El mar, 06-10-2009 a las 03:54 +0100, Ben Hutchings escribió: > On Mon, 2009-10-05 at 08:58 +0200, Daniel Rodríguez wrote: > > Is done, here is the log. > > Thanks. Unfortunately the X server log doesn't show much information > about what went wrong. I will also need to see the kernel boot messages > (starting from time 0). If you booted recently then dmesg will show > them; otherwise they should be in /var/log/messages. > > Ben. >
Here is the output of dmesg just after boot.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-19) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 22:33:18 UTC 2009 [ 0.000000] Command line: root=/dev/mapper/hosaka-root ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a800 (usable) [ 0.000000] BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 154) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524272) 1 entries of 3200 used [ 0.000000] max_pfn_mapped = 1048576 [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F69F0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 7FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: FACP 7FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: DSDT 7FFF30C0, 4AC4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7FFF0000, 0040 [ 0.000000] ACPI: APIC 7FFF7BC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fff0000 [ 0.000000] Entering add_active_range(0, 0, 154) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524272) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff] [ 0.000000] bootmap [0000000000011000 - 0000000000020fff] pages 10 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS [ 0.000000] early res: 3 [378bb000-37fef5af] RAMDISK [ 0.000000] early res: 4 [9a800-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-bfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 154 [ 0.000000] 0: 256 -> 524272 [ 0.000000] On node 0 totalpages: 524170 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1251 pages reserved [ 0.000000] DMA zone: 2687 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513064 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515751 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/hosaka-root ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000000] time.c: Detected 2009.775 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] Node 0: aperture @ f0000000 size 32 MB [ 0.004000] Aperture too small (32 MB) [ 0.004000] AGP bridge at 00:00:00 [ 0.004000] Aperture from AGP @ f0000000 size 4096 MB (APSIZE 0) [ 0.004000] Aperture too small (0 MB) [ 0.004000] Your BIOS doesn't leave a aperture memory hole [ 0.004000] Please enable the IOMMU option in the BIOS setup [ 0.004000] This costs you 64 MB of RAM [ 0.004000] Mapping aperture over 65536 KB of RAM @ 4000000 [ 0.004000] PM: Registered nosave memory: 0000000004000000 - 0000000008000000 [ 0.004000] Memory: 1990244k/2097088k available (2228k kernel code, 106436k reserved, 1081k data, 392k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084102] Calibrating delay using timer specific routine.. 4022.44 BogoMIPS (lpj=8044890) [ 0.084226] Security Framework initialized [ 0.084265] SELinux: Disabled at boot. [ 0.084302] Capability LSM initialized [ 0.084582] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.085965] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.086648] Mount-cache hash table entries: 256 [ 0.086862] Initializing cgroup subsys ns [ 0.086899] Initializing cgroup subsys cpuacct [ 0.086936] Initializing cgroup subsys devices [ 0.086991] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.087030] CPU: L2 Cache: 512K (64 bytes/line) [ 0.087066] CPU 0/0 -> Node 0 [ 0.087111] CPU: Physical Processor ID: 0 [ 0.087146] CPU: Processor Core ID: 0 [ 0.087926] ACPI: Core revision 20080321 [ 0.140028] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.140116] Using local APIC timer interrupts. [ 0.148009] APIC timer calibration result 12561084 [ 0.148009] Detected 12.561 MHz APIC timer. [ 0.148009] Booting processor 1/1 ip 6000 [ 0.156009] Initializing CPU#1 [ 0.156009] Calibrating delay using timer specific routine.. 