Package: linux-image-2.6.30-1-686 Version: 2.6.30-2 Severity: minor *** Please type your report below this line ***
fit-pc2 is a small Intel-Atomm-based computer. See: http://fit-pc2.com/wiki/index.php?title=Fit-PC2_Specifications The system hangs on reboot. A workaround is to use 'reboot=b' in the kernel command-line. Upstream suggests a patch to automate that: http://www.fit-pc2.com/forum/viewtopic.php?f=9&t=301 Is such a patch (using CONFIG_X86_REBOOTFIXUPS=yes) acceptable? Any other specific information on the system that you need? -- Package-specific info: ** Version: Linux version 2.6.30-1-686 (Debian 2.6.30-2) (wa...@debian.org) (gcc version 4.3.3 (Debian 4.3.3-13) ) #1 SMP Wed Jul 8 14:39:46 UTC 2009 ** Command line: root=/dev/sda7 ro quiet reboot=b ** Not tainted ** Kernel log: [ 2.427526] usbhid: v2.6:USB HID core driver [ 2.436279] sda9 sda10 > [ 2.472685] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.443191] kjournald starting. Commit interval 5 seconds [ 3.443225] EXT3-fs: mounted filesystem with ordered data mode. [ 4.691051] udev: starting version 141 [ 4.896102] ACPI: AC Adapter [ADP1] (on-line) [ 4.916841] ACPI: SSDT 3f6b80ca 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) [ 4.917623] ACPI: SSDT 3f6b7a06 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624) [ 4.919848] Monitor-Mwait will be used to enter C-1 state [ 4.920854] Monitor-Mwait will be used to enter C-2 state [ 4.936808] Monitor-Mwait will be used to enter C-3 state [ 4.937557] ACPI: Battery Slot [BAT0] (battery present) [ 4.937914] ACPI: Battery Slot [BAT1] (battery absent) [ 4.938122] ACPI: Battery Slot [BAT2] (battery absent) [ 4.956253] Monitor-Mwait will be used to enter C-3 state [ 4.956297] Marking TSC unstable due to TSC halts in idle [ 4.956529] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 4.956640] processor ACPI_CPU:00: registered as cooling_device1 [ 4.956662] ACPI: Processor [CPU0] (supports 8 throttling states) [ 4.956897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.956916] ACPI: Power Button [PWRF] [ 4.956933] ACPI Error (evxfevnt-0193): Could not enable PowerButton event [20090320] [ 4.956948] ACPI Warning (evxface-0146): Could not enable fixed event 2 [20090320] [ 4.968288] button: probe of LNXPWRBN:00 failed with error -22 [ 4.968518] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 4.968681] ACPI: Lid Switch [LID0] [ 4.968909] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 4.968928] ACPI: Power Button [PWRB] [ 4.970859] ACPI: SSDT 3f6b830f 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624) [ 4.971547] ACPI: SSDT 3f6b8045 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624) [ 4.977186] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 4.977303] processor ACPI_CPU:01: registered as cooling_device2 [ 4.977321] ACPI: Processor [CPU1] (supports 8 throttling states) [ 5.333088] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 5.486290] Error: Driver 'pcspkr' is already registered, aborting... [ 5.771124] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.771208] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.904005] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 6.000229] Clocksource tsc unstable (delta = -75541890 ns) [ 7.099673] Adding 1984016k swap on /dev/sda2. Priority:-1 extents:1 across:1984016k [ 7.223134] EXT3 FS on sda7, internal journal [ 8.706792] kjournald starting. Commit interval 5 seconds [ 8.707542] EXT3 FS on sda5, internal journal [ 8.707568] EXT3-fs: mounted filesystem with ordered data mode. [ 113.083300] r8169: eth0: link up [ 113.083311] r8169: eth0: link up [ 123.288207] eth0: no IPv6 routers present [ 460.952311] usb 3-2: USB disconnect, address 2 [ 627.768272] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 627.936503] usb 3-2: New USB device found, idVendor=04d9, idProduct=1400 [ 627.936521] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 627.936837] usb 3-2: configuration #1 chosen from 1 choice [ 627.959686] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input8 [ 627.959932] generic-usb 0003:04D9:1400.0003: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.1-2/input0 [ 627.994406] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input9 [ 627.994683] generic-usb 0003:04D9:1400.0004: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.1-2/input1 [ 628.600310] usb 3-2: USB disconnect, address 3 [ 629.608273] usb 3-2: new low speed USB device using uhci_hcd and address 4 [ 629.672309] hub 3-0:1.0: unable to enumerate USB device on port 2 [ 630.096271] usb 3-2: new low speed USB device using uhci_hcd and address 5 [ 630.247482] usb 3-2: device descriptor read/all, error -71 [ 630.304312] hub 3-0:1.0: unable to enumerate USB device on port 2 [ 632.808274] usb 3-2: new low speed USB device using uhci_hcd and address 7 [ 632.976504] usb 3-2: New USB device found, idVendor=04d9, idProduct=1400 [ 632.976521] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 632.976821] usb 3-2: configuration #1 chosen from 1 choice [ 632.999677] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input10 [ 632.999923] generic-usb 0003:04D9:1400.0005: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.1-2/input0 [ 633.033183] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input11 [ 633.033455] generic-usb 0003:04D9:1400.0006: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.1-2/input1 [ 635.048310] usb 3-2: USB disconnect, address 7 [ 