Subject: alsa-base: Microphone of EeePC 1005ha not usable. Package: alsa-base Severity: normal
The microphone of the EeePC 1005ha seems to be not usable at all. The sound output works fine. I've tried to set the volume with alsamixer to 100%, but I only get some kind of quiet noise. The systems uses testing and is up-to-date. Any ideas? Thanks. == dmesg == [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable) [ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 0C0000000 write-back [ 0.000000] 1 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 2f10c000 - 2f9f7f2f [ 0.000000] ACPI: RSDP 000fb9e0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 3f7a0000 00040 (v01 _ASUS_ Notebook 01001005 MSFT 00000097) [ 0.000000] ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 01001005 MSFT 00000097) [ 0.000000] ACPI: DSDT 3f7a0430 080A2 (v01 A1311 A1311000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 3f7ae000 00040 [ 0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 01001005 MSFT 00000097) [ 0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 01001005 MSFT 00000097) [ 0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 01001005 MSFT 00000097) [ 0.000000] ACPI: HPET 3f7a84e0 00038 (v01 A_M_I_ OEMHPET 01001005 MSFT 00000097) [ 0.000000] ACPI: SSDT 3f7aeb80 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SLIC 3f7a8520 00176 (v01 _ASUS_ Notebook 01001005 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 131MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==> [0001000000 - 00014a1334] [ 0.000000] #4 [002f10c000 - 002f9f7f2f] RAMDISK ==> [002f10c000 - 002f9f7f2f] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00014a2000 - 00014a81e0] BRK ==> [00014a2000 - 00014a81e0] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003f7a0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f7a0 [ 0.000000] On node 0 totalpages: 259887 [ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map c14aa200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 264 pages used for memmap [ 0.000000] HighMem zone: 33434 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34072 r0 d23272 u2097152 [ 0.000000] pcpu-alloc: s34072 r0 d23272 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257855 [ 0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-686 root=/dev/mapper/neutrino-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:0003f7a0) [ 0.000000] Memory: 1015968k/1040000k available (2414k kernel code, 22992k reserved, 1266k data, 368k init, 134792k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB) [ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB) [ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1599.800 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.60 BogoMIPS (lpj=6399200) [ 0.004045] Security Framework initialized [ 0.004053] SELinux: Disabled at boot. [ 0.004066] Mount-cache hash table entries: 512 [ 0.004291] Initializing cgroup subsys ns [ 0.004301] Initializing cgroup subsys cpuacct [ 0.004309] Initializing cgroup subsys devices [ 0.004314] Initializing cgroup subsys freezer [ 0.004319] Initializing cgroup subsys net_cls [ 0.004354] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004360] CPU: L2 cache: 512K [ 0.004365] CPU: Physical Processor ID: 0 [ 0.004369] CPU: Processor Core ID: 0 [ 0.004375] mce: CPU supports 5 MCE banks [ 0.004389] CPU0: Thermal monitoring enabled (TM2) [ 0.004396] using mwait in idle threads. [ 0.004408] Performance Events: Atom events, Intel PMU driver. [ 0.004421] ... version: 3 [ 0.004424] ... bit width: 40 [ 0.004428] ... generic registers: 2 [ 0.004433] ... value mask: 000000ffffffffff [ 0.004437] ... max period: 000000007fffffff [ 0.004441] ... fixed-purpose events: 3 [ 0.004445] ... event mask: 0000000700000003 [ 0.004453] Checking 'hlt' instruction... OK. [ 0.021589] ACPI: Core revision 20090903 [ 0.044420] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.088179] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] Calibrating delay using timer specific routine.. 3199.62 BogoMIPS (lpj=6399259) [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.008000] CPU: L2 cache: 512K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 0 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.176140] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.176168] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.180080] Brought up 2 CPUs [ 0.180087] Total of 2 processors activated (6399.22 BogoMIPS). [ 0.180320] CPU0 attaching sched-domain: [ 0.180329] domain 0: span 0-1 level SIBLING [ 0.180335] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.180347] domain 1: span 0-1 level MC [ 0.180352] groups: 0-1 (cpu_power = 1178) [ 0.180363] CPU1 attaching sched-domain: [ 0.180368] domain 0: span 0-1 level SIBLING [ 0.180373] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.180384] domain 1: span 0-1 level MC [ 0.180389] groups: 0-1 (cpu_power = 1178) [ 0.180721] devtmpfs: initialized [ 0.181525] regulator: core version 0.5 [ 0.181643] NET: Registered protocol family 16 [ 0.181826] ACPI: bus type pci registered [ 0.181960] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.181967] PCI: Not using MMCONFIG. [ 0.182278] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.182283] PCI: Using configuration type 1 for base access [ 0.183114] bio: create slab <bio-0> at 0 [ 0.184931] ACPI: EC: Look up EC in DSDT [ 0.187133] ACPI: BIOS _OSI(Linux) query ignored [ 0.187236] ACPI Error (dswload-0659): [USB0] Namespace lookup failure, AE_NOT_FOUND [ 0.187247] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230) [ 0.187258] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c1499920), AE_NOT_FOUND [ 0.187348] ACPI: Executed 2 blocks of module-level executable AML code [ 0.201894] ACPI: Interpreter enabled [ 0.201910] ACPI: (supports S0 S3 S4 S5) [ 0.201958] ACPI: Using IOAPIC for interrupt routing [ 0.202057] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.205983] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.205989] PCI: Using MMCONFIG for extended config space [ 0.218156] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.218588] ACPI: No dock devices found. [ 0.218843] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.218985] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7e00000-0xf7e7ffff] [ 0.218995] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07] [ 0.219005] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.219014] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7dc0000-0xf7dfffff] [ 0.219065] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7e80000-0xf7efffff] [ 0.219205] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7db8000-0xf7dbbfff] [ 0.219280] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.219289] pci 0000:00:1b.0: PME# disabled [ 0.219403] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.219412] pci 0000:00:1c.0: PME# disabled [ 0.219528] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.219536] pci 0000:00:1c.1: PME# disabled [ 0.219654] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.219662] pci 0000:00:1c.3: PME# disabled [ 0.219745] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f] [ 0.219827] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f] [ 0.219909] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f] [ 0.219990] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f] [ 0.220089] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7db7c00-0xf7db7fff] [ 0.220166] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.220174] pci 0000:00:1d.7: PME# disabled [ 0.220380] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.220388] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.220396] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003) [ 0.220404] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) [ 0.220413] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007) [ 0.220504] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087] [ 0.220517] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003] [ 0.220529] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07] [ 0.220541] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883] [ 0.220553] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f] [ 0.220566] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7db7800-0xf7db7bff] [ 0.220612] pci 0000:00:1f.2: PME# supported from D3hot [ 0.220620] pci 0000:00:1f.2: PME# disabled [ 0.220797] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbff0000-0xfbffffff] [ 0.220893] pci 0000:02:00.0: supports D1 [ 0.220898] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.220907] pci 0000:02:00.0: PME# disabled [ 0.221003] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.221016] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff] [ 0.221101] pci 0000:01:00.0: reg 10 64bit mmio: [0xf7fc0000-0xf7ffffff] [ 0.221117] pci 0000:01:00.0: reg 18 io port: [0xec00-0xec7f] [ 0.221209] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.221219] pci 0000:01:00.0: PME# disabled [ 0.221306] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff] [ 0.221315] pci 0000:00:1c.3: bridge 32bit mmio: [0xf7f00000-0xf7ffffff] [ 0.221391] pci 0000:00:1e.0: transparent bridge [ 0.221438] pci_bus 0000:00: on NUMA node 0 [ 0.221450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.221782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.221880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.244629] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.244870] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.245108] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.245346] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.245586] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.245826] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.246066] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.246306] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.246526] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.246548] vgaarb: loaded [ 0.246697] PCI: Using ACPI for IRQ routing [ 0.247069] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.247080] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.252024] Switching to clocksource tsc [ 0.254241] pnp: PnP ACPI init [ 0.254281] ACPI: bus type pnp registered [ 0.258343] pnp: PnP ACPI: found 13 devices [ 0.258349] ACPI: ACPI bus type pnp unregistered [ 0.258357] PnPBIOS: Disabled by ACPI PNP [ 0.258381] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 0.258399] system 00:08: ioport range 0x25c-0x25f has been reserved [ 0.258407] system 00:08: ioport range 0x380-0x383 has been reserved [ 0.258414] system 00:08: ioport range 0x400-0x41f has been reserved [ 0.258421] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.258428] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.258435] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.258443] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved [ 0.258451] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.258458] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.258466] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.258473] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.258481] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.258495] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.258502] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.258515] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.258527] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.258535] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.258542] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.258549] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved [ 0.293640] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.293649] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.293660] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff [ 0.293670] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff [ 0.293683] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.293690] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 0.293700] pci 0000:00:1c.1: MEM window: 0xf8000000-0xfbffffff [ 0.293709] pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f6ffffff [ 0.293722] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01 [ 0.293729] pci 0000:00:1c.3: IO window: 0xe000-0xefff [ 0.293739] pci 0000:00:1c.3: MEM window: 0xf7f00000-0xf7ffffff [ 0.293748] pci 0000:00:1c.3: PREFETCH window: 0x00000040400000-0x000000405fffff [ 0.293761] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.293765] pci 0000:00:1e.0: IO window: disabled [ 0.293774] pci 0000:00:1e.0: MEM window: disabled [ 0.293782] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.293804] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.293824] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.293834] pci 0000:00:1c.0: setting latency timer to 64 [ 0.293849] pci 0000:00:1c.1: enabling device (0106 -> 0107) [ 0.293860] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.293869] pci 0000:00:1c.1: setting latency timer to 64 [ 0.293887] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.293896] pci 0000:00:1c.3: setting latency timer to 64 [ 0.293909] pci 0000:00:1e.0: setting latency timer to 64 [ 0.293918] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.293925] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.293931] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff] [ 0.293937] pci_bus 0000:04: resource 1 mem: [0x40000000-0x401fffff] [ 0.293944] pci_bus 0000:04: resource 2 pref mem [0x40200000-0x403fffff] [ 0.293950] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.293956] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.293963] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf6ffffff] [ 0.293969] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.293976] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff] [ 0.293982] pci_bus 0000:01: resource 2 pref mem [0x40400000-0x405fffff] [ 0.293989] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.293995] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] [ 0.294062] NET: Registered protocol family 2 [ 0.294248] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.294875] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.295903] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.296397] TCP: Hash tables configured (established 131072 bind 65536) [ 0.296404] TCP reno registered [ 0.296626] NET: Registered protocol family 1 [ 0.296673] pci 0000:00:02.0: Boot video device [ 0.296909] Unpacking initramfs... [ 0.738948] Freeing initrd memory: 9135k freed [ 0.748951] audit: initializing netlink socket (disabled) [ 0.748976] type=2000 audit(1268495492.747:1): initialized [ 0.749298] highmem bounce pool size: 64 pages [ 0.749308] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.752492] VFS: Disk quotas dquot_6.5.2 [ 0.752622] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.752774] msgmni has been set to 1740 [ 0.753178] alg: No test for stdrng (krng) [ 0.753298] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.753305] io scheduler noop registered [ 0.753310] io scheduler anticipatory registered [ 0.753314] io scheduler deadline registered [ 0.753395] io scheduler cfq registered (default) [ 0.753618] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.753635] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.753875] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.753891] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.754119] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X [ 0.754134] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.754450] isapnp: Scanning for PnP cards... [ 1.108199] isapnp: No Plug & Play device found [ 1.111460] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.112261] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.149883] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.149899] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.150064] mice: PS/2 mouse device common for all mice [ 1.150107] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 1.150150] rtc_cmos 00:03: RTC can wake from S4 [ 1.150238] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.150283] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.150317] cpuidle: using governor ladder [ 1.150322] cpuidle: using governor menu [ 1.150333] No iBFT detected. [ 1.151328] TCP cubic registered [ 1.151729] NET: Registered protocol family 10 [ 1.152952] lo: Disabled Privacy Extensions [ 1.153826] Mobile IPv6 [ 1.153833] NET: Registered protocol family 17 [ 1.153868] Using IPI No-Shortcut mode [ 1.154079] registered taskstats version 1 [ 1.154641] rtc_cmos 00:03: setting system clock to 2010-03-13 15:51:33 UTC (1268495493) [ 1.154751] Freeing unused kernel memory: 368k freed [ 1.155070] Write protecting the kernel text: 2416k [ 1.155112] Write protecting the kernel read-only data: 872k [ 1.187613] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.399145] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.399163] ACPI: Thermal Zone [TZ00] (59 C) [ 1.525484] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.533174] ACPI: Lid Switch [LID] [ 1.533406] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.533422] ACPI: Sleep Button [SLPB] [ 1.533624] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 1.533638] ACPI: Power Button [PWRB] [ 1.533842] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.533855] ACPI: Power Button [PWRF] [ 1.674492] Linux agpgart interface v0.103 [ 1.705470] usbcore: registered new interface driver usbfs [ 1.705784] usbcore: registered new interface driver hub [ 1.706143] usbcore: registered new device driver usb [ 1.750768] SCSI subsystem initialized [ 1.777939] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 1.778290] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 1.781339] acpi device:22: registered as cooling_device0 [ 1.782223] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.782287] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 1.782654] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.798253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.798333] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.798371] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.798382] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.798441] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.798490] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.798513] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.802397] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.805071] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7db7c00 [ 1.817038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.817106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.817116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.817125] usb usb1: Product: EHCI Host Controller [ 1.817132] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd [ 1.817140] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.817385] usb usb1: configuration #1 chosen from 1 choice [ 1.817480] hub 1-0:1.0: USB hub found [ 1.817504] hub 1-0:1.0: 8 ports detected [ 1.916134] libata version 3.00 loaded. [ 1.917226] [drm] Initialized drm 1.1.0 20060810 [ 1.923445] uhci_hcd: USB Universal Host Controller Interface driver [ 1.923567] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.923589] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.923601] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.923639] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.923695] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 1.923799] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.923808] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.923816] usb usb2: Product: UHCI Host Controller [ 1.923823] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 1.923829] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.924103] usb usb2: configuration #1 chosen from 1 choice [ 1.924203] hub 2-0:1.0: USB hub found [ 1.924229] hub 2-0:1.0: 2 ports detected [ 1.924385] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.924406] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.924416] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.924460] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.924528] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 1.924633] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.924644] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.924652] usb usb3: Product: UHCI Host Controller [ 1.924659] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 1.924666] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.924889] usb usb3: configuration #1 chosen from 1 choice [ 1.924983] hub 3-0:1.0: USB hub found [ 1.925007] hub 3-0:1.0: 2 ports detected [ 1.925163] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.925184] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.925194] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.925227] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.925292] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 1.925406] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.925415] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.925423] usb usb4: Product: UHCI Host Controller [ 1.925430] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 1.925437] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.925668] usb usb4: configuration #1 chosen from 1 choice [ 1.925778] hub 4-0:1.0: USB hub found [ 1.925803] hub 4-0:1.0: 2 ports detected [ 1.925965] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.925985] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.925996] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.926024] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.926093] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 