Package: Debian Squeeze
Version: sheevaplug latest
I followed the install guide to setup Debian Squeeze on a sheevaplug.
When I try to create an ext3 or ext4 the procedure will fail. Ext2
does work!
Here's the transcript:
┌───────────────────────┤ [!!] Partition disks ├───────────────────────┐
│ │
│ If you continue, the changes listed below will be written to the │
│ disks. Otherwise, you will be able to make further changes manually. │
│ │
│ WARNING: This will destroy all data on any partitions you have │
│ removed as well as on the partitions that are going to be formatted. │
│ │
│ The partition tables of the following devices are changed: │
│ MMC/SD card #1 (mmcblk0) │
│ │
│ The following partitions are going to be formatted: │
│ partition #2 of MMC/SD card #1 (mmcblk0) as ext4 │
│ partition #1 of SCSI1 (0,0,0) (sda) as ext4 │
│ │
│ Write the changes to disks? │
│ │
│ <Yes> <No> │
│ │
└──────────────────────────────────────────────────────────────────────┘
┌─────────────────────┤ [!!] Partition disks ├─────────────────────┐
│ │
│ Failed to create a file system │
│ The ext4 file system creation in partition #2 of MMC/SD card #1 │
│ (mmcblk0) failed. │
│ │
│ <Go Back> <Continue> │
│ │
└──────────────────────────────────────────────────────────────────┘
I am using the packages from
http://www.cyrius.com/debian/kirkwood/sheevaplug/install.html and the
latest uboot from
http://www.cyrius.com/debian/kirkwood/sheevaplug/uboot-upgrade.html
All software is downloaded today.
