Package: fglrx-source
Version: 1:10-9-2
Severity: normal
Hi,
Thanks for the fix to #597478. However the module fails to build using a
locally built kernel because there is no file
/usr/src/linux-headers-$(KERNELRELEASE)/Module.symvers
but /usr/src/linux-source-$(KERNELRELEASE)/Module.symvers instead.
Thanks
-- Package-specific info:
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850]
DRM and fglrx Informations from dmesg:
[ 0.000000] No AGP bridge found
[ 0.297552] Linux agpgart interface v0.103
[ 5.139983] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 5.192980] [fglrx] Maximum main memory to use for locked dma buffers: 3798
MBytes.
[ 5.193141] [fglrx] vendor: 1002 device: 9442 count: 1
[ 5.193453] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 5.203521] [fglrx] Kernel PAT support is enabled
[ 5.203534] [fglrx] module loaded - fglrx 8.76.7 [Aug 3 2010] with 1 minors
[ 20.436225] fglrx_pci 0000:01:00.0: irq 30 for MSI/MSI-X
[ 20.436779] [fglrx] Firegl kernel thread PID: 2243
[ 20.436933] [fglrx] IRQ 30 Enabled
[ 22.334279] [fglrx] Gart USWC size:1240 M.
[ 22.334282] [fglrx] Gart cacheable size:491 M.
[ 22.334286] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 22.334288] [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[ 22.334290] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1590 Aug 25 16:58 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Lailloute"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 20715 Sep 22 21:16 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux odysseus 2.6.32 #1 SMP Mon Aug 30 11:06:18 CEST
2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32
root=UUID=a0057b2b-89ef-4be8-8651-c4379fe26202 ro vga=8 quiet
Build Date: 24 August 2010 02:20:59PM
xorg-server 2:1.7.7-4 (Julien Cristau <jcris...@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 22 21:16:02 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Lailloute"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]-0"
(**) | |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(II) Loader magic: 0x7c5f40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:9442:1043:025e ATI Technologies Inc RV770 [Radeon HD
4850] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @
0x0000b000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.76.7
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.76.7
(II) ATI Proprietary Linux Driver Version Identifier:8.76.7
(II) ATI Proprietary Linux Driver Release Identifier: 8.762
(II) ATI Proprietary Linux Driver Build Date: Aug 3 2010 21:16:31
(II) Primary Device is: PCI 0...@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x9442) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0...@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for
this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x19a7720
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 249
ukiDynamicMajor: found major device number 249
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(==) fglrx(0): NoAccel = NO
(**) fglrx(0): ATI 2D Acceleration Architecture disabled, using XAA
(--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series " (Chipset = 0x9442)
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x025e)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original
ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfe8e0000
(--) fglrx(0): I/O port at 0x0000b000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.3
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV770
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 30.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: DFP on secondary TMDS [tmds2i]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: 194 Serial#: 1112092985
(II) fglrx(0): Year: 2005 Week: 37
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x...@70hz
(II) fglrx(0): 640x...@60hz
(II) fglrx(0): 640x...@67hz
(II) fglrx(0): 640x...@72hz
(II) fglrx(0): 640x...@75hz
(II) fglrx(0): 800x...@56hz
(II) fglrx(0): 800x...@60hz
(II) fglrx(0): 800x...@72hz
(II) fglrx(0): 800x...@75hz
(II) fglrx(0): 832x...@75hz
(II) fglrx(0): 1024x...@60hz
(II) fglrx(0): 1024x...@70hz
(II) fglrx(0): 1024x...@75hz
(II) fglrx(0): 1280x1...@75hz
(II) fglrx(0): 1152x...@75hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz,
PixClock max 145 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HMDY906310
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2d940139314942
(II) fglrx(0): 250f010380261e782ade95a3544c9926
(II) fglrx(0): 0f5054bfef8081808140714f01010101
(II) fglrx(0): 010101010101302a009851002a403070
(II) fglrx(0): 1300782d1100001e000000fd00384b1e
(II) fglrx(0): 510e000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 00484d44593930363331300a2020008b
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output TV has no monitor section
(II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output DFP2 connected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Output TV disconnected
(II) fglrx(0): Output COMPONENT_VIDEO disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output DFP2 using initial mode 1280x1024
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable
heads and 1 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 249
ukiDynamicMajor: found major device number 249
ukiDynamicMajor: found major device number 249
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 16, (OK)
ukiOpenByBusid: ukiOpenMinor returns 16
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fe122492000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.76.7
(II) fglrx(0): Date: Aug 3 2010
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000
(II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer -
assumption)
(II) fglrx(0): Largest offscreen area available: 1664 x 960
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
(II) fglrx(0): Cannot set TV horizontal size.
(II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position
after horizontal size changed.
(II) fglrx(0): Cannot set TV horizontal position.
(II) fglrx(0): Cannot set TV vertical position.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
ukiDynamicMajor: found major device number 249
ukiDynamicMajor: found major device number 249
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 338 x 270
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse
(/dev/input/event1)
(**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer
catchall"
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse"
(type: MOUSE)
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse
(/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch,compose:rwin"
(II) config/udev: Adding input device PC Speaker (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2
capable environments
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (100, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages fglrx-source depends on:
ii bzip2 1.0.5-4 high-quality block-sorting file co
ii debhelper 8.0.0 helper programs for debian/rules
ii make 3.81-8 An utility for Directing compilati
Versions of packages fglrx-source recommends:
ii kernel-package 12.036 A utility for building Linux kerne
ii module-assistant 0.11.3 tool to make module package creati
Versions of packages fglrx-source suggests:
ii fglrx-driver 1:10-8-1 non-free AMD/ATI r6xx - r7xx displ
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
