Package: linux-2.6 Version: 2.6.32-20 Severity: normal I'm trying to play a commercial DVD, using totem or vlc on a squeeze system.
with 2.6.32-19, i can play it successfully in both players. when i upgrade to 2.6.32-20, totem simply crashes, while vlc can play the audio, but no video is rendered. The Totem crash emits these errors to ~/.xsession-errors: The program 'totem' received an X Window System error. This probably reflects a bug in the program. The error was 'BadAlloc (insufficient resources for operation)'. (Details: serial 124 error_code 11 request_code 132 minor_code 19) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) maybe this has to do with the recent kernel fix mentioned in http://lwn.net/Articles/400746/ ? Thanks for keeping the linux kernel in good shape in debian! let me know if you need any additional information. --dkg -- Package-specific info: ** Version: Linux version 2.6.32-5-686 (Debian 2.6.32-20) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:38:27 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=b9ddc8b0-e070-43f2-83b9-b3209ae8e3c3 ro quiet ** Not tainted ** Kernel log: [ 2.084371] ata2.00: configured for UDMA/33 [ 2.084595] ata1.00: configured for UDMA/100 [ 2.084797] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1614N TM10 PQ: 0 ANSI: 5 [ 2.086333] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616E F501 PQ: 0 ANSI: 5 [ 2.246943] ata3: SATA link down (SStatus 0 SControl 310) [ 2.456018] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 2.574937] ata4: SATA link down (SStatus 0 SControl 310) [ 2.707385] usb 2-1: New USB device found, idVendor=1241, idProduct=1603 [ 2.707391] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.707395] usb 2-1: Product: USB Keyboard [ 2.707399] usb 2-1: Manufacturer: [ 2.707547] usb 2-1: configuration #1 chosen from 1 choice [ 2.796698] usbcore: registered new interface driver hiddev [ 2.800169] [drm] Initialized drm 1.1.0 20060810 [ 2.827632] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.827724] sd 0:0:0:0: [sda] Write Protect is off [ 2.827730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.827768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.828053] sda: sda1 sda2 < [ 2.843055] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2 [ 2.843249] generic-usb 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-1/input0 [ 2.861556] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.861568] i915 0000:00:02.0: setting latency timer to 64 [ 2.865482] sda5 [ 2.869231] [drm] set up 7M of stolen space [ 2.873665] sda6 sda7 [ 2.893714] [drm] initialized overlay support [ 2.915646] sda8 sda9 > [ 2.935511] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.941862] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3 [ 2.941973] generic-usb 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-1/input1 [ 2.942023] usbcore: registered new interface driver usbhid [ 2.942028] usbhid: v2.6:USB HID core driver [ 3.048057] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 3.055481] sr0: scsi3-mmc drive: 6x/48x cd/rw xa/form2 cdda tray [ 3.055488] Uniform CD-ROM driver Revision: 3.20 [ 3.056250] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.091806] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.092299] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.237563] Console: switching to colour frame buffer device 160x64 [ 3.237588] usb 4-2: New USB device found, idVendor=05fe, idProduct=0011 [ 3.237593] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.237597] usb 4-2: Product: PS2/USB Browser Combo Mouse [ 3.237601] usb 4-2: Manufacturer: Cypress Sem [ 3.237796] usb 4-2: configuration #1 chosen from 1 choice [ 3.247496] fb0: inteldrmfb frame buffer device [ 3.247499] registered panic notifier [ 3.247533] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.279294] input: Cypress Sem PS2/USB Browser Combo Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4 [ 3.279470] generic-usb 0003:05FE:0011.0003: input,hidraw2: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:1d.2-2/input0 [ 3.746330] PM: Starting manual resume from disk [ 3.746338] PM: Resume from partition 8:5 [ 3.746341] PM: Checking hibernation image. [ 3.746658] PM: Error -22 checking image file [ 3.746661] PM: Resume from disk failed. [ 3.792943] kjournald starting. Commit interval 5 seconds [ 3.792962] EXT3-fs: mounted filesystem with ordered data