636.528274] usb 3-2: new low speed USB device using uhci_hcd and address 8 [ 636.592313] hub 3-0:1.0: unable to enumerate USB device on port 2 [ 637.272272] usb 3-2: new low speed USB device using uhci_hcd and address 9 [ 637.440512] usb 3-2: New USB device found, idVendor=04d9, idProduct=1400 [ 637.440530] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 637.440824] usb 3-2: configuration #1 chosen from 1 choice [ 637.463769] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input12 [ 637.464069] generic-usb 0003:04D9:1400.0007: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.1-2/input0 [ 637.497179] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input13 [ 637.497472] generic-usb 0003:04D9:1400.0008: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.1-2/input1 [ 642.984312] usb 3-2: USB disconnect, address 9 [ 643.300270] usb 3-2: new low speed USB device using uhci_hcd and address 10 [ 643.468506] usb 3-2: New USB device found, idVendor=04d9, idProduct=1400 [ 643.468524] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 643.468814] usb 3-2: configuration #1 chosen from 1 choice [ 643.491575] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input14 [ 643.491859] generic-usb 0003:04D9:1400.0009: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.1-2/input0 [ 643.525159] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input15 [ 643.525359] generic-usb 0003:04D9:1400.000A: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.1-2/input1 [ 643.728306] usb 3-2: USB disconnect, address 10 [ 644.592273] usb 3-2: new low speed USB device using uhci_hcd and address 11 [ 644.760505] usb 3-2: New USB device found, idVendor=04d9, idProduct=1400 [ 644.760523] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 644.760819] usb 3-2: configuration #1 chosen from 1 choice [ 644.783709] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input16 [ 644.783957] generic-usb 0003:04D9:1400.000B: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.1-2/input0 [ 644.818683] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input17 [ 644.818977] generic-usb 0003:04D9:1400.000C: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.1-2/input1 ** Loaded modules: Module Size Used by snd_hda_codec_realtek 178316 1 snd_hda_intel 22192 0 snd_hda_codec 63508 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 6104 1 snd_hda_codec serio_raw 4556 0 snd_pcm 62368 2 snd_hda_intel,snd_hda_codec snd_timer 17436 1 snd_pcm i2c_isch 3804 0 pcspkr 2104 0 snd 49024 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 6184 1 snd i2c_core 20828 1 i2c_isch snd_page_alloc 8152 2 snd_hda_intel,snd_pcm psmouse 37512 0 evdev 8028 0 battery 6012 0 button 5060 0 processor 34448 2 ac 2960 0 ext3 107016 2 jbd 40952 1 ext3 mbcache 6924 1 ext3 usbhid 31500 0 hid 34484 1 usbhid sd_mod 28720 4 crc_t10dif 1632 1 sd_mod ata_generic 4340 0 ide_pci_generic 3632 0 ide_core 87980 1 ide_pci_generic pata_sch 3184 3 libata 150488 2 ata_generic,pata_sch uhci_hcd 19108 0 r8169 27696 0 mii 4664 1 r8169 sdhci_pci 6524 0 sdhci 14836 1 sdhci_pci mmc_core 46092 1 sdhci ehci_hcd 29548 0 scsi_mod 131496 2 sd_mod,libata led_class 3852 1 sdhci usbcore 125760 4 usbhid,uhci_hcd,ehci_hcd video 17972 0 output 2604 1 video thermal 12580 0 fan 4040 0 thermal_sys 13128 4 processor,video,thermal,fan ** PCI devices: not available -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.30-1-686 depends on: ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy ii initramfs-tools [linux-initra 0.93.3 tools for generating an initramfs ii module-init-tools 3.9-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.30-1-686 recommends: ii libc6-i686 2.9-19 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.30-1-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.30 <none> (no description available) -- debconf information: linux-image-2.6.30-1-686/preinst/elilo-initrd-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/lilo-has-ramdisk: shared/kernel-image/really-run-bootloader: true linux-image-2.6.30-1-686/postinst/bootloader-test-error-2.6.30-1-686: linux-image-2.6.30-1-686/preinst/abort-install-2.6.30-1-686: * linux-image-2.6.30-1-686/preinst/bootloader-initrd-2.6.30-1-686: false linux-image-2.6.30-1-686/postinst/depmod-error-initrd-2.6.30-1-686: false linux-image-2.6.30-1-686/postinst/bootloader-error-2.6.30-1-686: linux-image-2.6.30-1-686/prerm/would-invalidate-boot-loader-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/initrd-2.6.30-1-686: linux-image-2.6.30-1-686/postinst/old-initrd-link-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/overwriting-modules-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/lilo-initrd-2.6.30-1-686: true linux-image-2.6.30-1-686/prerm/removing-running-kernel-2.6.30-1-686: true * linux-image-2.6.30-1-686/postinst/create-kimage-link-2.6.30-1-686: false linux-image-2.6.30-1-686/postinst/kimage-is-a-directory: linux-image-2.6.30-1-686/postinst/depmod-error-2.6.30-1-686: false linux-image-2.6.30-1-686/postinst/old-system-map-link-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/old-dir-initrd-link-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/abort-overwrite-2.6.30-1-686: linux-image-2.6.30-1-686/preinst/failed-to-move-modules-2.6.30-1-686: -- Tzafrir Cohen | tzaf...@jabber.org | VIM is http://tzafrir.org.il | | a Mutt's tzaf...@cohens.org.il | | best ICQ# 16849754 | | friend -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org