Hi,
On Wed, 03.02.2010 at 23:45:45 +0100, Brice Goglin <brice.gog...@ens-lyon.org> wrote: > This probably explains things: > > (II) RADEON(0): [drm] installed DRM signal handler > (EE) RADEON(0): [pci] Out of memory (-12) > (EE) RADEON(0): [pci] PCI failed to initialize. Disabling the DRI. > (II) RADEON(0): [drm] removed 1 reserved context for kernel > (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8055000 at 0xb7162000 > (II) RADEON(0): [drm] Closed DRM master. > (II) RADEON(0): RADEONRestoreMemMapRegisters() : > (II) RADEON(0): MC_FB_LOCATION : 0x00d600c0 0x00d600c0 > (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000 > (==) RADEON(0): Backing store disabled > (WW) RADEON(0): Direct rendering disabled > (EE) RADEON(0): Acceleration initialization failed > (II) RADEON(0): Acceleration disabled yes, now that you say it... I'm rather clueless wrt. X. :( > Do you see anything interesting in dmesg ? No, but then, I don't know what to look out for. I've therefore attached the complete dmesg. The card is the on-board card on an Asus M4A785TD-V EVO board. -- Kind regards, --Toni++
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-trunk-686-bigmem (Debian 2.6.32-5) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 07:12:17 UTC 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037600000 page 2M [ 0.000000] 0037600000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-17000 [ 0.000000] RAMDISK: 375ab000 - 37fef26e [ 0.000000] Allocated new RAMDISK: 00100000 - 00b4426e [ 0.000000] Move RAMDISK from 00000000375ab000 - 0000000037fef26d to 00100000 - 00b4426d [ 0.000000] ACPI: RSDP 000fb4f0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT cff90100 00054 (v01 112509 XSDT0918 20091125 MSFT 00000097) [ 0.000000] ACPI: FACP cff90290 000F4 (v03 112509 FACP0918 20091125 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557) [ 0.000000] ACPI: DSDT cff90450 0D60E (v01 A1392 A1392001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS cffa8000 00040 [ 0.000000] ACPI: APIC cff90390 0007C (v01 112509 APIC0918 20091125 MSFT 00000097) [ 0.000000] ACPI: MCFG cff90410 0003C (v01 112509 OEMMCFG 20091125 MSFT 00000097) [ 0.000000] ACPI: OEMB cffa8040 00072 (v01 112509 OEMB0918 20091125 MSFT 00000097) [ 0.000000] ACPI: HPET cff9f450 00038 (v01 112509 OEMHPET 20091125 MSFT 00000097) [ 0.000000] ACPI: SSDT cff9f490 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 7816MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00014000 - 0001af00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014cab34] TEXT DATA BSS ==> [0001000000 - 00014cab34] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [00014cb000 - 00014d72a0] BRK ==> [00014cb000 - 00014d72a0] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #7 [0000100000 - 0000b4426e] NEW RAMDISK ==> [0000100000 - 0000b4426e] [ 0.000000] #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x00220000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00220000 [ 0.000000] On node 0 totalpages: 2031390 [ 0.000000] free_area_init_node: node 0, pgdat c13aa5a0, node_mem_map c14d9200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 15633 pages used for memmap [ 0.000000] HighMem zone: 1788545 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c5a00000 s37432 r0 d24008 u262144 [ 0.000000] pcpu-alloc: s37432 r0 d24008 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013981 [ 0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686-bigmem root=/dev/mapper/ev0-root ro root=/dev/mapper/ev0-root ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:00220000) [ 0.000000] Memory: 8037948k/8912896k available (2482k kernel code, 86364k reserved, 1309k data, 380k init, 7216712k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc13b4000 - 0xc1413000 ( 380 kB) [ 0.000000] .data : 0xc126c925 - 0xc13b3e68 (1309 kB) [ 0.000000] .text : 0xc1000000 - 0xc126c925 (2482 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3013.676 MHz processor. [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.35 BogoMIPS (lpj=12054704) [ 0.008070] Security Framework initialized [ 0.008102] SELinux: Disabled at boot. [ 0.008134] Mount-cache hash table entries: 512 [ 0.008227] Initializing cgroup subsys ns [ 0.008257] Initializing cgroup subsys cpuacct [ 0.008288] Initializing cgroup subsys devices [ 0.008318] Initializing cgroup subsys freezer [ 0.008347] Initializing cgroup subsys net_cls [ 0.008386] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008417] CPU: L2 Cache: 512K (64 bytes/line) [ 0.008447] CPU: Physical Processor ID: 0 [ 0.008476] CPU: Processor Core ID: 0 [ 0.008506] mce: CPU supports 6 MCE banks [ 0.008540] using C1E aware idle routine [ 0.008572] Performance Events: AMD PMU driver. [ 0.008628] ... version: 0 [ 0.008657] ... bit width: 48 [ 0.008686] ... generic registers: 4 [ 0.008716] ... value mask: 0000ffffffffffff [ 0.008746] ... max period: 00007fffffffffff [ 0.008775] ... fixed-purpose events: 0 [ 0.008805] ... event mask: 000000000000000f [ 0.008835] Checking 'hlt' instruction... OK. [ 0.024636] ACPI: Core revision 20090903 [ 0.040332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.083600] CPU0: AMD Phenom(tm) II X4 945 Processor stepping 02 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.012000] Initializing CPU#1 [ 0.012000] Calibrating delay using timer specific routine.. 