Package: linux-image-2.6-686
Version: 2.6.26+17+lenny1
Severity: important
I'm running Debian Lenny update 4 on a Fujitsu Siemens desktop computer.
I've 2 major problems.
First off all, the machine boots very slow.
I'm blind, so I'm unable to see what happends before the braille display
comes up.
And when it's comes up, everything works normal.
So, the problem must go away after the disk is mounted.
I'll include the dmesg later in this report.
Another strange thing:
I've a Nec internal IDE DVD-RW drive in this machine as hdc, and it
doesn't appear in /dev, and is then unusalbe.
But, it appears in the dmesg.
This version of the Linux kernel and debian is the only OS these
problems appear.
In Debian 4.0, and other Linux distros I've used on this machine, they
didn't exist.
So, I think these problems have something to do with this kernel
version/this version of Debian.
Here's the dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21lenny4)
(da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25))
#1 SMP Tue Mar 9 17:35:51 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fefc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fefc000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 000000003ff80000 (usable)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262016) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262016
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262016
[ 0.000000] On node 0 totalpages: 262016
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32385 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F76E0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3FEF9112, 0030 (r1 PTLTD RSDT 6040001 LTP
0)
[ 0.000000] ACPI: FACP 3FEF9142, 0074 (r1 FSC D138X 6040001
F4240)
[ 0.000000] ACPI: DSDT 3FEF91B6, 2DC8 (r1 FSC D138X 6040001 MSFT
100000D)
[ 0.000000] ACPI: FACS 3FEFCFC0, 0040
[ 0.000000] ACPI: APIC 3FEFBF7E, 005A (r1 FSC APIC 6040001 CSF
0)
[ 0.000000] ACPI: BOOT 3FEFBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040001 LTP
1)
[ 0.000000] ACPI: DMI detected: Fujitsu Siemens
[ 0.000000] ACPI: PM-Timer IO Port: 0xf008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 259969
[ 0.000000] Kernel command line: root=/dev/hda1 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1794.756 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1028968k/1048064k available (1771k kernel code, 18332k
reserved, 750k data, 244k init, 130496k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02bac75 - 0xc0376620 ( 750 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02bac75 (1771 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084204] Calibrating delay using timer specific routine.. 3594.57
BogoMIPS (lpj=7189150)
[ 0.084271] Security Framework initialized
[ 0.084285] SELinux: Disabled at boot.
[ 0.084291] Capability LSM initialized
[ 0.084318] Mount-cache hash table entries: 512
[ 0.084604] Initializing cgroup subsys ns
[ 0.084613] Initializing cgroup subsys cpuacct
[ 0.084617] Initializing cgroup subsys devices
[ 0.084652] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.084657] CPU: L2 cache: 512K
[ 0.084662] CPU: Hyper-Threading is disabled
[ 0.084667] Intel machine check architecture supported.
[ 0.084676] Intel machine check reporting enabled on CPU#0.
[ 0.084681] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.084688] CPU0: Thermal monitoring enabled
[ 0.084714] Checking 'hlt' instruction... OK.
[ 0.100706] SMP alternatives: switching to UP code
[ 0.114016] Freeing SMP alternatives: 16k freed
[ 0.114024] ACPI: Core revision 20080321
[ 0.123696] ENABLING IO-APIC IRQs
[ 0.123899] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.163604] CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04
[ 0.164010] Brought up 1 CPUs
[ 0.164010] Total of 1 processors activated (3594.57 BogoMIPS).
