Package: linux-2.6 Version: 2.6.32-20 Severity: normal
Samsung N150-11 netbook. Each lid close&open toggles the lid switch state so when the lid is open, half the time it reports closed: e...@esammy:~$ cat /proc/acpi/button/lid/LID0/state state: open # close & open lid e...@esammy:~$ cat /proc/acpi/button/lid/LID0/state state: closed So, the netbook only suspends every other time the lid is closed. This could be dangerous with the netbook stowed in running mode getting hot. -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-20) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:01:50 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=3cb206a7-b396-4c4f-b462-cd89b27eb3c4 ro quiet ** Not tainted ** Kernel log: [ 1050.208993] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1050.209058] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x204) [ 1050.209078] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x40514041) [ 1050.209089] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x40304020) [ 1050.209100] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) [ 1050.209117] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 1050.209129] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1050.209189] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x40303) [ 1050.209208] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x40714061) [ 1050.209220] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020) [ 1050.209231] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 1050.209247] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 1050.209260] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1050.209319] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40a) [ 1050.209339] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0x40b140a1) [ 1050.209350] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0x40904080) [ 1050.209361] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050) [ 1050.209377] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810008) [ 1050.209390] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 1050.209462] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1050.209506] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1050.209549] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1050.209591] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 1050.209643] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 1050.209686] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 1050.209697] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 1050.209783] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 1050.209815] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 1050.209924] ath9k 0000:05:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) [ 1050.209959] ath9k 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0100004) [ 1050.209971] ath9k 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 1050.209985] ath9k 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 1050.210270] sky2 0000:09:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103) [ 1050.210406] sky2 0000:09:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001) [ 1050.210459] sky2 0000:09:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0200004) [ 1050.210488] sky2 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) [ 1050.210541] sky2 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 1050.222997] i915 0000:00:02.0: setting latency timer to 64 [ 1050.223545] [drm] Big FIFO is enabled [ 1050.292089] [drm] Big FIFO is enabled [ 1050.292109] [drm] Big FIFO is enabled [ 1050.292280] [drm] Big FIFO is enabled [ 1050.316212] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1050.316222] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1050.414284] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1050.414295] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1050.414328] usb usb2: root hub lost power or was reset [ 1050.414360] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1050.414374] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1050.414409] usb usb3: root hub lost power or was reset [ 1050.414442] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1050.414457] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1050.414491] usb usb4: root hub lost power or was reset [ 1050.414524] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1050.414537] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1050.414564] usb usb5: root hub lost power or was reset [ 