severity 514459 important found 514459 2.6.32-10 thanks
I'm not sure about the severity, so feel free to change it :) I've just upgraded to 2.6.32-10 and it does not boot. The problema is that /etc/crypttab is not updated to use the UUID (or some other way that identifies the disk, not /dev/hdX because with the new kernel that's not the name anymore). I've installed my PC using the debian installer's guided setup to encrypt the fs, nothing custom. So I think the upgrade should be smooth. To make that kernel boot, I just change the device in /etc/crypttab to use the UUID and then just "update-initramfs -u". So if /etc/crypttab is also updated during the upgrade, I think this issue should be solved. Let me know if you want me to test something or if I can help in any way Thanks a lot, Rodrigo -- Package-specific info: ** Version: Linux version 2.6.32-4-686 (Debian 2.6.32-10) (m...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 17:16:41 UTC 2010 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-4-686 root=/dev/mapper/Debian-root ro rootflags=data=writeback ** Not tainted ** Kernel log: [ 13.431397] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.431484] usb usb3: Product: UHCI Host Controller [ 13.431548] usb usb3: Manufacturer: Linux 2.6.32-4-686 uhci_hcd [ 13.431616] usb usb3: SerialNumber: 0000:00:1d.1 [ 13.432088] usb usb3: configuration #1 chosen from 1 choice [ 13.432226] hub 3-0:1.0: USB hub found [ 13.432294] hub 3-0:1.0: 2 ports detected [ 13.432641] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 13.432715] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 13.432720] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 13.432791] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 13.432916] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 13.433017] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 13.433086] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.433174] usb usb4: Product: UHCI Host Controller [ 13.433238] usb usb4: Manufacturer: Linux 2.6.32-4-686 uhci_hcd [ 13.433304] usb usb4: SerialNumber: 0000:00:1d.2 [ 13.434107] usb usb4: configuration #1 chosen from 1 choice [ 13.434251] hub 4-0:1.0: USB hub found [ 13.434320] hub 4-0:1.0: 2 ports detected [ 13.434436] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 13.434511] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 13.434515] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 13.434585] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 13.434707] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 [ 13.434810] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 13.434879] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.434967] usb usb5: Product: UHCI Host Controller [ 13.435031] usb usb5: Manufacturer: Linux 2.6.32-4-686 uhci_hcd [ 13.435097] usb usb5: SerialNumber: 0000:00:1d.3 [ 13.435327] usb usb5: configuration #1 chosen from 1 choice [ 13.435457] hub 5-0:1.0: USB hub found [ 13.435525] hub 5-0:1.0: 2 ports detected [ 13.745895] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x204000 [ 13.776067] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 14.111515] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 14.111612] ACPI: I/O resource 0000:00:1f.3 [0x20a0-0x20bf] conflicts with ACPI region SMBI [0x20a0-0x20af] [ 14.111706] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.111924] 8139too Fast Ethernet driver 0.9.28 [ 14.112036] 8139too 0000:06:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 14.113897] eth0: RealTek RTL8139 at 0x3000, 00:16:d3:41:c8:81, IRQ 20 [ 14.189270] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 14.189343] Uniform CD-ROM driver Revision: 3.20 [ 14.189668] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 14.296737] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 14.296812] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketr...@linux.intel.com> [ 14.297025] [drm] Initialized drm 1.1.0 20060810 [ 14.375582] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 14.753967] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.754361] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 14.754450] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 14.754599] ipw2200 0000:06:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.754755] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 14.754834] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 14.754956] ipw2200 0000:06:05.0: firmware: requesting ipw2200-bss.fw [ 14.769590] acer-wmi: Acer Laptop ACPI-WMI Extras [ 14.816612] Registered led device: acer-wmi::mail [ 15.135218] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.135297] i915 0000:00:02.0: setting latency timer to 64 [ 15.141390] [drm] set up 7M of stolen space [ 15.413988] [drm] initialized overlay support [ 15.837777] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 15.837898] yenta_cardbus 0000:06:09.0: CardBus bridge found [1025:006a] [ 15.837992] yenta_cardbus 0000:06:09.0: Using CSCINT to route CSC interrupts to PCI [ 15.838081] yenta_cardbus 0000:06:09.0: Routing CardBus interrupts to PCI [ 15.838153] yenta_cardbus 0000:06:09.0: TI: mfunc 0x00001022, devctl 0x44 [ 16.068907] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0cf8, PCI irq 22 [ 16.068983] yenta_cardbus 0000:06:09.0: Socket status: 30000006 [ 16.069051] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a [ 16.069149] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 16.069241] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean. [ 16.069607] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff [ 16.069700] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff [ 16.498772] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 16.500508] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 16.501231] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 16.501829] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 16.502583] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 16.555165] Console: switching to colour frame buffer device 160x50 [ 16.562704] fb0: inteldrmfb frame buffer device [ 16.562754] registered panic notifier [ 16.563125] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 16.563259] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 16.563368] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 