On Sun, Jun 13, 2010 at 08:45:19PM +0200, Peter Palfrader wrote: > | Set name-type for VLAN subsystem.[ 30.676029] Virtual device eth0.221 > asks to queue packet! > | Should be visib[ 30.802271] BUG: unable to handle kernel le in > /proc/net/paging requestvlan/config > | Add at 00000000815eab98 > | ed VLAN with VID[ 30.806244] IP: == 221 to IF -: [<ffffffff812b7581>] > ip6_output2+0x2c/0x28b > | eth0:- > | [ 30.806244] PGD 0 > | [ 30.806244] Thread overran stack, or stack corrupted
Okay, this is already bad. > | [ 30.806244] Oops: 0000 [#1] SMP > | [ 30.806244] last sysfs file: /sys/devices/virtual/net/eth0.221/dev_id > | [ 30.806244] CPU 0 > | [ 30.806244] Modules linked in: 8021q garp stp uhci_hcd shpchp tpm_tis > tpm tpm_bios snd_pcsp psmouse snd_pcm snd_timer serio_raw snd soundcore > snd_page_alloc amd64_edac_mod edac_core edac_mce_amd k8temp evdev processor > i2c_piix4 i2c_core button pci_hotplug usbhid hid ext3 jbd mbcache sg sr_mod > cdrom sd_mod crc_t10dif pata_serverworks ehci_hcd ohci_hcd ata_generic > aacraid libata tg3 usbcore nls_base libphy scsi_mod thermal fan thermal_sys > [last unloaded: scsi_wait_scan] > | [ 30.806244] Pid: 0, comm: swapper Not tainted 2.6.32-bpo.5-amd64 #1 IBM > eServer 326m -[796966U]- > | [ 32.307829] tg3: eth0: Link is up at 1000 Mbps, full duplex. > | [ 32.307833] tg3: eth0: Flow control is on for TX and on for RX. > | [ 32.309540] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > | [ 30.806244] RIP: 0010:[<ffffffff812b7581>] [<ffffffff812b7581>] > ip6_output2+0x2c/0x28b Code: | 0xffffffff812b7555 <+0>: push %r13 | 0xffffffff812b7557 <+2>: push %r12 | 0xffffffff812b7559 <+4>: push %rbp | 0xffffffff812b755a <+5>: mov %rdi,%rbp | 0xffffffff812b755d <+8>: push %rbx | 0xffffffff812b755e <+9>: sub $0x8,%rsp | 0xffffffff812b7562 <+13>: mov 0x28(%rdi),%rax | 0xffffffff812b7566 <+17>: mov 0xc0(%rdi),%ecx | 0xffffffff812b756c <+23>: add 0xd0(%rdi),%rcx | 0xffffffff812b7573 <+30>: mov 0x18(%rax),%r13 | 0xffffffff812b7577 <+34>: movw $0xdd86,0x7e(%rdi) | 0xffffffff812b757d <+40>: mov %r13,0x20(%rdi) | 0xffffffff812b7581 <+44>: cmpb $0xff,0x18(%rcx) %rdi is the skb argument, %rcx seems to be not initialized (but as this function is static, the compiler can use that knowledge). > | [ 30.806244] RSP: 0018:ffff880005403bf0 EFLAGS: 00010202 > | [ 30.806244] RAX: ffff88011ef5c500 RBX: ffff88021e25e400 RCX: > 00000000815eab80 > | [ 30.806244] RDX: 0000000000000000 RSI: ffff880005403d18 RDI: > ffff88011e7c0900 > | [ 30.806244] RBP: ffff88011e7c0900 R08: 0000000000000000 R09: > ffffffff8144b200 > | [ 30.806244] R10: 000000009ad7942b R11: ffff88011ef5c500 R12: > ffff88011e7c0900 > | [ 30.806244] R13: ffff88021edec800 R14: ffffffff816763a0 R15: > ffff880005403d20 > | [ 30.806244] FS: 