1050.414596] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1050.414608] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1050.414664] pci 0000:00:1e.0: setting latency timer to 64 [ 1050.414687] ahci 0000:00:1f.2: setting latency timer to 64 [ 1050.414913] ath9k 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1050.548069] sd 0:0:0:0: [sda] Starting disk [ 1050.732075] ata4: SATA link down (SStatus 0 SControl 300) [ 1050.732107] ata3: SATA link down (SStatus 0 SControl 300) [ 1050.732142] ata2: SATA link down (SStatus 0 SControl 300) [ 1052.188069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1052.207396] ata1.00: configured for UDMA/133 [ 1052.340057] usb 1-8: reset high speed USB device using ehci_hcd and address 2 [ 1052.486313] PM: Finishing wakeup. [ 1052.486318] Restarting tasks ... done. [ 1052.817687] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1052.826920] sky2 eth0: enabling interface [ 1052.827869] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1058.715555] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly. [ 1059.387947] CPU0 attaching NULL sched-domain. [ 1059.387964] CPU1 attaching NULL sched-domain. [ 1059.420205] CPU0 attaching sched-domain: [ 1059.420217] domain 0: span 0-1 level SIBLING [ 1059.420227] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 1059.420249] domain 1: span 0-1 level MC [ 1059.420257] groups: 0-1 (cpu_power = 1178) [ 1059.420277] CPU1 attaching sched-domain: [ 1059.420285] domain 0: span 0-1 level SIBLING [ 1059.420293] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 1059.420313] domain 1: span 0-1 level MC [ 1059.420321] groups: 0-1 (cpu_power = 1178) [ 1059.794280] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 1060.792406] wlan0: direct probe to AP 00:13:10:6a:0e:bb (try 1) [ 1060.795190] wlan0: direct probe responded [ 1060.795200] wlan0: authenticate with AP 00:13:10:6a:0e:bb (try 1) [ 1060.799217] wlan0: authenticated [ 1060.799276] wlan0: associate with AP 00:13:10:6a:0e:bb (try 1) [ 1060.801980] wlan0: RX AssocResp from 00:13:10:6a:0e:bb (capab=0x431 status=0 aid=5) [ 1060.801991] wlan0: associated [ 1060.802608] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1070.860039] wlan0: no IPv6 routers present [ 4301.869590] [drm] Big FIFO is enabled [ 4301.940079] [drm] Big FIFO is enabled [ 4301.940103] [drm] Big FIFO is enabled [ 4302.273843] [drm] Big FIFO is enabled ** Model information sys_vendor: SAMSUNG ELECTRONICS CO., LTD. product_name: N150P/N210P/N220P product_version: Not Applicable chassis_vendor: SAMSUNG ELECTRONICS CO., LTD. chassis_version: N/A bios_vendor: Phoenix Technologies Ltd. bios_version: 01KY.M008.20100430.RHU board_vendor: SAMSUNG ELECTRONICS CO., LTD. board_name: N150P/N210P/N220P board_version: Not Applicable ** Loaded modules: Module Size Used by easy_slow_down_manager 3953 0 sco 7209 2 bridge 39598 0 stp 1440 1 bridge bnep 9427 2 rfcomm 29581 0 l2cap 24736 6 bnep,rfcomm crc16 1319 1 l2cap bluetooth 41827 6 sco,bnep,rfcomm,l2cap acpi_cpufreq 5555 0 cpufreq_userspace 1992 0 cpufreq_stats 2659 0 cpufreq_powersave 902 0 cpufreq_conservative 5162 0 fuse 50190 1 loop 11783 0 snd_hda_codec_realtek 235522 1 snd_hda_intel 19987 3 snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5380 1 snd_hda_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 2 snd_pcm_oss arc4 1274 2 snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss ecb 1841 2 snd_seq_midi 4400 0 snd_rawmidi 15515 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi uvcvideo 51887 0 snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event videodev 29993 1 uvcvideo ath9k 249912 0 v4l1_compat 11442 2 uvcvideo,videodev snd_timer 15582 2 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 136956 1 ath9k v4l2_compat_ioctl32 8538 1 videodev snd 46446 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ath 8006 1 ath9k i915 254567 2 soundcore 4598 2 snd drm_kms_helper 20065 1 i915 snd_page_alloc 6249 2 snd_hda_intel,snd_pcm drm 142551 3 i915,drm_kms_helper cfg80211 101464 3 ath9k,mac80211,ath i2c_i801 7830 0 i2c_algo_bit 4225 1 i915 i2c_core 15712 6 videodev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit serio_raw 3752 0 video 17445 1 i915 rfkill 13044 3 bluetooth,cfg80211 samsung_backlight 2740 0 pcspkr 1699 0 evdev 7352 13 output 1692 1 video psmouse 49777 0 led_class 2433 1 ath9k button 4650 1 i915 battery 4998 0 ac 2192 0 processor 30247 3 acpi_cpufreq ext3 106518 1 jbd 37085 1 ext3 mbcache 5050 1 ext3 sd_mod 29777 3 crc_t10dif 1276 1 sd_mod ahci 32358 2 uhci_hcd 18521 0 libata 133584 1 ahci thermal 11674 0 sky2 39278 0 ehci_hcd 31135 0 scsi_mod 122117 2 sd_mod,libata