1.926199] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.926209] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.926216] usb usb5: Product: UHCI Host Controller [ 1.926223] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 1.926231] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.926466] usb usb5: configuration #1 chosen from 1 choice [ 1.926563] hub 5-0:1.0: USB hub found [ 1.926587] hub 5-0:1.0: 2 ports detected [ 1.951510] ahci 0000:00:1f.2: version 3.0 [ 1.951552] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.951650] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 1.951789] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.951802] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.951816] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.954758] scsi0 : ahci [ 1.959587] scsi1 : ahci [ 1.959992] scsi2 : ahci [ 1.960353] scsi3 : ahci [ 1.961017] ata1: SATA max UDMA/133 abar m1...@0xf7db7800 port 0xf7db7900 irq 27 [ 1.961025] ata2: DUMMY [ 1.961031] ata3: DUMMY [ 1.961036] ata4: DUMMY [ 2.128035] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.262360] usb 1-1: New USB device found, idVendor=0402, idProduct=5661 [ 2.262368] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.262374] usb 1-1: Product: Audio Player [ 2.262379] usb 1-1: Manufacturer: ALi Corp. [ 2.262383] usb 1-1: SerialNumber: 00101000101410067060 [ 2.262560] usb 1-1: configuration #1 chosen from 1 choice [ 2.280055] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.281552] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.281619] Initializing USB Mass Storage driver... [ 2.281810] scsi4 : SCSI emulation for USB Mass Storage devices [ 2.282100] usb-storage: device found at 2 [ 2.282106] usb-storage: waiting for device to settle before scanning [ 2.282137] usbcore: registered new interface driver usb-storage [ 2.282352] USB Mass Storage support registered. [ 2.325950] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133 [ 2.325957] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.328153] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.328499] ata1.00: configured for UDMA/133 [ 2.344221] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5 [ 2.391896] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 2.393178] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.393192] i915 0000:00:02.0: setting latency timer to 64 [ 2.405127] [drm] set up 7M of stolen space [ 2.415730] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.415877] sd 0:0:0:0: [sda] Write Protect is off [ 2.415886] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.415962] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.416367] sda: sda1 sda2 < sda5 > [ 2.434354] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.529161] integrated sync not supported [ 2.576230] usb 1-2: New USB device found, idVendor=13d3, idProduct=5108 [ 2.576242] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.576249] usb 1-2: Product: USB 2.0 Camera [ 2.576255] usb 1-2: Manufacturer: Sonix Technology Co., Ltd. [ 2.576260] usb 1-2: SerialNumber: SN0001 [ 2.576471] usb 1-2: configuration #1 chosen from 1 choice [ 2.692030] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 2.825471] usb 1-3: New USB device found, idVendor=058f, idProduct=6335 [ 2.825480] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.825488] usb 1-3: Product: Mass Storage Device [ 2.825494] usb 1-3: Manufacturer: Generic [ 2.825500] usb 1-3: SerialNumber: 058F63356336 [ 2.825706] usb 1-3: configuration #1 chosen from 1 choice [ 2.828392] scsi5 : SCSI emulation for USB Mass Storage devices [ 2.830011] usb-storage: device found at 4 [ 2.830018] usb-storage: waiting for device to settle before scanning [ 2.959259] integrated sync not supported [ 3.046296] [drm] LVDS-8: set mode 1024x600 e [ 3.292841] Console: switching to colour frame buffer device 128x37 [ 3.300625] fb0: inteldrmfb frame buffer device [ 3.300630] registered panic notifier [ 3.300646] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.373826] device-mapper: uevent: version 1.0.3 [ 3.374709] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 7.280175] usb-storage: device scan complete [ 7.280788] scsi 4:0:0:0: Direct-Access Audio Player PQ: 0 ANSI: 0 CCS [ 7.281526] scsi 4:0:0:1: Direct-Access SD/MMC CARD PQ: 0 ANSI: 0 CCS [ 7.286419] sd 4:0:0:0: [sdb] 8171520 512-byte logical blocks: (4.18 GB/3.89 GiB) [ 7.287308] sd 4:0:0:0: [sdb] Write Protect is off [ 7.287319] sd 4:0:0:0: [sdb] Mode Sense: 3b 00 00 00 [ 7.287327] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.289227] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 7.293043] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.293056] sdb: sdb1 [ 7.296162] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.296175] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 7.828154] usb-storage: device scan complete [ 7.828773] scsi 5:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0 [ 8.227618] sd 5:0:0:0: [sdd] 31388672 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 8.228354] sd 5:0:0:0: [sdd] Write Protect is off [ 8.228362] sd 5:0:0:0: [sdd] Mode Sense: 03 00 00 00 [ 8.228367] sd 5:0:0:0: [sdd] Assuming drive cache: write through [ 8.230728] sd 5:0:0:0: [sdd] Assuming drive cache: