Package: xserver-xorg-video-nouveau Severity: normal attached is the dmesg output from this machine. It was booted with the forced-fbdev xorg.conf initially, and nouveau.ko was actually *not* loaded in that case.
about 460 seconds after boot, i removed the xorg.conf, and did: /etc/init.d/gdm3 stop /etc/init.d/gdm3 start This caused the following modules to be loaded (they weren't before): nouveau 465420 0 ttm 46748 1 nouveau drm_kms_helper 24325 1 nouveau drm 142475 3 nouveau,ttm,drm_kms_helper not much else shows in dmesg, though. let me know if you want other info. Regards, --dkg -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 Dec 22 21:42 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1945212 Dec 2 02:02 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 0000:00:10.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: lrwxrwxrwx 1 root root 24 Jan 3 23:39 /etc/X11/xorg.conf -> /etc/X11/xorg.conf.fbdev Contents of /etc/X11/xorg.conf: Section "Device" Identifier "Build-In" Driver "fbdev" EndSection Section "Screen" Identifier "s" Device "Build-In" DefaultDepth 24 EndSection Kernel version (/proc/version): Linux version 2.6.32-5-powerpc (Debian 2.6.32-29) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Fri Dec 10 16:30:49 UTC 2010 Xorg X server log files on system: -rw-r--r-- 1 root root 8634 Jan 7 23:05 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.26-2-powerpc64 ppc Debian Current Operating System: Linux bagheera 2.6.32-5-powerpc #1 Fri Dec 10 16:30:49 UTC 2010 ppc Kernel command line: root=/dev/hda3 ro Build Date: 02 December 2010 01:48:29AM xorg-server 2:1.7.7-10 (Julien Cristau <jcris...@debian.org>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 7 23:05:21 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (**) |-->Screen "s" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Build-In" (==) No monitor specified for screen "s". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x101e8180 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:0:16:0) 10de:0110:0000:0000 nVidia Corporation NV11 [GeForce2 MX/MX 400] rev 178, Mem @ 0x91000000/16777216, 0x98000000/134217728, BIOS @ 0x????????/65536 (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 0.4.2 ABI class: X.Org Video Driver, version 6.0 (II) FBDEV: driver for framebuffer: fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.7, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 (**) FBDEV(0): claimed PCI slot 0...@0:16:0 (II) FBDEV(0): using default device (II) FBDEV(0): Creating default Display subsection in Screen section "s" for depth/fbbpp 24/32 (**) FBDEV(0): Depth 24, (--) framebuffer bpp 32 (==) FBDEV(0): RGB weight 888 (==) FBDEV(0): Default visual is TrueColor (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) (II) FBDEV(0): hardware: NV11 (video memory: 32768kB) (II) FBDEV(0): checking modes against framebuffer device... (II) FBDEV(0): checking modes against monitor... (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024) (**) FBDEV(0): Built-in mode "current": 99.2 MHz, 72.1 kHz, 89.0 Hz (II) FBDEV(0): Modeline "current"x0.0 99.20 1024 1072 1168 1376 768 769 772 810 +hsync +vsync -csync (72.1 kHz) (==) FBDEV(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (**) FBDEV(0): using shadow framebuffer (II) Loading sub module "shadow" (II) LoadModule: "shadow" (II) Loading /usr/lib/xorg/modules/libshadow.so (II) Module shadow: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org ANSI C Emulation, version 0.4 (==) Depth 24 pixmap format is 32 bpp (==) FBDEV(0): Backing store disabled (==) FBDEV(0): DPMS enabled (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0) (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device PMU (/dev/input/event1) (**) PMU: Applying InputClass "evdev keyboard catchall" (**) PMU: always reports core events (**) PMU: Device: "/dev/input/event1" (II) PMU: Found keys (II) PMU: Configuring as keyboard (II) XINPUT: Adding extended input device "PMU" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" udev information: P: /devices/virtual/input/input0/event0 N: input/event0 S: char/13:64 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input0/event0 E: MAJOR=13 E: MINOR=64 E: DEVNAME=/dev/input/event0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: DEVLINKS=/dev/char/13:64 P: /devices/virtual/input/input0/mouse0 N: input/mouse0 S: char/13:32 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input0/mouse0 E: MAJOR=13 E: MINOR=32 E: DEVNAME=/dev/input/mouse0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: DEVLINKS=/dev/char/13:32 P: /devices/virtual/input/input1/event1 N: input/event1 S: char/13:65 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input1/event1 E: MAJOR=13 E: MINOR=65 E: DEVNAME=/dev/input/event1 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:65 DRM Information from dmesg: [ 2.361254] Linux agpgart interface v0.103 [ 2.361345] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 1.5 chipset [ 2.363088] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 2.363252] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: powerpc (ppc) Kernel: Linux 2.6.32-5-powerpc Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-video-nouveau depends on: ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib ii libdrm-nouveau1 2.4.21-1~squeeze3 Userspace interface to nouveau-spe ii xserver-xorg-core [xor 2:1.7.7-10 Xorg X server - core server xserver-xorg-video-nouveau recommends no packages. xserver-xorg-video-nouveau suggests no packages. -- no debconf information
[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 256MB; using 512kB for hash table (at cff80000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-powerpc (Debian 2.6.32-29) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Fri Dec 10 16:30:49 UTC 2010 [ 0.000000] Found initrd at 0xc1b00000:0xc256b000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x11 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: eMac [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /p...@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /p...@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /p...@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=502, gen1=503 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x10000000, Total RAM: 0x10000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00010000 [ 0.000000] Normal 0x00010000 -> 0x00010000 [ 0.000000] HighMem 0x00010000 -> 0x00010000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00010000 [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c0505310, node_mem_map c059b000 [ 0.000000] DMA zone: 512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65024 pages, LIFO batch:15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: root=/dev/hda3 ro [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] High memory: 0k [ 0.000000] Memory: 242560k/262144k available (4928k kernel code, 19240k reserved, 280k data, 478k bss, 232k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffef000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfde72000..0xff800000 : early ioremap [ 0.000000] * 0xd1000000..0xfde72000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] irq: irq 55 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 55 [ 0.000000] GMT Delta read from XPRAM: -240 minutes, DST: on [ 0.000000] time_init: decrementer frequency = 24.913197 MHz [ 0.000000] time_init: processor frequency = 700.000000 MHz [ 0.000000] clocksource: timebase mult[a08eb6b] shift[22] registered [ 0.000000] clockevent: decrementer mult[660b616] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] irq: irq 22 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 22 [ 0.000000] irq: irq 23 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 23 [ 0.001144] Security Framework initialized [ 0.001174] SELinux: Disabled at boot. [ 0.001196] Mount-cache hash table entries: 512 [ 0.001647] device-tree: Duplicate name in /cpus/PowerPC,g...@0, renamed to "l2-cache#1" [ 0.004096] Initializing cgroup subsys ns [ 0.004114] Initializing cgroup subsys cpuacct [ 0.004129] Initializing cgroup subsys devices [ 0.004142] Initializing cgroup subsys freezer [ 0.004155] Initializing cgroup subsys net_cls [ 0.005393] devtmpfs: initialized [ 0.006405] regulator: core version 0.5 [ 0.006613] NET: Registered protocol family 16 [ 0.007267] MPC7450 family performance monitor hardware support registered [ 0.007344] irq: irq 42 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 42 [ 0.007397] KeyWest i2c @0xf8001003 irq 42 /un...