4019.59 BogoMIPS (lpj=8039199) [ 0.156009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.156009] CPU: L2 Cache: 512K (64 bytes/line) [ 0.156009] CPU 1/1 -> Node 0 [ 0.156009] CPU: Physical Processor ID: 0 [ 0.156009] CPU: Processor Core ID: 1 [ 0.235966] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.236014] Brought up 2 CPUs [ 0.236014] Total of 2 processors activated (8042.04 BogoMIPS). [ 0.236014] CPU0 attaching sched-domain: [ 0.236014] domain 0: span 0-1 [ 0.236014] groups: 0 1 [ 0.236014] domain 1: span 0-1 [ 0.236014] groups: 0-1 [ 0.236014] CPU1 attaching sched-domain: [ 0.236014] domain 0: span 0-1 [ 0.236014] groups: 1 0 [ 0.236014] domain 1: span 0-1 [ 0.236014] groups: 0-1 [ 0.236014] net_namespace: 1224 bytes [ 0.236014] Booting paravirtualized kernel on bare hardware [ 0.236014] NET: Registered protocol family 16 [ 0.236014] node 0 link 0: io port [1000, fffff] [ 0.236014] TOM: 0000000080000000 aka 2048M [ 0.236014] node 0 link 0: mmio [a0000, bffff] [ 0.236014] node 0 link 0: mmio [80000000, ff70ffff] [ 0.236014] bus: [00,ff] on node 0 link 0 [ 0.236014] bus: 00 index 0 io port: [0, ffff] [ 0.236014] bus: 00 index 1 mmio: [a0000, bffff] [ 0.236014] bus: 00 index 2 mmio: [80000000, fcffffffff] [ 0.236014] ACPI: bus type pci registered [ 0.236014] PCI: Using configuration type 1 for base access [ 0.236014] ACPI: EC: Look up EC in DSDT [ 0.240015] ACPI Error (dsobject-0501): Package List length (6) larger than NumElements count (2), truncated [ 0.240015] [20080321] [ 0.240141] ACPI Error (dsobject-0501): Package List length (6) larger than NumElements count (2), truncated [ 0.240213] [20080321] [ 0.244176] ACPI: Interpreter enabled [ 0.244213] ACPI: (supports S0 S3 S4 S5) [ 0.244355] ACPI: Using IOAPIC for interrupt routing [ 0.256016] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.256016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.256016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.256016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.312019] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.312019] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.313244] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.313809] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.314325] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.314842] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.315360] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.315876] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.316440] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.317006] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.317571] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.318136] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.318653] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.319169] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.319732] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.320299] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.320726] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.321303] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.321853] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.322195] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.322512] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.322853] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.323114] ACPI: PCI Interrupt Link [APC5] (IRQs *16) [ 0.323415] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 0.323784] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 0.324151] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. [ 0.324543] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [ 0.324939] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. [ 0.325331] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 0.325665] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 0.329290] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 0.329658] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 0.330050] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 0.330442] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.330843] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled. [ 0.331244] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0 [ 0.332727] ACPI: Power Resource [ISAV] (on) [ 0.332727] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.332727] pnp: PnP ACPI init [ 0.332727] ACPI: bus type pnp registered [ 0.332727] pnp 00:00: parse allocated resources [ 0.332727] pnp 00:00: add io 0x1000-0x107f flags 0x1 [ 0.332727] pnp 00:00: add io 0x1080-0x10ff flags 0x1 [ 0.332727] pnp 00:00: add io 0x1400-0x147f flags 0x1 [ 0.332727] pnp 00:00: add io 0x1480-0x14ff flags 0x1 [ 0.332727] pnp 00:00: add io 0x1800-0x187f flags 0x1 [ 