Package: linux-2.6 Version: 2.6.32-9 Severity: normal Tags: sid The webcam genius videocam messenger (ID 0c45:602e Microdia VideoCAM Messenger) works with the gspca_sonixb module, not with the sn9c102 module. The image with the sn9c102 module is really dark. Is not posible to enable the gspca_sonixb module because is disabled from kernel source as i can see in sonixb.c #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, #endif
-- Package-specific info: ** Version: Linux version 2.6.32-3-686 (Debian 2.6.32-9) (m...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:14:20 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-686 root=/dev/hda1 ro ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [ 3730.939417] usb 1-2: V4L2 device /dev/video0 deregistered [ 3750.111544] gspca: main v2.7.0 registered [ 3750.175923] usbcore: registered new interface driver sonixb [ 3750.177101] sonixb: registered [ 4133.763174] usbcore: deregistering interface driver sonixb [ 4133.764795] sonixb: deregistered [ 4133.766358] gspca: main deregistered [ 4161.184700] gspca: main v2.7.0 registered [ 4161.186260] gspca_sonixb: Unknown parameter `help' [ 4180.152724] sn9c102: Unknown parameter `help' [ 4187.176585] sn9c102: Unknown parameter `gamma' [ 4282.740797] sn9c102: Unknown parameter `--help' [ 4361.241805] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49 [ 4361.243801] usb 1-2: SN9C10[12] PC Camera Controller detected (vid:pid 0x0C45:0x602E) [ 4361.396768] usb 1-2: [sn9c102_i2c_try_raw_write:468] I2C write failed for MT9V111 image sensor [ 4361.531769] usb 1-2: OV7630 image sensor detected [ 4361.531780] usb 1-2: [sn9c102_usb_probe:3311] Support for OV7630 maintained by Luca Risolia <luca.riso...@studio.unibo.it> [ 4361.816714] usb 1-2: [sn9c102_init:1684] Compressed video format is active, quality 1 [ 4361.831721] usb 1-2: [sn9c102_init:1707] Image sensor supports 'global gain' control [ 4361.840706] usb 1-2: [sn9c102_init:1707] Image sensor supports 'exposure' control [ 4361.849702] usb 1-2: [sn9c102_init:1707] Image sensor supports 'white balance background: red' control [ 4361.858702] usb 1-2: [sn9c102_init:1707] Image sensor supports 'white balance background: blue' control [ 4361.861703] usb 1-2: [sn9c102_init:1707] Image sensor supports 'red balance' control [ 4361.864701] usb 1-2: [sn9c102_init:1707] Image sensor supports 'blue balance' control [ 4361.873700] usb 1-2: [sn9c102_init:1707] Image sensor supports 'auto adjust' control [ 4361.882710] usb 1-2: [sn9c102_init:1707] Image sensor supports 'vertical flip' control [ 4361.885701] usb 1-2: [sn9c102_init:1707] Image sensor supports 'green balance' control [ 4361.894706] usb 1-2: [sn9c102_init:1707] Image sensor supports 'band filter' control [ 4361.903699] usb 1-2: [sn9c102_init:1707] Image sensor supports 'rgb gamma' control [ 4361.903712] usb 1-2: Initialization succeeded [ 4361.903901] usb 1-2: V4L2 device registered as /dev/video0 [ 4361.903905] usb 1-2: Optional device control through 'sysfs' interface disabled [ 4361.903909] usb 1-2: [sn9c102_usb_probe:3368] Compile the kernel with the 'CONFIG_VIDEO_ADV_DEBUG' configuration option to enable it. [ 4361.903945] usbcore: registered new interface driver sn9c102 [ 4361.913828] usb 1-2: [sn9c102_open:1848] Video device /dev/video0 is open [ 4361.913849] sn9c102: VIDIOC_QUERYCAP [ 4361.917763] usb 1-2: [sn9c102_release:1873] Video device /dev/video0 closed [ 4361.969941] usb 1-2: [sn9c102_open:1848] Video device /dev/video0 is open [ 4361.969961] sn9c102: VIDIOC_QUERYCAP [ 4361.974856] usb 1-2: [sn9c102_release:1873] Video device /dev/video0 closed [ 4394.743263] usbcore: deregistering interface driver sn9c102 [ 4394.743307] usb 1-2: Disconnecting SN9C1xx PC Camera... [ 4394.743311] usb 1-2: V4L2 device /dev/video0 deregistered [ 4400.941855] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49 [ 4400.943792] usb 1-2: SN9C10[12] PC Camera Controller detected (vid:pid 0x0C45:0x602E) [ 4401.231761] usb 1-2: OV7630 image sensor detected [ 4401.603698] usb 1-2: Initialization succeeded [ 4401.605496] usb 1-2: V4L2 device registered