Package: vlan
Version: 1.9-3
Severity: important
When I try to bring eth0 up followed by eth0.3 the machine hangs.
/etc/network/interfaces looks like:
auto lo
iface lo inet loopback
#auto eth0
iface eth0 inet loopback
#auto eth0.3
iface eth0.3 inet static
address 10.4.4.202
netmask 255.255.255.0
gateway 10.4.4.1
If I:
'ifup eth0'
wait a few seconds until 'link becomes ready'
'ifup eth0.3'
then everything is fine.
If I:
'ifup eth0;ifup eth0.3'
then I get a stack trace followed by the machine locking up (unless the
interfaces have been previously up. In that case doing 'rmmod tg3;modprobe
tg3;ifdown eth0;ifdown eth0.3' before ifup will cause it to panic).
The machine is a HS20 (Type 8832) blade in an IBM bladecenter and unfortunately
I've not had any success with Serial Over Lan so I can't currently get a
backtrace. I will try to see if I can adjust the resolution sufficiently to
take a screenshot of the whole backtrace though.
lspci:
00:00.0 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset) (rev 33)
00:00.1 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
00:00.2 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
00:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 Host bridge: Broadcom CSB6 South Bridge (rev b0)
00:0f.1 IDE interface: Broadcom CSB6 RAID/IDE Controller (rev b0)
00:0f.2 USB Controller: Broadcom CSB6 OHCI USB Controller (rev 05)
00:0f.3 ISA bridge: Broadcom GCLE-2 Host Bridge
00:10.0 Host bridge: Broadcom CIOB-E I/O Bridge with Gigabit Ethernet (rev 12)
00:10.2 Host bridge: Broadcom CIOB-E I/O Bridge with Gigabit Ethernet (rev 12)
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit
Ethernet (rev 02)
01:00.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit
Ethernet (rev 02)
Please ask for any extra information that would be useful.
Thanks,
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages vlan depends on:
ii iproute 20100519-2 networking and traffic control too
ii libc6 2.11.1-3 Embedded GNU C Library: Shared lib
vlan recommends no packages.
vlan suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