0.332727] pnp 00:00: add io 0x1880-0x18ff flags 0x1 [ 0.332727] pnp 00:00: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.332727] pnp 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.332727] pnp 00:01: parse allocated resources [ 0.332727] pnp 00:01: add mem 0xcd000-0xcffff flags 0x1 [ 0.332727] pnp 00:01: add mem 0xf0000-0xf7fff flags 0x1 [ 0.332727] pnp 00:01: add mem 0xf8000-0xfbfff flags 0x1 [ 0.332727] pnp 00:01: add mem 0xfc000-0xfffff flags 0x1 [ 0.332727] pnp 00:01: add mem 0x7fff0000-0x7fffffff flags 0x1 [ 0.332727] pnp 00:01: add mem 0xffff0000-0xffffffff flags 0x1 [ 0.332727] pnp 00:01: add mem 0x0-0x9ffff flags 0x1 [ 0.332727] pnp 00:01: add mem 0x100000-0x7ffeffff flags 0x1 [ 0.332727] pnp 00:01: add mem 0xfec00000-0xfec00fff flags 0x1 [ 0.332727] pnp 00:01: add mem 0xfee00000-0xfee00fff flags 0x1 [ 0.332727] pnp 00:01: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c [ 0.332727] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.332727] pnp 00:02: parse allocated resources [ 0.332727] pnp 00:02: add io 0xcf8-0xcff flags 0x1 [ 0.332727] pnp 00:02: add io 0xcf0-0xcf3 flags 0x1 [ 0.332727] pnp 00:02: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.334413] pnp 00:03: parse allocated resources [ 0.334421] pnp 00:03: add io 0x10-0x1f flags 0x1 [ 0.334423] pnp 00:03: add io 0x22-0x3f flags 0x1 [ 0.334426] pnp 00:03: add io 0x44-0x5f flags 0x1 [ 0.334428] pnp 00:03: add io 0x62-0x63 flags 0x1 [ 0.334431] pnp 00:03: add io 0x65-0x6f flags 0x1 [ 0.334433] pnp 00:03: add io 0x74-0x7f flags 0x1 [ 0.334436] pnp 00:03: add io 0x91-0x93 flags 0x1 [ 0.334438] pnp 00:03: add io 0xa2-0xbf flags 0x1 [ 0.334440] pnp 00:03: add io 0xe0-0xef flags 0x1 [ 0.334443] pnp 00:03: add io 0x4d0-0x4d1 flags 0x1 [ 0.334445] pnp 00:03: add io 0x800-0x805 flags 0x1 [ 0.334448] pnp 00:03: add io 0x290-0x297 flags 0x1 [ 0.334451] pnp 00:03: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.334641] pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.334659] pnp 00:04: parse allocated resources [ 0.334666] pnp 00:04: add dma 4 flags 0x4 [ 0.334668] pnp 00:04: add io 0x0-0xf flags 0x1 [ 0.334670] pnp 00:04: add io 0x80-0x90 flags 0x1 [ 0.334673] pnp 00:04: add io 0x94-0x9f flags 0x1 [ 0.334675] pnp 00:04: add io 0xc0-0xdf flags 0x1 [ 0.334845] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.334861] pnp 00:05: parse allocated resources [ 0.334866] pnp 00:05: add io 0x70-0x73 flags 0x1 [ 0.334874] pnp 00:05: add irq 8 flags 0x1 [ 0.335045] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.335060] pnp 00:06: parse allocated resources [ 0.335065] pnp 00:06: add io 0x61-0x61 flags 0x1 [ 0.335239] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.335254] pnp 00:07: parse allocated resources [ 0.335259] pnp 00:07: add io 0xf0-0xff flags 0x1 [ 0.335263] pnp 00:07: add irq 13 flags 0x1 [ 0.335436] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.335607] pnp 00:08: parse allocated resources [ 0.335784] pnp 00:08: add io 0x3f0-0x3f5 flags 0x1 [ 0.335787] pnp 00:08: add io 0x3f7-0x3f7 flags 0x1 [ 0.335791] pnp 00:08: add irq 6 flags 0x1 [ 0.335793] pnp 00:08: add dma 2 flags 0x0 [ 0.335795] pnp 00:08: parse resource options [ 0.335797] pnp 00:08: new independent option [ 0.335803] pnp 00:08: new dependent option (priority 0x1) [ 0.335806] pnp 00:08: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1 [ 0.335809] pnp 00:08: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1 [ 0.335815] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1 [ 0.335818] pnp 00:08: dma bitmask 0x4 flags 0x0 [ 0.335820] pnp 00:08: end dependent options [ 0.335994] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.336727] pnp 00:09: parse allocated resources [ 0.336727] pnp 00:09: add irq 12 flags 0x1 [ 0.336727] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.336727] pnp 00:0a: parse allocated resources [ 0.336727] pnp 00:0a: add io 0x60-0x60 flags 0x1 [ 0.336727] pnp 00:0a: add io 0x64-0x64 flags 0x1 [ 0.336727] pnp 00:0a: add irq 1 flags 0x1 [ 0.336727] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.336727] pnp: PnP ACPI: found 11 devices [ 0.336727] ACPI: ACPI bus type pnp unregistered [ 0.340727] usbcore: registered new interface driver usbfs [ 0.340727] usbcore: registered new interface driver hub [ 0.340727] usbcore: registered new device driver usb [ 0.340727] PCI: Using ACPI for IRQ routing [ 0.355888] agpgart: Detected AGP bridge 