@f8000000/i...@f8001000 [ 0.007416] channel 0 bus <multibus> [ 0.007427] channel 1 bus <multibus> [ 0.007472] irq: irq 26 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 26 [ 0.007498] KeyWest i2c @0x80018000 irq 26 /p...@f2000000/mac...@17/i...@18000 [ 0.007515] channel 0 bus <multibus> [ 0.007539] PMU i2c /p...@f2000000/mac...@17/via-...@16000/pmu-i2c [ 0.007553] channel 1 bus <multibus> [ 0.007564] channel 2 bus <multibus> [ 0.007644] irq: irq 25 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 25 [ 0.007679] irq: irq 47 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 47 [ 0.007859] PCI: Probing PCI hardware [ 0.008092] pci 0000:00:10.0: reg 10 32bit mmio: [0x91000000-0x91ffffff] [ 0.008107] pci 0000:00:10.0: reg 14 32bit mmio pref: [0x98000000-0x9fffffff] [ 0.008133] pci 0000:00:10.0: reg 30 32bit mmio pref: [0x90000000-0x9000ffff] [ 0.008228] irq: irq 48 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 48 [ 0.008610] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff] [ 0.008678] pci 0001:10:18.0: reg 10 32bit mmio: [0x80081000-0x80081fff] [ 0.008745] pci 0001:10:19.0: reg 10 32bit mmio: [0x80080000-0x80080fff] [ 0.008838] irq: irq 27 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 27 [ 0.008872] irq: irq 28 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 28 [ 0.009290] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff] [ 0.009331] pci 0002:20:0e.0: supports D1 D2 [ 0.009340] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.009372] pci 0002:20:0e.0: PME# disabled [ 0.009418] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff] [ 0.009446] pci 0002:20:0f.0: reg 30 32bit mmio pref: [0xf5100000-0xf51fffff] [ 0.009514] irq: irq 40 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 40 [ 0.009545] irq: irq 41 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 41 [ 0.009843] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff] [ 0.009853] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff] [ 0.009863] pci_bus 0000:00: resource 2 mem: [0x90000000-0xafffffff] [ 0.009873] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff] [ 0.009882] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff] [ 0.009891] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff] [ 0.009901] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff] [ 0.009911] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff] [ 0.012310] bio: create slab <bio-0> at 0 [ 0.012709] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.012754] vgaarb: loaded [ 0.013133] Switching to clocksource timebase [ 0.017486] NET: Registered protocol family 2 [ 0.017765] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.018531] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.018812] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.018964] TCP: Hash tables configured (established 8192 bind 8192) [ 0.018986] TCP reno registered [ 0.019216] NET: Registered protocol family 1 [ 0.019481] Unpacking initramfs... [ 0.860814] Freeing initrd memory: 10668k freed [ 0.862619] Thermal assist unit not available [ 0.863363] audit: initializing netlink socket (disabled) [ 0.863436] type=2000 audit(1294455889.860:1): initialized [ 0.876191] VFS: Disk quotas dquot_6.5.2 [ 0.876446] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.876570] msgmni has been set to 495 [ 0.877298] alg: No test for stdrng (krng) [ 0.877447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.877479] io scheduler noop registered [ 0.877494] io scheduler anticipatory registered [ 0.877511] io scheduler deadline registered [ 0.877659] io scheduler cfq registered (default) [ 0.878467] nvidiafb: Device ID: 10de0110 [ 1.037209] i2c i2c-0: unable to read EDID block. [ 1.397206] i2c i2c-0: unable to read EDID block. [ 1.757206] i2c i2c-0: unable to read EDID block. [ 1.893191] nvidiafb: Found OF EDID for head 1 [ 1.893202] nvidiafb: EDID found from BUS1 [ 1.992866] i2c i2c-1: unable to read EDID block. [ 2.144865] i2c i2c-1: unable to read EDID block. [ 2.296865] i2c i2c-1: unable to read EDID block. [ 2.349183] nvidiafb: Unable to detect which CRTCNumber... [ 2.349201] ...Defaulting to CRTCNumber 0 [ 2.349218] nvidiafb: Using CRT on CRTC 0 [ 2.353601] Console: switching to colour frame buffer device 128x48 [ 2.356221] nvidiafb: PCI nVidia NV11 framebuffer (32MB @ 0x98000000) [ 2.361054] Generic non-volatile memory driver v1.1 [ 2.361254] Linux agpgart interface v0.103 [ 2.361345] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 1.5 chipset [ 2.363088] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 2.363252] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 2.363422] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.363970] pmac_zilog: 0.6 (Benjamin Herrenschmidt <b...