write through [ 8.230737] sdd: sdd1 [ 8.233521] sd 5:0:0:0: [sdd] Assuming drive cache: write through [ 8.233534] sd 5:0:0:0: [sdd] Attached SCSI removable disk [ 18.461125] PM: Starting manual resume from disk [ 18.554641] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 20.028856] udev: starting version 151 [ 20.544692] ACPI: SSDT 3f7ae180 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 20.546082] ACPI: SSDT 3f7ae450 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 20.558035] Monitor-Mwait will be used to enter C-1 state [ 20.558151] Monitor-Mwait will be used to enter C-2 state [ 20.558172] Marking TSC unstable due to TSC halts in idle [ 20.558412] processor LNXCPU:00: registered as cooling_device1 [ 20.559514] ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 20.560491] ACPI: SSDT 3f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 20.565411] Switching to clocksource hpet [ 20.574051] intel_rng: FWH not detected [ 20.574598] processor LNXCPU:01: registered as cooling_device2 [ 20.576928] ACPI: AC Adapter [AC0] (on-line) [ 20.675631] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 20.675657] atl1c 0000:01:00.0: setting latency timer to 64 [ 20.789821] atl1c 0000:01:00.0: version 1.0.0.1-NAPI [ 20.800333] ACPI: Battery Slot [BAT0] (battery present) [ 20.957774] cfg80211: Using static regulatory domain info [ 20.957782] cfg80211: Regulatory domain: US [ 20.957789] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.957799] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 20.957807] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 20.957815] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 20.957824] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 20.957833] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 20.957842] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 20.958348] cfg80211: Calling CRDA for country: US [ 21.131870] Linux video capture interface: v2.00 [ 21.282502] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 21.282524] ath9k 0000:02:00.0: setting latency timer to 64 [ 21.312504] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5108) [ 21.332838] ath: EEPROM regdomain: 0x60 [ 21.332846] ath: EEPROM indicates we should expect a direct regpair map [ 21.332857] ath: Country alpha2 being used: 00 [ 21.332862] ath: Regpair used: 0x60 [ 21.334151] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input6 [ 21.334332] usbcore: registered new interface driver uvcvideo [ 21.334343] USB Video Class driver (v0.1.0) [ 21.483879] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 21.484027] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 21.488925] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 21.490681] Registered led device: ath9k-phy0::radio [ 21.490735] Registered led device: ath9k-phy0::assoc [ 21.490781] Registered led device: ath9k-phy0::tx [ 21.490828] Registered led device: ath9k-phy0::rx [ 21.490869] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8ee0000, irq=17 [ 21.627986] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04731/0xa40000 [ 21.700883] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 22.621020] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x020c0000 [ 22.621038] hda_codec: ALC269: BIOS auto-probing. [ 22.621635] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 23.542136] loop: module loaded [ 25.129267] EXT4-fs (dm-5): mounted filesystem with ordered data mode [ 25.184758] EXT4-fs (dm-4): mounted filesystem with ordered data mode [ 25.234688] EXT4-fs (dm-3): mounted filesystem with ordered data mode [ 25.519859] Adding 3002360k swap on /dev/mapper/neutrino-swap_1. Priority:-1 extents:1 across:3002360k [ 27.431645] fuse init (API version 7.13) [ 27.511597] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X [ 27.511742] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 31.533257] Bluetooth: Core ver 2.15 [ 31.533643] NET: Registered protocol family 31 [ 31.533656] Bluetooth: HCI device and connection manager initialized [ 31.533672] Bluetooth: HCI socket layer initialized [ 31.572718] Bluetooth: L2CAP ver 2.14 [ 31.572726] Bluetooth: L2CAP socket layer initialized [ 31.790186] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 31.790203] Bluetooth: BNEP filters: protocol multicast [ 31.882132] Bridge firewalling registered [ 31.945427] Bluetooth: SCO (Voice Link) ver 0.6 [ 31.945443] Bluetooth: SCO socket layer initialized [ 35.128106] integrated sync not supported [ 35.268147] integrated sync not supported [ 37.988035] eth0: no IPv6 routers present [ 42.496476] CPU0 attaching NULL sched-domain. [ 42.496489] CPU1 attaching NULL sched-domain. [ 42.532146] CPU0 attaching sched-domain: [ 42.532157] domain 0: span 0-1 level SIBLING [ 42.532166] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 42.532184] domain 1: span 0-1 level MC [ 42.532192] groups: 0-1 (cpu_power = 1178) [ 42.532206] CPU1 attaching sched-domain: [ 42.532213] domain 0: span 0-1 level SIBLING [ 42.532220] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 42.532237] domain 1: span 0-1 level MC [ 42.532245] groups: 0-1 (cpu_power = 1178) [ 43.605775] integrated sync not supported [ 43.764438] integrated sync not supported [ 43.905053] integrated sync not supported! -- GMX DSL: Internet, Telefon und Entertainment für nur 19,99 EUR/mtl.! http://portal.gmx.net/de/go/dsl02 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org