17.388035] intel8x0_measure_ac97_clock: measured 55329 usecs (2666 samples) [ 17.388122] intel8x0: clocking to 48000 [ 17.389290] Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 17.389396] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64 [ 17.492054] MC'97 1 converters and GPIO not ready (0xff00) [ 19.072910] EXT3 FS on dm-1, internal journal [ 20.284945] Adding 2170872k swap on /dev/mapper/Debian-swap_1. Priority:-1 extents:1 across:2170872k [ 146.180959] kjournald starting. Commit interval 5 seconds [ 146.184259] EXT3 FS on dm-3, internal journal [ 146.186651] EXT3-fs: mounted filesystem with writeback data mode. [ 147.249077] loop: module loaded [ 148.409127] fuse init (API version 7.13) [ 164.228611] eth0: link down [ 164.232385] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 174.716024] eth1: no IPv6 routers present [ 422.475107] lib80211_crypt: registered algorithm 'CCMP' ** Model information not available ** Loaded modules: Module Size Used by lib80211_crypt_ccmp 3643 2 autofs4 16667 0 acpi_cpufreq 4943 0 cpufreq_conservative 4018 0 cpufreq_stats 1940 0 cpufreq_powersave 602 0 cpufreq_userspace 1480 0 fuse 43758 1 loop 9757 0 ext2 46293 1 pcmcia 17442 0 snd_intel8x0m 8100 0 snd_intel8x0 19523 2 snd_ac97_codec 79140 2 snd_intel8x0m,snd_intel8x0 snd_seq_midi 3576 0 i915 220272 2 ac97_bus 710 1 snd_ac97_codec snd_rawmidi 12505 1 snd_seq_midi snd_pcm_oss 28671 0 snd_seq_midi_event 3684 1 snd_seq_midi snd_mixer_oss 10461 1 snd_pcm_oss acer_wmi 11072 0 yenta_socket 16403 1 snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event drm_kms_helper 18297 1 i915 sg 15964 0 ipw2200 108368 0 8139cp 13421 0 snd_pcm 47210 5 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq rsrc_nonstatic 7057 1 yenta_socket rfkill 10264 1 acer_wmi libipw 18439 1 ipw2200 joydev 6771 0 drm 112200 3 i915,drm_kms_helper sr_mod 10770 0 i2c_i801 6442 0 8139too 14949 0 snd_timer 12258 3 snd_seq,snd_pcm uhci_hcd 16057 0 ehci_hcd 27582 0 cdrom 26487 1 sr_mod i2c_algo_bit 3497 1 i915 usbcore 98162 3 uhci_hcd,ehci_hcd psmouse 44413 0 snd 34363 12 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_pcm,snd_seq_device,snd_timer soundcore 3450 1 snd i2c_core 12648 5 i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit mii 2714 2 8139cp,8139too lib80211 2870 3 lib80211_crypt_ccmp,ipw2200,libipw nls_base 4541 1 usbcore pcspkr 1207 0 video 14605 1 i915 pcmcia_core 20450 3 pcmcia,yenta_socket,rsrc_nonstatic snd_page_alloc 5045 3 snd_intel8x0m,snd_intel8x0,snd_pcm serio_raw 2916 0 evdev 5609 15 rng_core 2178 0 output 1204 1 video battery 3782 0 led_class 1757 1 acer_wmi processor 26599 2 acpi_cpufreq button 3598 1 i915 wmi 3575 1 acer_wmi ac 1640 0 ext3 94200 2 jbd 32169 1 ext3 mbcache 3762 2 ext2,ext3 sha256_generic 10748 2 aes_i586 6816 4 aes_generic 25738 1 aes_i586 cbc 2047 1 dm_crypt 9127 1 dm_mod 46078 12 dm_crypt sd_mod 25785 3 crc_t10dif 1012 1 sd_mod thermal 9206 0 fan 2586 0 thermal_sys 9378 4 video,processor,thermal,fan ata_generic 2015 0 ata_piix 17133 3 libata 114416 2 ata_generic,ata_piix scsi_mod 101305 4 sg,sr_mod,sd_mod,libata ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1800 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at b0000000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at 44000000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: <access denied> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: b0100000-b01fffff Prefetchable memory behind bridge: 0000000040000000-0000000043ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03) Subsystem: Acer Incorporated [ALI] Realtek ALC 655 codec (in Acer TravelMate 2410 serie laptop) [1025:006a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at b0040800 (32-bit, non-prefetchable) [size=512] Region 3: Memory at b0040400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03) (prog-if 00 [Generic]) Subsystem: Acer Incorporated [ALI] Conexant AC'97 CoDec (in Acer TravelMate 2410 serie laptop) [1025:006a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH Modem 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 20a0 [size=32] 06:05.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation Device [8086:2701] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 06:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 3000 [size=256] Region 1: Memory at b0101000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too 06:09.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) Subsystem: Acer Incorporated [ALI] Device [1025:006a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at b0102000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 40000000-43fff000 (prefetchable) Memory window 1: 48000000-4bfff000 I/O window 0: 00003400-000034ff I/O window 1: 00003800-000038ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus ** USB devices: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (500, 'stable'), (400, 'unstable'), (200, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.32-4-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-4-686 depends on: ii debconf [debconf-2.0] 1.5.30 Debian configuration management sy ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs ii linux-base 2.6.32-10 Linux image base package ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-4-686 recommends: ii firmware-linux-free 2.6.32-9 Binary firmware for various driver ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-4-686 suggests: ii grub 0.97-59 GRand Unified Bootloader (dummy pa pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-4-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) ii firmware-ipw2x00 0.23 Binary firmware for Intel Pro Wire pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.23 Binary firmware for various driver ii firmware-linux-nonfree 0.23 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-4-686/prerm/would-invalidate-boot-loader-2.6.32-4-686: true linux-image-2.6.32-4-686/postinst/bootloader-test-error-2.6.32-4-686: linux-image-2.6.32-4-686/postinst/depmod-error-initrd-2.6.32-4-686: false linux-image-2.6.32-4-686/postinst/bootloader-error-2.6.32-4-686: linux-image-2.6.32-4-686/postinst/missing-firmware-2.6.32-4-686: linux-image-2.6.32-4-686/prerm/removing-running-kernel-2.6.32-4-686: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org