Package: usb-modeswitch-data Version: 20100221-1 Severity: important Reporting this here for the draisberghof bb requires registration. It's just a bad thing to have to get registrated with dozens of boards, wikis, trac or whatever and keeping track of software. I seek to contribute but not waste effort and energy in useless regs and get humbled by 1k more of spam messages.
Having that said, here's the report: Device: - Model: MC503HSA - Type: MF636 After an usb-modeswitch-data update the modem was unusable as usb-modeswitch-data matched idVendor=19d2, idProduct=0037 in /etc/usb_modeswitch.d/19d2:2000, no ttyUSB? devices being created. l /dev/ttyU* ls: impossibile accedere a /dev/ttyU*: No such file or directory Logging enabled in /lib/udev/usb_modeswitch: /var/log/usb_modeswitch_1-3\:1.0 The log shows a couple of tentatives exposing the problem with the /etc/usb_modeswitch.d/19d2:2000 file. Once this file was removed the ttyUSB? devices where created again. Using debian, usb-modeswitch-data: dpkg -l usb-modeswitch-data Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Nome Versione Descrizione +++-===========================-===========================-====================================================================== ii usb-modeswitch-data 20100221-1 mode switching data for usb-modeswitch dmesg output: [686354.596155] usb 1-3: new high speed USB device using ehci_hcd and address 52 [686354.713111] usb 1-3: New USB device found, idVendor=19d2, idProduct=0037 [686354.713120] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [686354.713127] usb 1-3: Product: ONDA WCDMA Technologies MSM [686354.713132] usb 1-3: Manufacturer: ONDA,Incorporated [686354.713137] usb 1-3: SerialNumber: P673M2ODCD010000 [686354.715352] option 1-3:1.0: GSM modem (1-port) converter detected [686354.715583] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0 [686354.715758] option 1-3:1.1: GSM modem (1-port) converter detected [686354.715936] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1 [686354.717048] scsi54 : usb-storage 1-3:1.2 [686354.717509] option 1-3:1.3: GSM modem (1-port) converter detected [686354.717770] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2 Content of /var/log/usb_modeswitch_1-3\:1.0 : USB_ModeSwitch log from Wed Mar 17 01:43:48 CET 2010 raw args from udev: 1-3:1.0/1-3:1.0 USB dir exists: /sys/bus/usb/devices/1-3 ---------------- USB values from sysfs: manufacturer ONDA,Incorporated product ONDA WCDMA Technologies MSM serial P673M2ODCD010000 ---------------- SCSI attributes not needed, moving on checking config: /etc/usb_modeswitch.d/19d2:2000:uPr=ZTE_WCDMA matching usb(product) match string: ZTE WCDMA device string: ONDA WCDMA Technologies MSM * no match, not switching with this config checking config: /etc/usb_modeswitch.d/19d2:2000:uPr=ZTE_CDMA matching usb(product) match string: ZTE CDMA device string: ONDA WCDMA Technologies MSM * no match, not switching with this config checking config: /etc/usb_modeswitch.d/19d2:2000:uPr=USB_ZTE matching usb(product) match string: USB ZTE device string: ONDA WCDMA Technologies MSM * no match, not switching with this config checking config: /etc/usb_modeswitch.d/19d2:2000 ! matched, now switching (running command: /usr/sbin/usb_modeswitch -I -W -c /etc/usb_modeswitch.d/19d2:2000) verbose output of usb_modeswitch: -------------------------------- usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Found 003 usb_os_find_busses: Found 006 usb_os_find_busses: Found 005 usb_os_find_busses: Found 001 usb_os_find_busses: Found 004 usb_os_find_busses: Found 002 usb_os_find_devices: Found 032 on 003 skipped 1 class/vendor specific interface descriptors usb_os_find_devices: Found 003 on 003 usb_os_find_devices: Found 001 on 003 error obtaining child information: Inappropriate ioctl for device error obtaining child information: Inappropriate ioctl for device usb_os_find_devices: Found 001 on 006 usb_os_find_devices: Found 001 on 005 usb_os_find_devices: Found 048 on 001 usb_os_find_devices: Found 001 on 001 error obtaining child information: Inappropriate ioctl