6026.90 BogoMIPS (lpj=12053801) [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012000] CPU: Physical Processor ID: 0 [ 0.012000] CPU: Processor Core ID: 1 [ 0.168088] CPU1: AMD Phenom(tm) II X4 945 Processor stepping 02 [ 0.168347] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172072] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.012000] Initializing CPU#2 [ 0.012000] Calibrating delay using timer specific routine.. 6026.89 BogoMIPS (lpj=12053796) [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012000] CPU: Physical Processor ID: 0 [ 0.012000] CPU: Processor Core ID: 2 [ 0.260081] CPU2: AMD Phenom(tm) II X4 945 Processor stepping 02 [ 0.260347] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.264079] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.012000] Initializing CPU#3 [ 0.012000] Calibrating delay using timer specific routine.. 6026.91 BogoMIPS (lpj=12053830) [ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012000] CPU: Physical Processor ID: 0 [ 0.012000] CPU: Processor Core ID: 3 [ 0.352079] CPU3: AMD Phenom(tm) II X4 945 Processor stepping 02 [ 0.352352] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.356046] Brought up 4 CPUs [ 0.356076] Total of 4 processors activated (24108.06 BogoMIPS). [ 0.357811] CPU0 attaching sched-domain: [ 0.357813] domain 0: span 0-3 level MC [ 0.357814] groups: 0 1 2 3 [ 0.357818] CPU1 attaching sched-domain: [ 0.357820] domain 0: span 0-3 level MC [ 0.357821] groups: 1 2 3 0 [ 0.357824] CPU2 attaching sched-domain: [ 0.357825] domain 0: span 0-3 level MC [ 0.357827] groups: 2 3 0 1 [ 0.357830] CPU3 attaching sched-domain: [ 0.357831] domain 0: span 0-3 level MC [ 0.357832] groups: 3 0 1 2 [ 0.357939] devtmpfs: initialized [ 0.358185] regulator: core version 0.5 [ 0.358246] NET: Registered protocol family 16 [ 0.358330] ACPI: bus type pci registered [ 0.358398] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.358429] PCI: Not using MMCONFIG. [ 0.359085] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 0.359115] PCI: Using configuration type 1 for base access [ 0.359145] PCI: Using configuration type 1 for extended access [ 0.359411] bio: create slab <bio-0> at 0 [ 0.360317] ACPI: EC: Look up EC in DSDT [ 0.362168] ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND [ 0.362254] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14be140), AE_NOT_FOUND [ 0.362431] ACPI Error (dswload-0781): [PRID] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.362516] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230) [ 0.362601] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14be140), AE_ALREADY_EXISTS [ 0.362713] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error [ 0.362827] ACPI: Executed 3 blocks of module-level executable AML code [ 0.418131] ACPI: Interpreter enabled [ 0.418166] ACPI: (supports S0 S1 S3 S4 S5) [ 0.418339] ACPI: Using IOAPIC for interrupt routing [ 0.418410] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.422335] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.422366] PCI: Using MMCONFIG for extended config space [ 0.428323] ACPI Warning: Incorrect checksum in table [OEMB] - CC, should be C7 (20090903/tbutils-314) [ 0.428480] ACPI: No dock devices found. [ 0.428631] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.428757] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.428788] pci 0000:00:09.0: PME# disabled [ 0.428842] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.428874] pci 0000:00:0a.0: PME# disabled [ 0.428946] pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007] [ 0.428952] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003] [ 0.428958] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007] [ 0.428964] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003] [ 0.428970] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f] [ 0.428976] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe7ffc00-0xfe7fffff] [ 0.428991] pci 0000:00:11.0: set SATA to AHCI mode [ 0.429060] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe7fe000-0xfe7fefff] [ 