usbcore 121943 4 uvcvideo,uhci_hcd,ehci_hcd thermal_sys 11942 3 video,processor,thermal nls_base 6361 1 usbcore ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:24:54:a1:66:b5 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 78:e4:00:50:26:9e brd ff:ff:ff:ff:ff:ff inet 192.168.0.108/24 brd 192.168.0.255 scope global wlan0 inet6 fe80::7ae4:ff:fe50:269e/64 scope link valid_lft forever preferred_lft forever 4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 9a:ec:24:ff:7c:a2 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 89392 1088 0 0 0 0 0 0 89392 1088 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 816593 2354 0 0 0 0 0 0 157688 987 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 3741 total packets received 4 with invalid addresses 0 forwarded 0 incoming packets discarded 2732 incoming packets delivered 1898 requests sent out 5 dropped because of missing route Icmp: 544 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 544 544 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 544 IcmpMsg: InType3: 544 OutType3: 544 Tcp: 17 active connections openings 0 passive connection openings 0 failed connection attempts 2 connection resets received 1 connections established 456 segments received 328 segments send out 12 segments retransmited 0 bad segments received. 10 resets sent Udp: 770 packets received 544 packets to unknown port received. 0 packet receive errors 1007 packets sent UdpLite: TcpExt: 1 TCP sockets finished time wait in fast timer 10 delayed acks sent Quick ack mode was activated 8 times 166 packet headers predicted 111 acknowledgments not containing data payload received 6 predicted acknowledgments 2 congestion windows recovered without slow start after partial ack 5 other TCP timeouts 8 DSACKs sent for old packets 2 connections reset due to early user close 1 connections aborted due to timeout 1 times unabled to send RST due to no memory IpExt: InMcastPkts: 56 OutMcastPkts: 48 InBcastPkts: 1095 OutBcastPkts: 386 InOctets: 927587 OutOctets: 198424 InMcastOctets: 12742 OutMcastOctets: 10654 InBcastOctets: 135942 OutBcastOctets: 51724 *** Device features: eth0: 0x10823 lo: 0x13865 pan0: 0xff3865 wlan0: 0x2000 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 30 Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 18d0 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0380000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0100000-f01fffff Prefetchable memory behind bridge: 0000000040000000-00000000401fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: 40200000-403fffff Prefetchable memory behind bridge: 0000000040400000-00000000405fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0200000-f02fffff Prefetchable memory behind bridge: 0000000040600000-00000000407fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: 40800000-409fffff Prefetchable memory behind bridge: 0000000040a00000-0000000040bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f0604000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=11, subordinate=11, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 29 Region 0: I/O ports at 18e8 [size=8] Region 1: I/O ports at 18dc [size=4] Region 2: I/O ports at 18e0 [size=8] Region 3: I/O ports at 18d8 [size=4] Region 4: I/O ports at 18c0 [size=16] Region 5: Memory at f0604400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 18a0 [size=32] Kernel driver in use: i801_smbus 05:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Foxconn International, Inc. Device [105b:e025] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] Subsystem: Samsung Electronics Co Ltd Device [144d:c072] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at 2000 [size=256] Capabilities: <access denied> Kernel driver in use: sky2 ** USB devices: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0ac8:c33f Z-Star Microelectronics Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy ii initramfs-tools [linux-initra 0.98 tools for generating an initramfs ii linux-base 2.6.32-20 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-20 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) ii firmware-ipw2x00 0.26 Binary firmware for Intel Pro Wire pn firmware-ivtv <none> (no description available) ii firmware-iwlwifi 0.26 Binary firmware for Intel Wireless ii firmware-linux 0.26 Binary firmware for various driver ii firmware-linux-nonfree 0.26 Binary firmware for various driver pn firmware-qlogic <none> (no description available) ii firmware-ralink 0.26 Binary firmware for Ralink wireles pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org