Package: installation-reports Debian-installer-version: i386 netinst cd image from cdimages.d.o downloaded 2005-08-06 11:35 +0200 uname -a: Linux saint-ex 2.6.11-9-em64t-p4-smp #1 SMP Mon Jun 27 23:02:54 MDT 2005 x86_64 GNU/Linux Date: 2005-08-06 12:00 +0200 Method: netinst expert26 vga=795
Machine: Dell 9100 Processor: Intel P4 Dual Core 3.0 GHz Memory: 1 G Root Device: sata /dev/sde Root Size/partition table: Disk /dev/sde: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 62 497983+ 83 Linux /dev/sde2 63 305 1951897+ 83 Linux /dev/sde3 306 19452 153798277+ 5 Extended /dev/sde5 306 7600 58597056 8e Linux LVM /dev/sde6 7601 7843 1951866 82 Linux swap / Solaris /dev/sde7 7844 19452 93249261 8e Linux LVM installation is on /dev/sde2 (this is a test partition, my real system will be on other partitions) Output of lspci and lspci -n: lspci 0000:00:00.0 Host bridge: Intel Corp.: Unknown device 2770 0000:00:01.0 PCI bridge: Intel Corp.: Unknown device 2771 0000:00:1c.0 PCI bridge: Intel Corp.: Unknown device 27d0 (rev 01) 0000:00:1c.4 PCI bridge: Intel Corp.: Unknown device 27e0 (rev 01) 0000:00:1c.5 PCI bridge: Intel Corp.: Unknown device 27e2 (rev 01) 0000:00:1d.0 USB Controller: Intel Corp.: Unknown device 27c8 (rev 01) 0000:00:1d.1 USB Controller: Intel Corp.: Unknown device 27c9 (rev 01) 0000:00:1d.2 USB Controller: Intel Corp.: Unknown device 27ca (rev 01) 0000:00:1d.3 USB Controller: Intel Corp.: Unknown device 27cb (rev 01) 0000:00:1d.7 USB Controller: Intel Corp.: Unknown device 27cc (rev 01) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev e1) 0000:00:1f.0 ISA bridge: Intel Corp.: Unknown device 27b8 (rev 01) 0000:00:1f.1 IDE interface: Intel Corp.: Unknown device 27df (rev 01) 0000:00:1f.2 0106: Intel Corp.: Unknown device 27c1 (rev 01) 0000:00:1f.3 SMBus: Intel Corp.: Unknown device 27da (rev 01) 0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 00c1 (rev a2) 0000:05:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:05:04.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) 0000:05:04.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04) 0000:05:04.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) 0000:05:05.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61) 0000:05:08.0 Ethernet controller: Intel Corp.: Unknown device 27dc (rev 01) lspci -n 0000:00:00.0 0600: 8086:2770 0000:00:01.0 0604: 8086:2771 0000:00:1c.0 0604: 8086:27d0 (rev 01) 0000:00:1c.4 0604: 8086:27e0 (rev 01) 0000:00:1c.5 0604: 8086:27e2 (rev 01) 0000:00:1d.0 0c03: 8086:27c8 (rev 01) 0000:00:1d.1 0c03: 8086:27c9 (rev 01) 0000:00:1d.2 0c03: 8086:27ca (rev 01) 0000:00:1d.3 0c03: 8086:27cb (rev 01) 0000:00:1d.7 0c03: 8086:27cc (rev 01) 0000:00:1e.0 0604: 8086:244e (rev e1) 0000:00:1f.0 0601: 8086:27b8 (rev 01) 0000:00:1f.1 0101: 8086:27df (rev 01) 0000:00:1f.2 0106: 8086:27c1 (rev 01) 0000:00:1f.3 0c05: 8086:27da (rev 01) 0000:01:00.0 0300: 10de:00c1 (rev a2) 0000:05:02.0 0200: 10ec:8139 (rev 10) 0000:05:04.0 0401: 1102:0004 (rev 04) 0000:05:04.1 0980: 1102:7003 (rev 04) 0000:05:04.2 0c00: 1102:4001 (rev 04) 0000:05:05.0 0c00: 11c1:5811 (rev 61) 0000:05:08.0 0200: 8086:27dc (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [E] Comments/Problems: Config network: no route set (problem is already known and reported) I set it up manually Detect hard drives I have to select ahci manually Reboot: Kernel panic, I investigate a bit and found kernel 2.6.8 as not the ahci module in its initrd, so I went back to the installer and tried to configure second stage from first but it failed (do nothing without error reported), so I chrooted into /target, and I installed kernel 2.6.11 from unstable, then I reboot with new 2.6.11 kernel, but I got an error: whiptail [9606]: segfault at 0000000000000000 rip 00000000556f0f3b rsp 00000000ffffce98 error 4 a complain about menu/.mnu file not found and "Init: Id "1" respawning too fast", so I touched menu/.mnu in /usr/lib/base-config repository, and I went back to the installer, chrooted in /target and install whiptail from unstable, and I run base-config but it doesn't want to setup a French environment, I reboot it succeed! I upgraded all installed packages and lost aptitude due to a known dependency problem I don't have my French environment, but I'll try again this afternoon BTW: The onboard ethernet is not found Regards Nicolas -- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]