0.429108] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe7fd000-0xfe7fdfff] [ 0.429172] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe7ff800-0xfe7ff8ff] [ 0.429218] pci 0000:00:12.2: supports D1 D2 [ 0.429220] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.429252] pci 0000:00:12.2: PME# disabled [ 0.429309] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe7fc000-0xfe7fcfff] [ 0.429357] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe7fb000-0xfe7fbfff] [ 0.429421] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe7ff400-0xfe7ff4ff] [ 0.429467] pci 0000:00:13.2: supports D1 D2 [ 0.429468] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.429501] pci 0000:00:13.2: PME# disabled [ 0.429632] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.429637] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.429643] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.429649] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.429654] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.429713] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe7f4000-0xfe7f7fff] [ 0.429751] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.429783] pci 0000:00:14.2: PME# disabled [ 0.429905] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe7fa000-0xfe7fafff] [ 0.430014] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.430017] pci 0000:01:05.0: reg 14 io port: [0xc000-0xc0ff] [ 0.430020] pci 0000:01:05.0: reg 18 32bit mmio: [0xfe9f0000-0xfe9fffff] [ 0.430026] pci 0000:01:05.0: reg 24 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.430035] pci 0000:01:05.0: supports D1 D2 [ 0.430070] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.430072] pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfe9fffff] [ 0.430075] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.430123] pci 0000:02:00.0: reg 10 32bit mmio: [0xfeae0000-0xfeafffff] [ 0.430132] pci 0000:02:00.0: reg 14 32bit mmio: [0xfea00000-0xfea7ffff] [ 0.430140] pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc1f] [ 0.430149] pci 0000:02:00.0: reg 1c 32bit mmio: [0xfeadc000-0xfeadffff] [ 0.430171] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfea80000-0xfeabffff] [ 0.430212] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.430246] pci 0000:02:00.0: PME# disabled [ 0.430334] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff] [ 0.430336] pci 0000:00:09.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.430366] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.430380] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff] [ 0.430389] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xfdff8000-0xfdffbfff] [ 0.430395] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfebf0000-0xfebfffff] [ 0.430421] pci 0000:03:00.0: supports D1 D2 [ 0.430422] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.430454] pci 0000:03:00.0: PME# disabled [ 0.430535] pci 0000:00:0a.0: bridge io port: [0xe000-0xefff] [ 0.430537] pci 0000:00:0a.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.430540] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.430592] pci 0000:00:14.4: transparent bridge [ 0.430637] pci_bus 0000:00: on NUMA node 0 [ 0.430641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.430791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.430852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.430894] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.430952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.434275] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15) [ 0.434631] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15) [ 0.434986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15) [ 0.435340] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.435695] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.436096] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.436507] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15) [ 0.436862] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.437242] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.437276] vgaarb: loaded [ 0.437339] PCI: Using ACPI for IRQ routing [ 0.437498] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.437659] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.440014] hpet: hpet2 irq 24 for MSI [ 0.444011] Switching to clocksource tsc [ 0.444650] pnp: PnP ACPI init [ 0.444686] ACPI: bus type pnp registered [ 0.448348] pnp: PnP ACPI: found 15 devices [ 0.448378] ACPI: ACPI bus type pnp unregistered [ 0.448409] PnPBIOS: Disabled by ACPI PNP [ 0.448447] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.448481] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.448514] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 