[ 0.164010] CPU0 attaching sched-domain:
[ 0.164010] domain 0: span 0
[ 0.164010] groups: 0
[ 0.164010] net_namespace: 660 bytes
[ 0.164010] Booting paravirtualized kernel on bare hardware
[ 0.164010] NET: Registered protocol family 16
[ 0.164010] ACPI: bus type pci registered
[ 0.188011] PCI: PCI BIOS revision 2.10 entry at 0xfd987, last bus=2
[ 0.188011] PCI: Using configuration type 1 for base access
[ 0.188011] Setting up standard PCI resources
[ 0.200576] ACPI: EC: Look up EC in DSDT
[ 0.204625] ACPI: Interpreter enabled
[ 0.204630] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.204657] ACPI: Using IOAPIC for interrupt routing
[ 0.208552] ACPI: Device [PS2M] status [00000008]: functional but not
present; setting present
[ 0.209186] ACPI: Device [LPT] status [00000008]: functional but not
present; setting present
[ 0.210543] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.211080] * The chipset may have PM-Timer Bug. Due to workarounds for a
bug,
[ 0.211083] * this clock source is slow. If you are sure your timer does not
have
[ 0.211085] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.211143] pci 0000:00:1f.0: quirk: region f000-f07f claimed by ICH4
ACPI/GPIO/TCO
[ 0.211149] pci 0000:00:1f.0: quirk: region f180-f1bf claimed by ICH4 GPIO
[ 0.211936] PCI: Transparent bridge - 0000:00:1e.0
[ 0.211967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.212364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.212517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
[ 0.216536] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 0.216716] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 0.216892] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 0.217066] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 0.217240] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 0.217389] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.217538] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 0.217713] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 0.217980] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.218033] pnp: PnP ACPI init
[ 0.218046] ACPI: bus type pnp registered
[ 0.221803] pnp: PnP ACPI: found 14 devices
[ 0.221808] ACPI: ACPI bus type pnp unregistered
[ 0.221816] PnPBIOS: Disabled by ACPI PNP
[ 0.222246] PCI: Using ACPI for IRQ routing
[ 0.222538] ACPI: RTC can wake from S4
[ 0.222584] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.222589] system 00:02: ioport range 0xf000-0xf07f has been reserved
[ 0.222594] system 00:02: ioport range 0xf100-0xf10f has been reserved
[ 0.222598] system 00:02: ioport range 0xf180-0xf1bf has been reserved
[ 0.222603] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.222607] system 00:02: ioport range 0xf820-0xf82f has been reserved
[ 0.222611] system 00:02: ioport range 0xfe00-0xfe00 has been reserved
[ 0.253283] PCI: Failed to allocate mem resource #6:10...@f2000000 for
0000:01:00.0
[ 0.253342] PCI: Bridge: 0000:00:01.0
[ 0.253345] IO window: disabled.
[ 0.253352] MEM window: 0xd1000000-0xd1ffffff
[ 0.253358] PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
[ 0.253369] PCI: Bridge: 0000:00:1e.0
[ 0.253373] IO window: 3000-4fff
[ 0.253380] MEM window: 0xd2000000-0xd20fffff
[ 0.253386] PREFETCH window: 0x0000000050000000-0x00000000500fffff
[ 0.253411] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.253449] NET: Registered protocol family 2
[ 0.253619] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.254132] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.255505] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.256453] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.256459] TCP reno registered
[ 0.256685] NET: Registered protocol family 1
[ 0.256895] checking if image is initramfs... it is
[ 0.756029] Switched to high resolution mode on CPU 0
[ 1.100960] Freeing initrd memory: 6037k freed
[ 1.101228] Simple Boot Flag at 0x69 set to 0x1
[ 1.101973] audit: initializing netlink socket (disabled)
[ 1.101999] type=2000 audit(1270425839.100:1): initialized
[ 1.102241] highmem bounce pool size: 64 pages
[ 1.102250] Total HugeTLB memory allocated, 0
[ 1.102362] VFS: Disk quotas dquot_6.5.1
[ 1.102404] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.102465] msgmni has been set to 1767
[ 1.102640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 1.102646] io scheduler noop registered
[ 1.102650] io scheduler anticipatory registered
[ 1.102653] io scheduler deadline registered
[ 1.102670] io scheduler cfq registered (default)
[ 1.102783] pci 0000:01:00.0: Boot video device
[ 1.102824] pci 0000:02:08.0: Firmware left e100 interrupts enabled;
disabling
[ 1.103402] isapnp: Scanning for PnP cards...