for device usb_os_find_devices: Found 001 on 004 usb_os_find_devices: Couldn't open /dev/bus/usb/002/065 usb_os_find_devices: Found 001 on 002 Reading config file: /etc/usb_modeswitch.d/19d2:2000 * usb-modeswitch: handle USB devices with multiple modes * Version 1.1.0 (C) Josua Dietze 2010 * Based on libusb 0.1.12 ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x19d2 DefaultProduct= 0x2000 TargetVendor= 0x19d2 TargetProduct= not set TargetProductList=0001,0002,0015,0031,0037,0052,0055,0063 TargetClass= not set DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 GCTMode=0 MessageEndpoint= not set MessageContent="5553424312345678000000000000061b000000030000000000000000000000" NeedResponse=0 ResponseEndpoint= not set Interface=0x00 InquireDevice disabled Success check enabled, max. wait time 20 seconds System integration mode enabled Looking for target devices ... searching devices, found USB ID 0a5c:2110 searching devices, found USB ID 0483:2016 searching devices, found USB ID 1d6b:0001 searching devices, found USB ID 1d6b:0001 searching devices, found USB ID 1d6b:0001 searching devices, found USB ID 19d2:2000 found matching vendor ID searching devices, found USB ID 1d6b:0002 searching devices, found USB ID 1d6b:0001 searching devices, found USB ID 1d6b:0002 No devices in target mode or class found Looking for default devices ... searching devices, found USB ID 0a5c:2110 searching devices, found USB ID 0483:2016 searching devices, found USB ID 1d6b:0001 searching devices, found USB ID 1d6b:0001 searching devices, found USB ID 1d6b:0001 searching devices, found USB ID 19d2:2000 found matching vendor ID found matching product ID searching devices, found USB ID 1d6b:0002 searching devices, found USB ID 1d6b:0001 searching devices, found USB ID 1d6b:0002 Found default devices (1) Accessing device 048 on bus 001 ... USB description data (for identification) ------------------------- Manufacturer: ONDA,Incorporated Product: ONDA WCDMA Technologies MSM Serial No.: P673M2ODCD010000 ------------------------- Looking for active driver ... OK, driver found ("usb-storage") OK, driver "usb-storage" detached Setting up communication with interface 0 ... Trying to send the message to endpoint 0x01 ... OK, message successfully sent Checking for mode switch (max. 20 times, once per second) ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Waiting for original device to vanish ... Original device still present after the timeout Mode switch most likely failed. Bye. fail: -------------------------------- (end of usb_modeswitch output) All done, exiting USB_ModeSwitch log from Wed Mar 17 01:51:05 CET 2010 raw args from udev: 1-3:1.0/1-3:1.0 USB dir exists: /sys/bus/usb/devices/1-3 ---------------- USB values from sysfs: manufacturer ONDA,Incorporated product ONDA WCDMA Technologies MSM serial P673M2ODCD010000 ---------------- SCSI attributes not needed, moving on checking config: /etc/usb_modeswitch.d/19d2:2000:uPr=ZTE_WCDMA matching usb(product) match string: ZTE WCDMA device string: ONDA WCDMA Technologies MSM * no match, not switching with this config checking config: /etc/usb_modeswitch.d/19d2:2000:uPr=ZTE_CDMA matching usb(product) match string: ZTE CDMA device string: ONDA WCDMA Technologies MSM * no match, not switching with this config checking config: /etc/usb_modeswitch.d/19d2:2000:uPr=USB_ZTE matching usb(product) match string: USB ZTE device string: ONDA WCDMA Technologies MSM * no match, not switching with this config All done, exiting End of Log l /dev/ttyU* crw-rw---- 1 root dialout 188, 0 17 mar 01:59 /dev/ttyUSB0 crw-rw---- 1 root dialout 188, 1 17 mar 01:59 /dev/ttyUSB1 crw-rw---- 1 root dialout 188, 2 17 mar 02:01 /dev/ttyUSB2 -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.33 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages usb-modeswitch-data depends on: ii udev 151-2 /dev/ and hotplug management daemo Versions of packages usb-modeswitch-data recommends: ii usb-modeswitch 1.1.0-2 mode switching tool for controllin usb-modeswitch-data suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org