0.448545] system 00:0b: ioport range 0x40b-0x40b has been reserved [ 0.448576] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved [ 0.448606] system 00:0b: ioport range 0xc00-0xc01 has been reserved [ 0.448637] system 00:0b: ioport range 0xc14-0xc14 has been reserved [ 0.448668] system 00:0b: ioport range 0xc50-0xc51 has been reserved [ 0.448699] system 00:0b: ioport range 0xc52-0xc52 has been reserved [ 0.448730] system 00:0b: ioport range 0xc6c-0xc6c has been reserved [ 0.448761] system 00:0b: ioport range 0xc6f-0xc6f has been reserved [ 0.448792] system 00:0b: ioport range 0xcd0-0xcd1 has been reserved [ 0.448822] system 00:0b: ioport range 0xcd2-0xcd3 has been reserved [ 0.448853] system 00:0b: ioport range 0xcd4-0xcd5 has been reserved [ 0.448884] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved [ 0.448915] system 00:0b: ioport range 0xcd8-0xcdf has been reserved [ 0.448946] system 00:0b: ioport range 0xb00-0xb3f has been reserved [ 0.448977] system 00:0b: ioport range 0x800-0x89f has been reserved [ 0.449008] system 00:0b: ioport range 0xb00-0xb0f has been reserved [ 0.449039] system 00:0b: ioport range 0xb20-0xb3f has been reserved [ 0.449070] system 00:0b: ioport range 0x900-0x90f has been reserved [ 0.449101] system 00:0b: ioport range 0x910-0x91f has been reserved [ 0.449132] system 00:0b: ioport range 0xfe00-0xfefe has been reserved [ 0.449163] system 00:0b: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.449195] system 00:0b: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.449226] system 00:0b: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.449258] system 00:0c: ioport range 0x230-0x23f has been reserved [ 0.449289] system 00:0c: ioport range 0x290-0x29f has been reserved [ 0.449320] system 00:0c: ioport range 0x300-0x30f has been reserved [ 0.449351] system 00:0c: ioport range 0xa30-0xa3f has been reserved [ 0.449383] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.449416] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.449447] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 0.449478] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.449509] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved [ 0.449542] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.484225] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.484256] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.484287] pci 0000:00:01.0: MEM window: 0xfe800000-0xfe9fffff [ 0.484318] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.484353] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.484384] pci 0000:00:09.0: IO window: 0xd000-0xdfff [ 0.484415] pci 0000:00:09.0: MEM window: 0xfea00000-0xfeafffff [ 0.484446] pci 0000:00:09.0: PREFETCH window: disabled [ 0.484476] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:03 [ 0.484507] pci 0000:00:0a.0: IO window: 0xe000-0xefff [ 0.484538] pci 0000:00:0a.0: MEM window: 0xfeb00000-0xfebfffff [ 0.484569] pci 0000:00:0a.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.484603] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04 [ 0.484633] pci 0000:00:14.4: IO window: disabled [ 0.484666] pci 0000:00:14.4: MEM window: disabled [ 0.484697] pci 0000:00:14.4: PREFETCH window: disabled [ 0.484736] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.484767] pci 0000:00:09.0: setting latency timer to 64 [ 0.484772] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.484804] pci 0000:00:0a.0: setting latency timer to 64 [ 0.484811] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.484813] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.484814] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.484816] pci_bus 0000:01: resource 1 mem: [0xfe800000-0xfe9fffff] [ 0.484818] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.484820] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.484821] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.484823] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.484825] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.484826] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.484828] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.484830] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.484848] NET: Registered protocol family 2 [ 0.484930] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.485137] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.485518] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.485721] TCP: Hash tables configured (established 131072 bind 65536) [ 0.485752] TCP reno registered [ 0.485826] NET: Registered protocol family 1 [ 0.627460] pci 0000:01:05.0: Boot video device [ 0.627489] Unpacking initramfs... [ 0.811121] Freeing