[ 1.457849] isapnp: No Plug & Play device found
[ 1.462086] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 1.462246] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.462396] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.463033] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.463267] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.466203] brd: module loaded
[ 1.466319] i8042 aux: probe of 00:08 failed with error -16
[ 1.466376] PNP: PS/2 Controller [PNP0303:KEYB] at 0x60,0x64 irq 1
[ 1.466381] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 1.466921] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.467119] mice: PS/2 mouse device common for all mice
[ 1.467304] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.467327] rtc0: alarms up to one month, y3k
[ 1.467387] cpuidle: using governor ladder
[ 1.467391] cpuidle: using governor menu
[ 1.467399] No iBFT detected.
[ 1.468159] TCP cubic registered
[ 1.468165] NET: Registered protocol family 17
[ 1.468175] Using IPI No-Shortcut mode
[ 1.468374] registered taskstats version 1
[ 1.468590] rtc_cmos 00:04: setting system clock to 2010-04-05 00:04:00 UTC
(1270425840)
[ 1.468945] Freeing unused kernel memory: 244k freed
[ 1.487732] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.621139] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.428966] usbcore: registered new interface driver usbfs
[ 2.429013] usbcore: registered new interface driver hub
[ 2.429068] usbcore: registered new device driver usb
[ 2.438212] USB Universal Host Controller Interface driver v3.0
[ 2.438286] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 2.438305] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.438312] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.438494] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 2.438534] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000
[ 2.438664] usb usb1: configuration #1 chosen from 1 choice
[ 2.438714] hub 1-0:1.0: USB hub found
[ 2.438729] hub 1-0:1.0: 2 ports detected
[ 2.506048] No dock devices found.
[ 2.540243] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.540249] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.540254] usb usb1: Product: UHCI Host Controller
[ 2.540258] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.540261] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.540325] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 19
[ 2.540341] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.540347] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.540393] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 2.540436] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001400
[ 2.540561] usb usb2: configuration #1 chosen from 1 choice
[ 2.540610] hub 2-0:1.0: USB hub found
[ 2.540624] hub 2-0:1.0: 2 ports detected
[ 2.588076] SCSI subsystem initialized
[ 2.644215] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.644222] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.644227] usb usb2: Product: UHCI Host Controller
[ 2.644230] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.644234] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.644299] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 2.644314] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.644320] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.644359] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 2.644400] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001800
[ 2.644526] usb usb3: configuration #1 chosen from 1 choice
[ 2.644572] hub 3-0:1.0: USB hub found
[ 2.644587] hub 3-0:1.0: 2 ports detected
[ 2.660160] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 2.666614] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 2.666620] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.668093] libata version 3.00 loaded.