0 [ 0.355926] agpgart: Aperture pointing to RAM [ 0.359822] agpgart: Aperture from AGP @ f0000000 size 4096 MB [ 0.359859] agpgart: Aperture too small (0 MB) [ 0.359894] agpgart: No usable aperture found. [ 0.359930] agpgart: Consider rebooting with iommu=memaper=2 to get a good aperture. [ 0.360328] ACPI: RTC can wake from S4 [ 0.375917] pnp: the driver 'system' has been registered [ 0.375929] system 00:00: ioport range 0x1000-0x107f has been reserved [ 0.375968] system 00:00: ioport range 0x1080-0x10ff has been reserved [ 0.376006] system 00:00: ioport range 0x1400-0x147f has been reserved [ 0.376058] system 00:00: ioport range 0x1480-0x14ff has been reserved [ 0.376097] system 00:00: ioport range 0x1800-0x187f has been reserved [ 0.376135] system 00:00: ioport range 0x1880-0x18ff has been reserved [ 0.376174] system 00:00: driver attached [ 0.376182] system 00:01: iomem range 0xcd000-0xcffff has been reserved [ 0.376221] system 00:01: iomem range 0xf0000-0xf7fff could not be reserved [ 0.376259] system 00:01: iomem range 0xf8000-0xfbfff could not be reserved [ 0.376298] system 00:01: iomem range 0xfc000-0xfffff could not be reserved [ 0.376336] system 00:01: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.376382] system 00:01: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.376428] system 00:01: iomem range 0x0-0x9ffff could not be reserved [ 0.376466] system 00:01: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.376512] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.376558] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.376603] system 00:01: driver attached [ 0.376611] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.376627] system 00:03: ioport range 0x800-0x805 has been reserved [ 0.376627] system 00:03: ioport range 0x290-0x297 has been reserved [ 0.376627] system 00:03: driver attached [ 0.376627] PCI: Bridge: 0000:00:0b.0 [ 0.376627] IO window: a000-afff [ 0.376627] MEM window: 0xf2000000-0xf3ffffff [ 0.376627] PREFETCH window: 0x00000000e0000000-0x00000000efffffff [ 0.376627] PCI: Bridge: 0000:00:0e.0 [ 0.376627] IO window: b000-bfff [ 0.376627] MEM window: 0xf4000000-0xf5ffffff [ 0.376627] PREFETCH window: 0x0000000088000000-0x00000000880fffff [ 0.376627] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.376627] NET: Registered protocol family 2 [ 0.378896] Switched to high resolution mode on CPU 0 [ 0.379401] Switched to high resolution mode on CPU 1 [ 0.410968] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.412208] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.412763] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.413435] TCP: Hash tables configured (established 262144 bind 65536) [ 0.413476] TCP reno registered [ 0.425142] NET: Registered protocol family 1 [ 0.425289] checking if image is initramfs... it is [ 0.963937] Freeing initrd memory: 7377k freed [ 0.969580] audit: initializing netlink socket (disabled) [ 0.969608] type=2000 audit(1254821259.964:1): initialized [ 0.973589] Total HugeTLB memory allocated, 0 [ 0.973589] VFS: Disk quotas dquot_6.5.1 [ 0.973589] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.973589] msgmni has been set to 3901 [ 0.973589] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.973589] io scheduler noop registered [ 0.973589] io scheduler anticipatory registered [ 0.973589] io scheduler deadline registered [ 0.973589] io scheduler cfq registered (default) [ 1.003186] pci 0000:01:00.0: Boot video device [ 1.006866] Linux agpgart interface v0.103 [ 1.006906] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.007292] pnp: the driver 'serial' has been registered [ 1.009072] brd: module loaded [ 1.009198] input: Macintosh mouse button emulation as /class/input/input0 [ 1.009347] pnp: the driver 'i8042 kbd' has been registered [ 1.009363] i8042 kbd 00:0a: driver attached [ 1.009401] pnp: the driver 'i8042 aux' has been registered [ 1.009416] i8042 aux 00:09: driver attached [ 1.009456] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.012218] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.012259] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.042767] mice: PS/2 mouse device common for all mice [ 1.042767] pnp: the driver 'rtc_cmos' has been registered [ 1.042767] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.042767] rtc0: alarms up to one year, y3k [ 1.042767] rtc_cmos 00:05: driver attached [ 1.042767] cpuidle: using