initrd memory: 10512k freed [ 0.813854] audit: initializing netlink socket (disabled) [ 0.813892] type=2000 audit(1265188913.811:1): initialized [ 0.814346] highmem bounce pool size: 64 pages [ 0.814376] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.815226] VFS: Disk quotas dquot_6.5.2 [ 0.815287] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.815360] msgmni has been set to 1626 [ 0.815527] alg: No test for stdrng (krng) [ 0.815585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.815618] io scheduler noop registered [ 0.815647] io scheduler anticipatory registered [ 0.815677] io scheduler deadline registered [ 0.815729] io scheduler cfq registered (default) [ 0.815832] pcieport 0000:00:09.0: irq 25 for MSI/MSI-X [ 0.815836] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.815888] pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X [ 0.815892] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.815968] isapnp: Scanning for PnP cards... [ 1.169770] isapnp: No Plug & Play device found [ 1.170552] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.170677] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.170941] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.171068] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.171099] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.171244] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.171315] mice: PS/2 mouse device common for all mice [ 1.171355] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 1.171408] rtc_cmos 00:03: RTC can wake from S4 [ 1.171457] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.171974] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.172028] cpuidle: using governor ladder [ 1.172058] cpuidle: using governor menu [ 1.172089] No iBFT detected. [ 1.172338] TCP cubic registered [ 1.172451] NET: Registered protocol family 10 [ 1.172767] lo: Disabled Privacy Extensions [ 1.172992] Mobile IPv6 [ 1.173022] NET: Registered protocol family 17 [ 1.173058] Using IPI No-Shortcut mode [ 1.173125] registered taskstats version 1 [ 1.173449] rtc_cmos 00:03: setting system clock to 2010-02-03 09:21:54 UTC (1265188914) [ 1.173516] Freeing unused kernel memory: 380k freed [ 1.173653] Write protecting the kernel text: 2484k [ 1.173700] Write protecting the kernel read-only data: 888k [ 1.188916] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.251046] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.251082] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.251158] e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.251215] e1000e 0000:02:00.0: setting latency timer to 64 [ 1.251358] e1000e 0000:02:00.0: irq 27 for MSI/MSI-X [ 1.251361] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X [ 1.251362] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X [ 1.269527] SCSI subsystem initialized [ 1.278191] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.278229] ACPI: Power Button [PWRB] [ 1.278299] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.278332] ACPI: Power Button [PWRF] [ 1.281054] usbcore: registered new interface driver usbfs [ 1.281101] usbcore: registered new interface driver hub [ 1.281230] usbcore: registered new device driver usb [ 1.282403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.282451] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.282496] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.282538] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.282593] ehci_hcd 0000:00:12.2: debug port 1 [ 1.282639] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800 [ 1.284419] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.284460] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.284512] r8169 0000:03:00.0: setting latency timer to 64 [ 1.284548] r8169 0000:03:00.0: irq 30 for MSI/MSI-X [ 1.284934] eth0: RTL8168d/8111d at 0xf82a8000, 90:e6:ba:d7:6c:66, XID 083000c0 IRQ 30 [ 1.285547] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.288989] r8169 0000:03:00.0: firmware: requesting rtl8168d-2.fw [ 1.290429] eth0: unable to apply firmware patch [ 1.292543] Uniform Multi-Platform E-IDE driver [ 1.296038] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.296087] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.296119] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.296151] usb usb1: Product: EHCI Host Controller [ 1.296181] usb usb1: Manufacturer: Linux 2.6.32-trunk-686-bigmem ehci_hcd [ 1.296211] usb usb1: SerialNumber: 0000:00:12.2 [ 1.296303] usb usb1: configuration #1 chosen from 1 choice [ 1.296358] hub 1-0:1.0: USB hub found [ 1.296392] hub 1-0:1.0: 6 ports detected [ 