mode. [ 5.720111] udev: starting version 160 [ 6.309893] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 6.586598] processor LNXCPU:00: registered as cooling_device0 [ 6.710431] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 6.719818] parport_pc 00:07: reported by Plug and Play ACPI [ 6.719878] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 6.739546] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.787289] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.796126] intel_rng: FWH not detected [ 7.023460] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.481983] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.482063] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.852018] intel8x0_measure_ac97_clock: measured 54800 usecs (2640 samples) [ 8.852025] intel8x0: clocking to 48000 [ 9.587098] Adding 3405816k swap on /dev/sda5. Priority:-1 extents:1 across:3405816k [ 9.884387] EXT3 FS on sda1, internal journal [ 10.756637] kjournald starting. Commit interval 5 seconds [ 10.756810] EXT3 FS on sda6, internal journal [ 10.756819] EXT3-fs: mounted filesystem with ordered data mode. [ 12.109723] fuse init (API version 7.13) [ 16.257621] e100 0000:01:07.0: firmware: requesting e100/d101m_ucode.bin [ 16.424404] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.428291] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 16.428960] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.326171] Bluetooth: Core ver 2.15 [ 21.326289] NET: Registered protocol family 31 [ 21.326293] Bluetooth: HCI device and connection manager initialized [ 21.326300] Bluetooth: HCI socket layer initialized [ 21.408837] Bluetooth: L2CAP ver 2.14 [ 21.408843] Bluetooth: L2CAP socket layer initialized [ 21.552090] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.552097] Bluetooth: BNEP filters: protocol multicast [ 21.795528] Bridge firewalling registered [ 22.024789] Bluetooth: SCO (Voice Link) ver 0.6 [ 22.024796] Bluetooth: SCO socket layer initialized [ 22.604300] lp0: using parport0 (interrupt-driven). [ 22.632529] ppdev: user-space parallel port driver [ 23.930797] render error detected, EIR: 0x00000010 [ 23.930808] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking [ 23.930827] render error detected, EIR: 0x00000010 [ 26.768011] eth0: no IPv6 routers present [ 44.720781] UDF-fs: Partition marked readonly; forcing readonly mount [ 44.739248] UDF-fs INFO UDF: Mounting volume 'BATTLESTAR_GALACTICA_25', timestamp 2006/07/18 23:19 (1000) ** Model information not available ** Loaded modules: Module Size Used by isofs 24608 0 udf 62930 1 crc_itu_t 1035 1 udf speedstep_lib 2468 0 cpufreq_conservative 4018 0 cpufreq_userspace 1480 0 cpufreq_stats 1940 0 cpufreq_powersave 602 0 ppdev 4058 0 lp 5570 0 sco 5857 2 bridge 32987 0 stp 996 1 bridge bnep 7444 2 l2cap 21705 3 bnep crc16 1027 1 l2cap bluetooth 36327 5 sco,bnep,l2cap rfkill 10264 3 bluetooth binfmt_misc 4907 1 fuse 43758 1 snd_intel8x0 19523 1 snd_ac97_codec 79148 1 snd_intel8x0 ac97_bus 710 1 snd_ac97_codec snd_pcm_oss 28671 0 snd_mixer_oss 10461 1 snd_pcm_oss snd_pcm 47214 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_midi 3576 0 snd_rawmidi 12505 1 snd_seq_midi snd_seq_midi_event 3684 1 snd_seq_midi snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event snd_timer 12258 2 snd_pcm,snd_seq snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq snd 34363 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 3450 1 snd i2c_i801 6462 0 snd_page_alloc 5045 2 snd_intel8x0,snd_pcm shpchp 21220 0 rng_core 2178 0 pci_hotplug 18065 1 shpchp parport_pc 15799 1 dcdbas 3892 0 psmouse 44657 0 parport 22554 3 ppdev,lp,parport_pc processor 26615 0 evdev 5609 13 pcspkr 1207 0 serio_raw 2916 0 ext3 94204 2 jbd 32169 1 ext3 mbcache 3762 1 ext3 sg 15968 0 sr_mod 10770 1 i915 221415 2 cdrom 26487 1 sr_mod sd_mod 25869 4 crc_t10dif 1012 1 sd_mod drm_kms_helper 18305 1 i915 drm 112020 3 i915,drm_kms_helper usbhid 27980 0 i2c_algo_bit 3497 1 i915 ata_generic 2019 0 hid 50645 1 usbhid uhci_hcd 16057 0 i2c_core 12696 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit sata_via 5537 0 thermal 9206 0 e100 22317 0 video 14605 1 i915 ata_piix 17640 4 ehci_hcd 27851 0 libata 115721 3 ata_generic,sata_via,ata_piix button 3598 1 i915 thermal_sys 9378 3 processor,thermal,video mii 2714 1 e100 output 1204 1 video usbcore 98386 4 usbhid,uhci_hcd,ehci_hcd scsi_mod 101401 4 