governor ladder [ 1.042767] cpuidle: using governor menu [ 1.042767] No iBFT detected. [ 1.042767] TCP cubic registered [ 1.042767] NET: Registered protocol family 17 [ 1.042767] registered taskstats version 1 [ 1.042767] rtc_cmos 00:05: setting system clock to 2009-10-06 09:27:41 UTC (1254821261) [ 1.042767] Freeing unused kernel memory: 392k freed [ 1.062402] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1.146103] ACPI: ACPI0007:00 is registered as cooling_device0 [ 1.146103] ACPI: ACPI0007:01 is registered as cooling_device1 [ 1.502713] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.503062] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 1.503106] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 22 [ 1.503210] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 1.503214] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.503397] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 1.503459] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf6002000 [ 1.525962] No dock devices found. [ 1.541963] SCSI subsystem initialized [ 1.560489] usb usb1: configuration #1 chosen from 1 choice [ 1.560489] hub 1-0:1.0: USB hub found [ 1.560489] hub 1-0:1.0: 4 ports detected [ 1.584492] libata version 3.00 loaded. [ 1.665493] Floppy drive(s): fd0 is 1.44M [ 1.666531] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.666574] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.666619] usb usb1: Product: OHCI Host Controller [ 1.666655] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd [ 1.666692] usb usb1: SerialNumber: 0000:00:02.0 [ 1.669138] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 [ 1.669181] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 21 [ 1.669290] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 1.669293] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 1.669391] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 1.669453] ohci_hcd 0000:00:02.1: irq 21, io mem 0xf6003000 [ 1.683250] FDC 0 is a post-1991 82077 [ 1.727248] usb usb2: configuration #1 chosen from 1 choice [ 1.727248] hub 2-0:1.0: USB hub found [ 1.727248] hub 2-0:1.0: 4 ports detected [ 1.828588] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.828627] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.828672] usb usb2: Product: OHCI Host Controller [ 1.828708] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd [ 1.828744] usb usb2: SerialNumber: 0000:00:02.1 [ 1.831250] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 1.831250] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 20 [ 1.831250] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 1.831250] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 1.831250] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 1.831250] ehci_hcd 0000:00:02.2: debug port 1 [ 1.831250] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 1.831250] ehci_hcd 0000:00:02.2: irq 20, io mem 0xf6004000 [ 2.013469] usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 2.026458] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.026577] usb usb3: configuration #1 chosen from 1 choice [ 2.026646] hub 3-0:1.0: USB hub found [ 2.026688] hub 3-0:1.0: 8 ports detected [ 2.130464] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2.178498] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.178536] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.178581] usb usb3: Product: EHCI Host Controller [ 2.178617] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd [ 2.178654] usb usb3: SerialNumber: 0000:00:02.2 [ 2.178617] sata_nv 0000:00:0a.0: version 3.5 [ 2.178617] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 2.178617] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 22 [ 2.178617] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 2.178617] scsi0 : sata_nv [ 2.178617] scsi1 : sata_nv [ 2.178617] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 22 [ 2.178617] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 22 [ 2.869306] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.914381] ata1.00: HPA detected: current 488395055, native 488397168 [ 2.914381] ata1.00: ATA-7: ST3250824AS, 3.AAE, max UDMA/133 [ 2.914381] ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.981545] ata1.00: configured for UDMA/133 [ 3.083337] usb 3-8: new high speed USB device using ehci_hcd and address 3 [ 3.340438] usb 3-8: configuration #1 chosen from 1 choice [ 3.340642] usb 