as /dev/video0 [ 4401.605506] usb 1-2: Optional device control through 'sysfs' interface disabled [ 4401.605588] usbcore: registered new interface driver sn9c102 [ 4410.723191] usbcore: deregistering interface driver sn9c102 [ 4410.723235] usb 1-2: Disconnecting SN9C1xx PC Camera... [ 4410.723239] usb 1-2: V4L2 device /dev/video0 deregistered [ 4520.544334] gspca: main deregistered [ 5684.033193] gspca: main v2.7.0 registered [ 5684.035845] usbcore: registered new interface driver sonixb [ 5684.036879] sonixb: registered [ 5706.032048] usbcore: deregistering interface driver sonixb [ 5706.033479] sonixb: deregistered [ 5706.034758] gspca: main deregistered [ 6331.615166] usb 1-2: USB disconnect, address 2 [ 6338.372037] usb 1-2: new full speed USB device using ohci_hcd and address 3 [ 6338.552039] usb 1-2: device descriptor read/64, error -62 [ 6338.836029] usb 1-2: device descriptor read/64, error -62 [ 6339.116036] usb 1-2: new full speed USB device using ohci_hcd and address 4 [ 6339.296043] usb 1-2: device descriptor read/64, error -62 [ 6339.580047] usb 1-2: device descriptor read/64, error -62 [ 6339.860029] usb 1-2: new full speed USB device using ohci_hcd and address 5 [ 6340.268022] usb 1-2: device not accepting address 5, error -62 [ 6340.444030] usb 1-2: new full speed USB device using ohci_hcd and address 6 [ 6340.852021] usb 1-2: device not accepting address 6, error -62 [ 6340.852060] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 6360.884030] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 6361.064041] usb 3-1: device descriptor read/64, error -62 [ 6361.348033] usb 3-1: device descriptor read/64, error -62 [ 6361.628040] usb 3-1: new full speed USB device using ohci_hcd and address 3 [ 6361.808282] usb 3-1: device descriptor read/64, error -62 [ 6362.092031] usb 3-1: device descriptor read/64, error -62 [ 6362.372033] usb 3-1: new full speed USB device using ohci_hcd and address 4 [ 6362.780040] usb 3-1: device not accepting address 4, error -62 [ 6362.956035] usb 3-1: new full speed USB device using ohci_hcd and address 5 [ 6363.364025] usb 3-1: device not accepting address 5, error -62 [ 6363.364063] hub 3-0:1.0: unable to enumerate USB device on port 1 [ 6383.500048] usb 1-2: new full speed USB device using ohci_hcd and address 7 [ 6383.709971] usb 1-2: New USB device found, idVendor=0c45, idProduct=602e [ 6383.709980] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6383.709983] usb 1-2: Product: USB camera [ 6383.710203] usb 1-2: configuration #1 chosen from 1 choice [ 6383.765147] gspca: main v2.7.0 registered [ 6383.767726] usbcore: registered new interface driver sonixb [ 6383.768859] sonixb: registered [ 6446.595276] usbcore: deregistering interface driver sonixb [ 6446.596969] sonixb: deregistered [ 6446.598487] gspca: main deregistered [ 7148.244281] gspca: main v2.7.0 registered [ 7148.247045] usbcore: registered new interface driver sonixb [ 7148.247727] sonixb: registered [ 7159.924981] usbcore: deregistering interface driver sonixb [ 7159.925841] sonixb: deregistered [ 7159.926946] gspca: main deregistered ** Model information not available ** Loaded modules: Module Size Used by ppdev 4058 0 lp 5570 0 fuse 43750 1 loop 9753 0 tuner_simple 9694 1 tuner_types 7537 1 tuner_simple snd_intel8x0 19523 2 tea5767 4529 0 snd_ac97_codec 79140 1 snd_intel8x0 ac97_bus 710 1 snd_ac97_codec tuner 14428 1 snd_pcm_oss 28671 0 snd_mixer_oss 10461 2 snd_pcm_oss snd_pcm 47362 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_midi 3576 0 snd_rawmidi 12505 1 snd_seq_midi snd_seq_midi_event 3684 1 snd_seq_midi snd_seq 35459 2 snd_seq_midi,snd_seq_midi_event saa7134 119996 0 ir_common 22187 1 saa7134 snd_timer 12258 2 snd_pcm,snd_seq v4l2_common 9816 2 tuner,saa7134 snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq videodev 25541 3 tuner,saa7134,v4l2_common snd 34363 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device v4l1_compat 10250 1 videodev videobuf_dma_sg 7199 1 saa7134 videobuf_core 10476 2 saa7134,videobuf_dma_sg ns558 1599 0 tveeprom 9393 1 saa7134 psmouse 44413 0 evdev 5609 