sg,sr_mod,sd_mod,libata nls_base 4541 3 isofs,udf,usbcore ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:d0:b7:b1:b6:b6 brd ff:ff:ff:ff:ff:ff inet 192.168.13.36/24 brd 192.168.13.255 scope global eth0 inet6 fe80::2d0:b7ff:feb1:b6b6/64 scope link valid_lft forever preferred_lft forever 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 2a:dd:61:05:43:b0 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 560 8 0 0 0 0 0 0 560 8 0 0 0 0 0 0 eth0: 129557 149 0 0 0 0 0 0 15017 144 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 163 total packets received 2 with invalid addresses 0 forwarded 0 incoming packets discarded 161 incoming packets delivered 126 requests sent out Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 5 active connections openings 0 passive connection openings 0 failed connection attempts 0 connection resets received 0 connections established 104 segments received 88 segments send out 0 segments retransmited 0 bad segments received. 3 resets sent Udp: 35 packets received 0 packets to unknown port received. 0 packet receive errors 36 packets sent UdpLite: TcpExt: 4 delayed acks sent 78 packet headers predicted 9 acknowledgments not containing data payload received 2 predicted acknowledgments IpExt: InMcastPkts: 12 OutMcastPkts: 14 InBcastPkts: 21 InOctets: 130258 OutOctets: 9904 InMcastOctets: 2503 OutMcastOctets: 2583 InBcastOctets: 3528 *** Device features: eth0: 0x0 lo: 0x13865 pan0: 0xff3865 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 01) Subsystem: Dell Device [1028:0127] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device [8086:2562] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0127] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ffa00000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0127] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0127] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at ff60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0127] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ff40 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0127] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: ff700000-ff9fffff Prefetchable memory behind bridge: 48000000-481fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device [1028:0127] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Region 5: Memory at 48200000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01) Subsystem: Dell Device [1028:0127] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at dc80 [size=32] Kernel driver in use: i801_smbus 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01) Subsystem: Dell Device [1028:0127] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at d800 [size=256] Region 1: I/O ports at dc40 [size=64] Region 2: Memory at ffa80400 (32-bit, non-prefetchable) [size=512] Region 3: Memory at ffa80000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH 01:07.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 08) Subsystem: Intel Corporation EtherExpress PRO/100+ Management Adapter with Alert On LAN* [8086:000e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ecc0 [size=64] Region 2: Memory at ff700000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at 48000000 [disabled] [size=1M] Capabilities: <access denied> Kernel driver in use: e100 01:08.0 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] (rev 50) Subsystem: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at ecb0 [size=16] Region 1: I/O ports at ec90 [size=16] Region 2: I/O ports at ec70 [size=16] Region 3: I/O ports at ec50 [size=16] Region 4: I/O ports at ec20 [size=32] Region 5: I/O ports at e800 [size=256] Expansion ROM at 48100000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: sata_via ** USB devices: Bus 004 Device 002: ID 05fe:0011 Chic Technology Corp. Browser Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 1241:1603 Belkin Keyboard Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on: ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy ii initramfs-tools [linux-initra 0.98 tools for generating an initramfs ii linux-base 2.6.32-20 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686 recommends: pn firmware-linux-free <none> (no description available) ii libc6-i686 2.11.2-2 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-5-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.26 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