3-8: New USB device found, idVendor=1058, idProduct=1100 [ 3.340680] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.340718] usb 3-8: Product: My Book [ 3.340753] usb 3-8: Manufacturer: Western Digital [ 3.343401] usb 3-8: SerialNumber: 57442D574341553436363037313138 [ 3.631640] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.680723] ata2.00: ATA-7: ST3250824AS 41N3269 LEN, 3.AAH, max UDMA/133 [ 3.680723] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.702885] usb 1-2: new full speed USB device using ohci_hcd and address 3 [ 3.754937] ata2.00: configured for UDMA/133 [ 3.754937] isa bounce pool size: 16 pages [ 3.754937] scsi 0:0:0:0: Direct-Access ATA ST3250824AS 3.AA PQ: 0 ANSI: 5 [ 3.754937] scsi 1:0:0:0: Direct-Access ATA ST3250824AS 3.AA PQ: 0 ANSI: 5 [ 3.763817] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 3.763817] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 [ 3.763817] skge 1.13 addr 0xf5000000 irq 19 chip Yukon-Lite rev 9 [ 3.763817] skge eth0: addr 00:14:85:21:c6:f7 [ 3.826933] Uniform Multi-Platform E-IDE driver [ 3.826933] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.830930] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller [ 3.830930] NFORCE3-250: IDE controller (0x10de:0x00e5 rev 0xa2) at PCI slot 0000:00:08.0 [ 3.830930] NFORCE3-250: not 100% native mode: will probe irqs later [ 3.830930] NFORCE3-250: IDE port disabled [ 3.830930] ide0: BM-DMA at 0xf000-0xf007 [ 3.830930] Probing IDE interface ide0... [ 3.895794] Initializing USB Mass Storage driver... [ 3.970974] usb 1-2: configuration #1 chosen from 1 choice [ 3.985179] usb 1-2: New USB device found, idVendor=04e8, idProduct=3268 [ 3.985219] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.985257] usb 1-2: Product: Samsung ML-1610 Series [ 3.985293] usb 1-2: Manufacturer: Samsung Electronics Co., Ltd. [ 3.985329] usb 1-2: SerialNumber: 3921BRJL405382.. [ 3.999445] scsi2 : SCSI emulation for USB Mass Storage devices [ 4.002024] usbcore: registered new interface driver usb-storage [ 4.002024] USB Mass Storage support registered. [ 4.002024] usb-storage: device found at 3 [ 4.002024] usb-storage: waiting for device to settle before scanning [ 4.566109] hda: PLEXTOR DVDR PX-740A, ATAPI CD/DVD-ROM drive [ 5.251043] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 5.251510] hda: UDMA/33 mode selected [ 5.251867] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.270984] Driver 'sd' needs updating - please use bus_type methods [ 5.270984] sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB) [ 5.270984] sd 0:0:0:0: [sda] Write Protect is off [ 5.270984] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.270984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.270985] sd 0:0:0:0: [sda] 488395055 512-byte hardware sectors (250058 MB) [ 5.270985] sd 0:0:0:0: [sda] Write Protect is off [ 5.270985] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.270985] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.270985] sda:<6>hda: ATAPI sda1 sda2 < 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache [ 5.287063] Uniform CD-ROM driver Revision: 3.20 [ 5.287230] sda5 > [ 5.287230] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.287360] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 5.287416] sd 1:0:0:0: [sdb] Write Protect is off [ 5.287452] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.287482] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.287591] sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 5.287643] sd 1:0:0:0: [sdb] Write Protect is off [ 5.287679] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.287708] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.287761] sdb: sdb1 [ 5.311897] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.604699] device-mapper: uevent: version 1.0.3 [ 5.606161] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-de...