9 gameport 6057 2 ns558 serio_raw 2916 0 parport_pc 15799 1 parport 22554 3 ppdev,lp,parport_pc soundcore 3450 2 snd i2c_sis96x 2553 0 processor 26571 0 shpchp 21220 0 pcspkr 1207 0 pci_hotplug 18065 1 shpchp snd_page_alloc 5041 2 snd_intel8x0,snd_pcm ext4 254909 1 mbcache 3762 1 ext4 jbd2 56059 1 ext4 crc16 1027 1 ext4 ide_cd_mod 21076 0 cdrom 26487 1 ide_cd_mod ide_gd_mod 17171 3 ide_pci_generic 1924 0 ata_generic 2015 0 libata 114408 1 ata_generic scsi_mod 101297 1 libata ohci_hcd 16904 0 ehci_hcd 27574 0 nvidia 8783321 28 sis900 13795 0 sis5513 4888 2 sis_agp 3145 1 floppy 40923 0 i2c_core 12648 9 tuner_simple,tea5767,tuner,saa7134,v4l2_common,videodev,tveeprom,i2c_sis96x,nvidia button 3598 0 mii 2714 1 sis900 usbcore 98126 3 ohci_hcd,ehci_hcd nls_base 4541 1 usbcore ide_core 64146 4 ide_cd_mod,ide_gd_mod,ide_pci_generic,sis5513 agpgart 19516 2 nvidia,sis_agp thermal 9206 0 fan 2586 0 thermal_sys 9378 3 processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 741/741GX/M741 Host [1039:0741] (rev 03) Subsystem: ASRock Incorporation Device [1849:0741] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-sis 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) [1039:0003] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=00, secondary=01, subordinate=02, sec-latency=32 Memory behind bridge: cbd00000-cfefffff Prefetchable memory behind bridge: aba00000-cbbfffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] [1039:0963] (rev 25) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 0 Region 4: I/O ports at 0c00 [size=32] 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (prog-if 80 [Master]) Subsystem: ASRock Incorporation Device [1849:5513] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: SIS_IDE 00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0) Subsystem: ASRock Incorporation Device [1849:7012] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at dc00 [size=256] Region 1: I/O ports at d800 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Device [1849:7001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at cfffd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Device [1849:7001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at cfffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI]) Subsystem: ASRock Incorporation Device [1849:7002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max) Interrupt: pin D routed to IRQ 23 Region 0: Memory at cffff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 90) Subsystem: ASRock Incorporation Device [1849:0900] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at d400 [size=256] Region 1: Memory at cfffc000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at 30000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sis900 00:0a.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01) Subsystem: Device [1a7f:2004] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (21000ns min, 8000ns max) Interrupt: pin A routed to IRQ 18 Region 0: Memory at cfffbc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: saa7134 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44A [GeForce 6200] [10de:0221] (rev a1) (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Device [1682:2156] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at b0000000 (32-bit, prefetchable) [size=256M] Region 2: Memory at cd000000 (32-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at cfee0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia ** USB devices: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 007: ID 0c45:602e Microdia VideoCAM Messenger Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-3-686 (SMP w/1 CPU core) Locale: LANG=es_CO.UTF-8, LC_CTYPE=es_CO.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-3-686 depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-3-686 recommends: pn firmware-linux-free <none> (no description available) pn libc6-i686 <none> (no description available) Versions of packages linux-image-2.6.32-3-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-3-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org