[ 2.748205] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.748212] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.748216] usb usb3: Product: UHCI Host Controller
[ 2.748220] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.748224] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.748411] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) ->
IRQ 23
[ 2.748436] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.748442] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.748482] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 4
[ 2.752410] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 2.752430] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0000000
[ 2.780077] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 2.792072] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 2.792216] usb usb4: configuration #1 chosen from 1 choice
[ 2.792272] hub 4-0:1.0: USB hub found
[ 2.792284] hub 4-0:1.0: 6 ports detected
[ 2.819975] Floppy drive(s): fd0 is 1.44M
[ 2.840265] FDC 0 is a post-1991 82077
[ 2.848076] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2.896195] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.896202] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.896207] usb usb4: Product: EHCI Host Controller
[ 2.896210] usb usb4: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 2.896214] usb usb4: SerialNumber: 0000:00:1d.7
[ 2.897767] ACPI: PCI Interrupt 0000:02:05.2[C] -> GSI 19 (level, low) ->
IRQ 19
[ 2.897791] ehci_hcd 0000:02:05.2: EHCI Host Controller
[ 2.897851] ehci_hcd 0000:02:05.2: new USB bus registered, assigned bus
number 5
[ 2.920079] ehci_hcd 0000:02:05.2: irq 19, io mem 0xd2003000
[ 2.932066] ehci_hcd 0000:02:05.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 2.932215] usb usb5: configuration #1 chosen from 1 choice
[ 2.932266] hub 5-0:1.0: USB hub found
[ 2.932283] hub 5-0:1.0: 5 ports detected
[ 3.036189] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.036196] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.036200] usb usb5: Product: EHCI Host Controller
[ 3.036204] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 3.036207] usb usb5: SerialNumber: 0000:02:05.2
[ 3.036258] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 3.036283] ohci_hcd 0000:02:05.0: OHCI Host Controller
[ 3.036325] ohci_hcd 0000:02:05.0: new USB bus registered, assigned bus
number 6
[ 3.036355] ohci_hcd 0000:02:05.0: irq 17, io mem 0xd2000000
[ 3.121928] usb usb6: configuration #1 chosen from 1 choice
[ 3.121979] hub 6-0:1.0: USB hub found
[ 3.121994] hub 6-0:1.0: 3 ports detected
[ 3.224161] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.224167] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.224171] usb usb6: Product: OHCI Host Controller
[ 3.224174] usb usb6: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 3.224177] usb usb6: SerialNumber: 0000:02:05.0
[ 3.224250] ACPI: PCI Interrupt 0000:02:05.1[B] -> GSI 18 (level, low) ->
IRQ 18
[ 3.224269] ohci_hcd 0000:02:05.1: OHCI Host Controller
[ 3.224317] ohci_hcd 0000:02:05.1: new USB bus registered, assigned bus
number 7
[ 3.224335] ohci_hcd 0000:02:05.1: irq 18, io mem 0xd2001000
[ 3.309923] usb usb7: configuration #1 chosen from 1 choice
[ 3.309975] hub 7-0:1.0: USB hub found
[ 3.309989] hub 7-0:1.0: 2 ports detected
[ 3.376038] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 3.412156] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.412161] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.412165] usb usb7: Product: OHCI Host Controller
[ 3.412168] usb usb7: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 3.412171] usb usb7: SerialNumber: 0000:02:05.1
[ 3.414837] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 3.414869] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 18 (level, low) ->
IRQ 18
[ 3.415333] eth0: RTL8110s at 0xf883e400, 00:08:a1:a8:44:39, XID 04000000
IRQ 18
[ 3.418155] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 3.442753] e100: eth1: e100_probe: addr 0xd2002000, irq 20, MAC addr
00:30:05:1e:92:5d
[ 3.454612] Uniform Multi-Platform E-IDE driver
[ 3.454621] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 3.455533] ICH4: IDE controller (0x8086:0x24cb rev 0x01) at PCI slot
0000:00:1f.1
[ 3.455547] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
[ 3.455557] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 18
[ 3.455573] ICH4: not 100% native mode: will probe irqs later
[ 3.455589] ide0: BM-DMA at 0x2800-0x2807
[ 3.455603] ide1: BM-DMA at 0x2808-0x280f
[ 3.455610] Probing IDE interface ide0...
[ 3.534496] usb 1-2: configuration #1 chosen from 1 choice
[ 3.537680] usb 1-2: New USB device found, idVendor=067b, idProduct=2303
[ 3.537687] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.744188] hda: ST340016A, ATA DISK drive
[ 4.024184] hdb: WDC WD800JB-00CRA1, ATA DISK drive
[ 4.080087] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.080441] hda: UDMA/100 mode selected
[ 4.080559] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.081396] hdb: UDMA/100 mode selected
[ 4.082244] Probing IDE interface ide1...