@redhat.com [ 5.793746] PM: Starting manual resume from disk [ 5.821884] kjournald starting. Commit interval 5 seconds [ 5.821884] EXT3-fs: mounted filesystem with ordered data mode. [ 6.918492] udevd version 125 started [ 7.644216] input: Power Button (FF) as /class/input/input2 [ 7.701078] ACPI: Power Button (FF) [PWRF] [ 7.701198] input: Power Button (CM) as /class/input/input3 [ 7.748393] ACPI: Power Button (CM) [PWRB] [ 7.845002] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 7.845002] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000 [ 8.058201] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3268 [ 8.058268] usbcore: registered new interface driver usblp [ 8.114928] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.131877] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.277880] input: PC Speaker as /class/input/input4 [ 8.446742] gameport: EMU10K1 is pci0000:02:09.1/gameport0, io 0xb400, speed 1163kHz [ 8.548464] logips2pp: Detected unknown logitech mouse model 89 [ 8.596000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 8.596048] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 9.032763] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input5 [ 9.062702] usb-storage: device scan complete [ 9.067463] scsi 2:0:0:0: Direct-Access WD 7500AAV External 1.75 PQ: 0 ANSI: 4 [ 9.067463] sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB) [ 9.067463] sd 2:0:0:0: [sdc] Write Protect is off [ 9.067463] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 9.067463] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 9.071471] sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB) [ 9.071471] sd 2:0:0:0: [sdc] Write Protect is off [ 9.071471] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 9.071471] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 9.071471] sdc: sdc1 [ 9.075454] sd 2:0:0:0: [sdc] Attached SCSI disk [ 9.874363] EXT3 FS on dm-1, internal journal [ 10.744982] loop: module loaded [ 10.768816] it87: Found IT8712F chip at 0x290, revision 5 [ 67.079347] kjournald starting. Commit interval 5 seconds [ 67.079347] EXT3 FS on sda1, internal journal [ 67.079347] EXT3-fs: mounted filesystem with ordered data mode. [ 67.143346] kjournald starting. Commit interval 5 seconds [ 67.151478] EXT3 FS on dm-0, internal journal [ 67.151540] EXT3-fs: mounted filesystem with ordered data mode. [ 67.168414] kjournald starting. Commit interval 5 seconds [ 67.171848] EXT3 FS on dm-6, internal journal [ 67.171908] EXT3-fs: mounted filesystem with ordered data mode. [ 67.195728] kjournald starting. Commit interval 5 seconds [ 67.207845] EXT3 FS on dm-2, internal journal [ 67.207906] EXT3-fs: mounted filesystem with ordered data mode. [ 67.231728] kjournald starting. Commit interval 5 seconds [ 67.243862] EXT3 FS on dm-3, internal journal [ 67.243923] EXT3-fs: mounted filesystem with ordered data mode. [ 67.271728] kjournald starting. Commit interval 5 seconds [ 67.279860] EXT3 FS on dm-4, internal journal [ 67.279921] EXT3-fs: mounted filesystem with ordered data mode. [ 67.400414] Adding 2998264k swap on /dev/mapper/hosaka-swapp_00. Priority:-1 extents:1 across:2998264k [ 69.026962] skge eth0: enabling interface [ 69.999219] NET: Registered protocol family 10 [ 69.999219] lo: Disabled Privacy Extensions [ 69.999219] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 70.731312] skge eth0: Link is up at 100 Mbps, full duplex, flow control both [ 70.732610] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 70.929763] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 70.929763] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 [ 70.929763] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 73.262960] Clocksource tsc unstable (delta = -114612540 ns) [ 74.125193] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 74.125200] vboxdrv: Successfully done. [ 74.125202] vboxdrv: Found 2 processor cores. [ 74.125231] VBoxDrv: dbg - g_abExecMemory=ffffffffa03079e0 [ 74.125273] vboxdrv: fAsync=1 offMin=0x3c1d0 offMax=0x3c1d0 [ 74.125343] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 74.125369] vboxdrv: Successfully loaded version 3.0.6 (interface 0x000e0000). [ 74.368999] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa04a3960 [ 74.398858] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa04bb620 [ 75.396041] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 79.559941] [drm] Initialized drm 1.1.0 20060810 [ 79.571960] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 [ 79.571970] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16 [ 79.572039] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 82.262027] eth0: no IPv6 routers present [ 115.158173] kjournald starting. Commit interval 5 seconds [ 115.158184] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 115.158602] EXT3 FS on sdc1, internal journal [ 115.158607] EXT3-fs: recovery complete. [ 115.158913] EXT3-fs: mounted filesystem with ordered data mode.