00007f3dc5f476e0(0000) GS:ffff880005400000(0000) > knlGS:0000000000000000 > | [ 30.806244] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > | [ 30.806244] CR2: 00000000815eab98 CR3: 0000000001001000 CR4: > 00000000000006f0 > | [ 30.806244] DR0: 0000000000000000 DR1: 0000000000000000 DR2: > 0000000000000000 > | [ 30.806244] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: > 0000000000000400 > | [ 30.806244] Process swapper (pid: 0, threadinfo ffffffff81422000, task > ffffffff814571f0) > | [ 30.806244] Stack: > | [ 30.806244] ffff88021fac2f40 ffff88021e25e400 ffff88011e7c0900 > ffff88011e7c0900 > | [ 30.806244] <0> 0000000000000000 ffffffff812b853c 0000000000000000 > ffff88021edec800 > | [ 30.806244] <0> ffff880005403e20 0000000000000010 ffffffff8149d894 > 0000001081254a36 > | [ 30.806244] Call Trace: > | [ 30.806244] <IRQ> > | [ 30.806244] [<ffffffff812b853c>] ? ip6_output+0xd5c/0xd74 > | [ 30.806244] [<ffffffff812c6c55>] ? ndisc_send_skb+0x196/0x2d1 > | [ 30.806244] [<ffffffff812c8333>] ? ndisc_send_ns+0x81/0xa3 > | [ 30.806244] [<ffffffff8105aa26>] ? __mod_timer+0x141/0x153 > | [ 30.806244] [<ffffffff812bbc6a>] ? addrconf_dad_timer+0x0/0x110 > | [ 30.806244] [<ffffffff812bbd54>] ? addrconf_dad_timer+0xea/0x110 > | [ 30.806244] [<ffffffff8105a257>] ? run_timer_softirq+0x1c9/0x268 > | [ 30.806244] [<ffffffff810539d1>] ? __do_softirq+0xdd/0x1a0 > | [ 30.806244] [<ffffffff81024d62>] ? lapic_next_event+0x18/0x1d > | [ 30.806244] [<ffffffff81011cac>] ? call_softirq+0x1c/0x30 > | [ 30.806244] [<ffffffff81013903>] ? do_softirq+0x3f/0x7c > | [ 30.806244] [<ffffffff81053840>] ? irq_exit+0x36/0x76 > | [ 30.806244] [<ffffffff81025827>] ? smp_apic_timer_interrupt+0x87/0x95 > | [ 30.806244] [<ffffffff81011673>] ? apic_timer_interrupt+0x13/0x20 > | [ 30.806244] <EOI> > | [ 30.806244] [<ffffffff8102c574>] ? native_safe_halt+0x2/0x3 > | [ 30.806244] [<ffffffff81017cc5>] ? default_idle+0x34/0x51 > | [ 30.806244] [<ffffffff8100feb1>] ? cpu_idle+0xa2/0xda > | [ 30.806244] [<ffffffff814e8140>] ? early_idt_handler+0x0/0x71 > | [ 30.806244] [<ffffffff814e8cd1>] ? start_kernel+0x3dc/0x3e8 > | [ 30.806244] [<ffffffff814e83b7>] ? x86_64_start_kernel+0xf9/0x106 > | [ 30.806244] Code: 55 41 54 55 48 89 fd 53 48 83 ec 08 48 8b 47 28 8b 8f > c0 00 00 00 48 03 8f d0 00 00 00 4c 8b 68 18 66 c7 47 7e 86 dd 4c 89 6f 20 > <80> 79 18 ff 0f 85 01 02 00 00 48 8b 47 10 31 d2 48 85 c0 74 07 > | [ 30.806244] RIP [<ffffffff812b7581>] ip6_output2+0x2c/0x28b > | [ 30.806244] RSP <ffff880005403bf0> > | [ 30.806244] CR2: 00000000815eab98 > | [ 37.912810] ---[ end trace 92c25082da12cbfb ]--- Bastian -- "Get back to your stations!" "We're beaming down to the planet, sir." -- Kirk and Mr. Leslie, "This Side of Paradise", stardate 3417.3 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org