[ 4.480186] hdc: _NEC DVD_RW ND-4551A, ATAPI CD/DVD-ROM drive
[ 5.264186] hdd: Seagate STT20000A, ATAPI TAPE drive
[ 5.320067] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.320253] hdc: UDMA/33 mode selected
[ 5.320442] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.321304] hdd: Disabling (U)DMA for Seagate STT20000A (blacklisted)
[ 5.321313] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.322427] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.336003] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.402137] hda: max request size: 128KiB
[ 5.405767] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
[ 5.405775] hda: cache flushes not supported
[ 5.405833] hda: hda1 hda2
[ 5.443254] hdb: max request size: 128KiB
[ 5.444328] hdb: 156301488 sectors (80026 MB) w/8192KiB Cache,
CHS=65535/16/63
[ 5.444338] hdb: cache flushes not supported
[ 5.444396] hdb: hdb1
[ 5.456565] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 5.456579] Uniform CD-ROM driver Revision: 3.20
[ 5.462793] ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51�3��p3��
[ 185.530708] PM: Starting manual resume from disk
[ 185.610821] kjournald starting. Commit interval 5 seconds
[ 185.610844] EXT3-fs: mounted filesystem with ordered data mode.
[ 187.248751] udevd version 125 started
[ 188.421347] Linux agpgart interface v0.103
[ 188.446179] agpgart: Detected an Intel 830M Chipset.
[ 188.450179] agpgart: AGP aperture is 64M @ 0xe0000000
[ 188.466283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 188.473383] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 188.723458] usbcore: registered new interface driver usbserial
[ 188.723482] usbserial: USB Serial support registered for generic
[ 188.723523] usbcore: registered new interface driver usbserial_generic
[ 188.723527] usbserial: USB Serial Driver core
[ 188.755872] usbserial: USB Serial support registered for pl2303
[ 188.755910] pl2303 1-2:1.0: pl2303 converter detected
[ 188.796776] usb 1-2: pl2303 converter now attached to ttyUSB0
[ 188.796803] usbcore: registered new interface driver pl2303
[ 188.796808] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 189.038967] input: Power Button (FF) as /class/input/input1
[ 189.065155] ACPI: Power Button (FF) [PWRF]
[ 189.065265] input: Power Button (CM) as /class/input/input2
[ 189.096682] ACPI: Power Button (CM) [PWRB]
[ 189.945517] intel_rng: FWH not detected
[ 190.367478] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) ->
IRQ 17
[ 190.506669] input: PC Speaker as /class/input/input3
[ 190.557149] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) ->
IRQ 17
[ 190.557183] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 190.984038] intel8x0_measure_ac97_clock: measured 54601 usecs
[ 190.984045] intel8x0: clocking to 48000
[ 190.985169] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 19 (level, low) ->
IRQ 19
[ 191.151836] parport_pc 00:0a: activated
[ 191.151843] parport_pc 00:0a: reported by Plug and Play ACPI
[ 191.151871] parport0: PC-style at 0x278, irq 5 [PCSPP,EPP]
[ 191.248147] parport_pc 00:0b: reported by Plug and Play ACPI
[ 191.248312] parport_pc 00:0b: disabled
[ 368.084771] Adding 996020k swap on /dev/hda2. Priority:-1 extents:1
across:996020k
[ 368.382070] EXT3 FS on hda1, internal journal
[ 368.652855] loop: module loaded
[ 369.543781] kjournald starting. Commit interval 5 seconds
[ 369.548120] EXT3 FS on hdb1, internal journal
[ 369.548127] EXT3-fs: mounted filesystem with ordered data mode.
[ 370.612971] NET: Registered protocol family 10
[ 370.613685] lo: Disabled Privacy Extensions
[ 370.711962] r8169: eth0: link up
[ 380.164607] warning: `proftpd' uses 32-bit capabilities (legacy support in
use)
[ 381.364008] eth0: no IPv6 routers present
-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=nb_NO.UTF-8, LC_CTYPE=nb_NO.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6-686 depends on:
ii linux-image-2.6.26-2-686 2.6.26-21lenny4 Linux 2.6.26 image on PPro/Celeron
linux-image-2.6-686 recommends no packages.
linux-image-2.6-686 suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