1.296472] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.296516] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.296550] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2 [ 1.296600] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000 [ 1.304590] libata version 3.00 loaded. [ 1.360019] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.360051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.360084] usb usb2: Product: OHCI Host Controller [ 1.360114] usb usb2: Manufacturer: Linux 2.6.32-trunk-686-bigmem ohci_hcd [ 1.360144] usb usb2: SerialNumber: 0000:00:12.0 [ 1.360220] usb usb2: configuration #1 chosen from 1 choice [ 1.360267] hub 2-0:1.0: USB hub found [ 1.360303] hub 2-0:1.0: 3 ports detected [ 1.360367] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00) [ 1.360402] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.360444] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later [ 1.360478] ide0: BM-DMA at 0xff00-0xff07 [ 1.360512] ide1: BM-DMA at 0xff08-0xff0f [ 1.360543] Probing IDE interface ide0... [ 1.368002] 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:50:03:4d [ 1.368037] 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 1.368078] 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: e46981-003 [ 1.928042] Probing IDE interface ide1... [ 2.093346] udev: renamed network interface eth0 to eth1 [ 2.120183] udev: renamed network interface eth1_rename to eth0 [ 2.496058] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.496148] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.496240] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.496282] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.496317] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 2.496371] ehci_hcd 0000:00:13.2: debug port 1 [ 2.496414] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400 [ 2.508028] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.508070] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.508101] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.508133] usb usb3: Product: EHCI Host Controller [ 2.508163] usb usb3: Manufacturer: Linux 2.6.32-trunk-686-bigmem ehci_hcd [ 2.508193] usb usb3: SerialNumber: 0000:00:13.2 [ 2.508264] usb usb3: configuration #1 chosen from 1 choice [ 2.508313] hub 3-0:1.0: USB hub found [ 2.508345] hub 3-0:1.0: 6 ports detected [ 2.508448] ahci 0000:00:11.0: version 3.0 [ 2.508460] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.508577] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.508611] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.509152] scsi0 : ahci [ 2.509257] scsi1 : ahci [ 2.509327] scsi2 : ahci [ 2.509397] scsi3 : ahci [ 2.509452] ata1: SATA max UDMA/133 abar m1...@0xfe7ffc00 port 0xfe7ffd00 irq 22 [ 2.509486] ata2: SATA max UDMA/133 abar m1...@0xfe7ffc00 port 0xfe7ffd80 irq 22 [ 2.509519] ata3: SATA max UDMA/133 abar m1...@0xfe7ffc00 port 0xfe7ffe00 irq 22 [ 2.509553] ata4: SATA max UDMA/133 abar m1...@0xfe7ffc00 port 0xfe7ffe80 irq 22 [ 2.509608] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.509651] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 2.509686] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 2.509732] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000 [ 2.568016] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.568048] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.568081] usb usb4: Product: OHCI Host Controller [ 2.568111] usb usb4: Manufacturer: Linux 2.6.32-trunk-686-bigmem ohci_hcd [ 2.568142] usb usb4: SerialNumber: 0000:00:12.1 [ 2.568216] usb usb4: configuration #1 chosen from 1 choice [ 2.568264] hub 4-0:1.0: USB hub found [ 2.568299] hub 4-0:1.0: 3 ports detected [ 2.568377] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.568419] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.568452] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.568501] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000 [ 2.628015] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.628048] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.628080] usb usb5: Product: OHCI Host Controller [ 2.628110] usb usb5: Manufacturer: Linux 2.6.32-trunk-686-bigmem ohci_hcd [ 2.628141] usb usb5: SerialNumber: 0000:00:13.0 [ 2.628215] usb usb5: configuration #1 chosen from 1 choice [ 2.628262] hub 5-0:1.0: USB hub found [ 2.628297] hub 5-0:1.0: 3 ports detected [ 2.628362] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.628403] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.628436] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.628480] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000 [ 2.688015] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.688047] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.688079] usb usb6: Product: OHCI Host Controller [ 2.688109] usb usb6: Manufacturer: Linux 2.6.32-trunk-686-bigmem ohci_hcd [ 2.688139] usb usb6: SerialNumber: 0000:00:13.1 [ 2.688212] usb usb6: configuration #1 chosen from 1 choice [ 2.688259] hub 6-0:1.0: USB hub found [ 2.688294] hub 6-0:1.0: 3 ports detected [ 2.688357] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.688400] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.688433] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.688476] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000 [ 2.748028] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.748061] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.748093] usb usb7: Product: OHCI Host Controller [ 2.748123] usb usb7: Manufacturer: Linux 2.6.32-trunk-686-bigmem ohci_hcd [ 2.748153] usb usb7: SerialNumber: 0000:00:14.5 [ 2.748223] usb usb7: configuration #1 chosen from 1 choice [ 2.748269] hub 7-0:1.0: USB hub found [ 2.748304] hub 7-0:1.0: 2 ports detected [ 2.828056] ata4: SATA link down (SStatus 0 SControl 300) [ 2.904023] usb 4-2: new low speed USB device using ohci_hcd and address 2 [ 2.992039] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.992090] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.992622] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.993069] ata3.00: ATA-8: ST31000528AS, CC37, max UDMA/133 [ 2.993099] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.993670] ata1.00: ATA-8: ST31000528AS, CC37, max UDMA/133 [ 2.993700] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.994296] ata3.00: configured for UDMA/133 [ 2.994935] ata1.00: configured for UDMA/133 [ 2.995615] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL01, max UDMA/100 [ 2.999410] ata2.00: configured for UDMA/100 [ 3.008078] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC37 PQ: 0 ANSI: 5 [ 3.023367] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL01 PQ: 0 ANSI: 5 [ 3.023525] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC37 PQ: 0 ANSI: 5 [ 3.028602] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.028658] sd 0:0:0:0: [sda] Write Protect is off [ 3.028672] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.028694] sd 2:0:0:0: [sdb] Write Protect is off [ 3.028696] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.028707] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.028767] sdb: [ 3.028821] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.028863] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.028961] sda: sda1 sda2 [ 3.033175] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.034849] sdb1 sdb2 [ 3.035072] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3.052073] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.052108] Uniform CD-ROM driver Revision: 3.20 [ 3.052191] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.054714] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.054768] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.054817] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.073009] usb 4-2: New USB device found, idVendor=046d, idProduct=c03f [ 3.073042] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.073074] usb 4-2: Product: USB-PS/2 Optical Mouse [ 3.073103] usb 4-2: Manufacturer: Logitech [ 3.073176] usb 4-2: configuration #1 chosen from 1 choice [ 3.081825] usbcore: registered new interface driver hiddev [ 3.087139] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3 [ 3.087213] generic-usb 0003:046D:C03F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.1-2/input0 [ 3.087261] usbcore: registered new interface driver usbhid [ 3.087293] usbhid: v2.6:USB HID core driver [ 3.277905] md: raid1 personality registered for level 1 [ 3.284670] md: md0 stopped. [ 3.285801] md: bind<sdb1> [ 3.287017] md: bind<sda1> [ 3.287887] raid1: raid set md0 active with 2 out of 2 mirrors [ 3.287933] md0: detected capacity change from 0 to 197263360 [ 3.288510] md0: unknown partition table [ 3.311146] md: md1 stopped. [ 3.311794] md: bind<sdb2> [ 3.311965] md: bind<sda2> [ 3.312784] raid1: raid set md1 active with 2 out of 2 mirrors [ 3.312828] md1: detected capacity change from 0 to 1000004780032 [ 3.313574] md1: unknown partition table [ 3.318589] device-mapper: uevent: version 1.0.3 [ 3.318715] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 20.799998] PM: Starting manual resume from disk [ 20.883408] kjournald starting. Commit interval 5 seconds [ 20.883413] EXT3-fs: mounted filesystem with ordered data mode. [ 22.714645] udev: starting version 150 [ 22.858953] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 22.863623] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.895979] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 