cb:6b:81:ea brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
    inet6 fe80::a42a:c0ff:fe25:b1b0/64 scope link 
       valid_lft forever preferred_lft forever
10: nfs: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state 
UNKNOWN qlen 500
    link/ether fe:83:cb:6b:81:ea brd ff:ff:ff:ff:ff:ff
    inet6 fe80::fc83:cbff:fe6b:81ea/64 scope link 
       valid_lft forever preferred_lft forever
--8<---------------cut here---------------end--------------->8---

--8<---------------cut here---------------start------------->8---
d...@guest: ~$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state 
UNKNOWN qlen 1000
    link/ether 52:54:00:52:a5:e0 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.4/24 brd 192.168.122.255 scope global eth0
    inet6 fe80::5054:ff:fe52:a5e0/64 scope link 
       valid_lft forever preferred_lft forever
--8<---------------cut here---------------end--------------->8---


Regards.

-- Package-specific info:


selected information from lshal(1):



/proc/cpuinfo:

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz
stepping        : 11
cpu MHz         : 2664.000
cache size      : 4096 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov 
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm 
constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl vmx smx 
est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow vnmi flexpriority
bogomips        : 5345.80
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz
stepping        : 11
cpu MHz         : 2664.000
cache size      : 4096 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
apicid          : 1
initial apicid  : 1
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov 
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm 
constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl vmx smx 
est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow vnmi flexpriority
bogomips        : 7127.17
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:




-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (90, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.29.1+hati.2 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages kvm depends on:
ii  adduser                3.110             add and remove users and groups
ii  bridge-utils           1.4-5             Utilities for configuring the Linu
ii  iproute                20090324-1        networking and traffic control too
ii  libasound2             1.0.19-1          shared library for ALSA applicatio
ii  libbluetooth2          3.36-1            Library to use the BlueZ Linux Blu
ii  libbrlapi0.5           3.10~r3724-1.1    braille display access via BRLTTY 
ii  libc6                  2.9-7             GNU C Library: Shared libraries
ii  libgnutls26            2.6.5-1           the GNU TLS library - runtime libr
ii  libncurses5            5.7+20090404-1    shared libraries for terminal hand
ii  libpulse0              0.9.15-1          PulseAudio client libraries
ii  libsdl1.2debian        1.2.13-4+b1       Simple DirectMedia Layer
ii  libvdeplug2            2.2.2-3           Virtual Distributed Ethernet - Plu
ii  python                 2.5.4-2           An interactive high-level object-o
ii  zlib1g                 1:1.2.3.3.dfsg-13 compression library - runtime

Versions of packages kvm recommends:
ii  linux-image-2.6.28.1+hati.1 [ 1          Linux kernel binary image for vers
ii  linux-image-2.6.29.1+hati.2 [ hati.2     Linux kernel binary image for vers

Versions of packages kvm suggests:
ii  debootstrap  1.0.13                      Bootstrap a basic Debian system
ii  hal          0.5.12~git20090406.46dc48-2 Hardware Abstraction Layer
pn  kvm-source   <none>                      (no description available)
pn  samba        <none>                      (no description available)
pn  vde2         <none>                      (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to