Package: linux-image-2.6-amd64 Version: 2.6.26+17+lenny1 Severity: normal
I created a raid5 md (/dev/md1) device of 16x1TB SATA disks. When I look at /proc/mdstat i see this: --- Personalities : [raid10] [raid6] [raid5] [raid4] md1 : active raid5 sdo1[15] sdy1[14] sdx1[13] sdw1[12] sdv1[11] sdu1[10] sdt1[9] sds1[8] sdr1[7] sdq1[6] sdp1[5] sdn1[4] sdm1[3] sdl1[2] sdk1[1] sdj1[0] 14651399040 blocks level 5, 128k chunk, algorithm 2 [16/16] [UUUUUUUUUUUUUUUU] [==>..................] resync = 13.4% (131128536/976759936) finish=202.0min speed=69742K/sec md0 : active raid10 sdb1[0] sdi1[7] sdh1[6] sdg1[5] sdf1[4] sde1[3] sdd1[2] sdc1[1] 1757349888 blocks 64K chunks 2 near-copies [8/8] [UUUUUUUU] unused devices: <none> --- The speed is around 70Mb/s the whole time and the finish time starts at about 210 minutes. But if I calculate this right: 16 disks raid5 = 15TB netto 15TB/210 min = 71GB/min = 1,19 GB/s Kind regards, Caspar Smit -- System Information: Debian Release: 5.0.2 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6-amd64 depends on: ii linux-image-2.6.26-2-amd64 2.6.26-17 Linux 2.6.26 image on AMD64 linux-image-2.6-amd64 recommends no packages. linux-image-2.6-amd64 suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org