22.905377] parport_pc 00:06: reported by Plug and Play ACPI [ 22.905469] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 22.920285] processor LNXCPU:00: registered as cooling_device0 [ 22.920675] processor LNXCPU:01: registered as cooling_device1 [ 22.921050] processor LNXCPU:02: registered as cooling_device2 [ 22.921421] processor LNXCPU:03: registered as cooling_device3 [ 23.011962] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 23.011993] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 23.219270] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 23.799771] EXT3 FS on dm-1, internal journal [ 24.126851] loop: module loaded [ 28.453346] kjournald starting. Commit interval 5 seconds [ 28.465916] EXT3 FS on md0, internal journal [ 28.465974] EXT3-fs: mounted filesystem with ordered data mode. [ 28.695005] kjournald starting. Commit interval 5 seconds [ 28.719011] EXT3 FS on dm-9, internal journal [ 28.719069] EXT3-fs: mounted filesystem with ordered data mode. [ 28.862300] kjournald starting. Commit interval 5 seconds [ 28.864206] EXT3 FS on dm-10, internal journal [ 28.864263] EXT3-fs: mounted filesystem with ordered data mode. [ 28.947679] kjournald starting. Commit interval 5 seconds [ 28.948191] EXT3 FS on dm-8, internal journal [ 28.948249] EXT3-fs: mounted filesystem with ordered data mode. [ 29.010817] kjournald starting. Commit interval 5 seconds [ 29.011090] EXT3 FS on dm-3, internal journal [ 29.011148] EXT3-fs: mounted filesystem with ordered data mode. [ 29.076889] kjournald starting. Commit interval 5 seconds [ 29.080196] EXT3 FS on dm-4, internal journal [ 29.080253] EXT3-fs: mounted filesystem with ordered data mode. [ 29.128987] kjournald starting. Commit interval 5 seconds [ 29.132530] EXT3 FS on dm-5, internal journal [ 29.132588] EXT3-fs: mounted filesystem with ordered data mode. [ 29.172865] kjournald starting. Commit interval 5 seconds [ 29.181198] EXT3 FS on dm-6, internal journal [ 29.181256] EXT3-fs: mounted filesystem with ordered data mode. [ 29.212958] kjournald starting. Commit interval 5 seconds [ 29.213554] EXT3 FS on dm-7, internal journal [ 29.213612] EXT3-fs: mounted filesystem with ordered data mode. [ 29.323656] Adding 15622136k swap on /dev/mapper/ev0-swap. Priority:-1 extents:1 across:15622136k [ 30.867437] NET: Registered protocol family 15 [ 30.905212] alg: No test for cipher_null (cipher_null-generic) [ 30.905264] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 30.905311] alg: No test for digest_null (digest_null-generic) [ 30.905359] alg: No test for compress_null (compress_null-generic) [ 31.019664] padlock: VIA PadLock Hash Engine not detected. [ 32.096051] r8169: eth1: link up [ 32.096084] r8169: eth1: link up [ 32.248639] PPP generic driver version 2.4.2 [ 32.313622] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 33.110597] ip_tables: (C) 2000-2006 Netfilter Core Team [ 33.916880] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 33.916916] 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 33.917162] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 37.613655] device eth0 entered promiscuous mode [ 38.114605] PPP BSD Compression module registered [ 38.133321] PPP Deflate Compression module registered [ 38.853847] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 38.854008] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 38.854041] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 38.854073] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 40.397935] powernow-k8: Found 1 AMD Phenom(tm) II X4 945 Processor processors (4 cpu cores) (version 2.20.00) [ 40.397964] powernow-k8: 0 : pstate 0 (3000 MHz) [ 40.397966] powernow-k8: 1 : pstate 1 (2300 MHz) [ 40.397967] powernow-k8: 2 : pstate 2 (1800 MHz) [ 40.397968] powernow-k8: 3 : pstate 3 (800 MHz) [ 42.292028] eth1: no IPv6 routers present [ 44.720023] eth0: no IPv6 routers present [ 71.109457] kvm: Nested Virtualization enabled [ 71.109504] kvm: Nested Paging enabled [ 82.850729] Bluetooth: Core ver 2.15 [ 82.850842] NET: Registered protocol family 31 [ 82.850882] Bluetooth: HCI device and connection manager initialized [ 82.850925] Bluetooth: HCI socket layer initialized [ 82.974483] Bluetooth: L2CAP ver 2.14 [ 82.974527] Bluetooth: L2CAP socket layer initialized [ 83.016721] Bluetooth: RFCOMM TTY layer initialized [ 83.016770] Bluetooth: RFCOMM socket layer initialized [ 83.016811] Bluetooth: RFCOMM ver 1.11 [ 83.106283] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 83.106316] Bluetooth: BNEP filters: protocol multicast [ 83.204750] Bridge firewalling registered [ 83.242920] Bluetooth: SCO (Voice Link) ver 0.6 [ 83.242954] Bluetooth: SCO socket layer initialized