@kernel.crashing.org>) [ 2.364058] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 2.364219] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 2.364377] Serial: MPC52xx PSC UART driver [ 2.364574] MacIO PCI driver attached to Keylargo chipset [ 2.365096] irq: irq 32 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 32 [ 2.365439] irq: irq 19 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 19 [ 2.365464] irq: irq 11 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 16 [ 2.365569] irq: irq 20 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 20 [ 2.365591] irq: irq 12 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 17 [ 2.365693] irq: irq 21 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 21 [ 2.365715] irq: irq 13 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 18 [ 2.365820] irq: irq 5 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 24 [ 2.365843] irq: irq 6 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 29 [ 2.365994] irq: irq 7 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 30 [ 2.366016] irq: irq 8 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 31 [ 2.366444] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 2.366992] Uniform Multi-Platform E-IDE driver [ 2.367418] adb: starting probe task... [ 2.367480] adb: finished probe task... [ 3.385178] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19 [ 3.385282] Probing IDE interface ide0... [ 3.701490] hda: Maxtor 4D040H2, ATA DISK drive [ 4.373293] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.373401] hda: UDMA/66 mode selected [ 4.375021] ide0 at 0xd1076000-0xd1076070,0xd1076160 on irq 19 [ 5.393177] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20 [ 5.394717] Probing IDE interface ide1... [ 5.793363] hdc: LG CD-ROM CRD-8484B, ATAPI CD/DVD-ROM drive [ 6.465265] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 6.465431] hdc: MWDMA2 mode selected [ 6.467138] ide1 at 0xd107a000-0xd107a070,0xd107a160 on irq 20 [ 7.485177] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 1, irq 21 [ 7.486739] Probing IDE interface ide2... [ 8.053294] ide2 at 0xd2082000-0xd2082070,0xd2082160 on irq 21 [ 8.054866] ide-gd driver 1.18 [ 8.056408] hda: max request size: 128KiB [ 8.073307] hda: 80022600 sectors (40971 MB) w/2048KiB Cache, CHS=65535/16/63 [ 8.074881] hda: cache flushes not supported [ 8.076573] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 [ 8.089327] mice: PS/2 mouse device common for all mice [ 8.091079] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 8.093787] TCP cubic registered [ 8.095926] NET: Registered protocol family 10 [ 8.098859] lo: Disabled Privacy Extensions [ 8.101407] Mobile IPv6 [ 8.103031] NET: Registered protocol family 17 [ 8.105002] PM: Resume from disk failed. [ 8.105060] registered taskstats version 1 [ 8.107213] input: PMU as /devices/virtual/input/input1 [ 8.109207] rtc-generic rtc-generic: setting system clock to 2011-01-07 23:04:57 UTC (1294441497) [ 8.110910] Initalizing network drop monitor service [ 8.112667] Freeing unused kernel memory: 232k init [ 8.199943] udev[40]: starting version 164 [ 8.550911] sungem.c:v0.98 8/24/03 David S. Miller (da...@redhat.com) [ 8.646845] PHY ID: 4061e4, addr: 0 [ 8.649425] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:ab:69:a8 [ 8.651210] eth0: Found BCM5221 PHY [ 8.710765] usbcore: registered new interface driver usbfs [ 8.713460] usbcore: registered new interface driver hub [ 8.716005] usbcore: registered new device driver usb [ 8.773720] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.823188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.826666] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002) [ 8.828458] ohci_hcd 0001:10:18.0: OHCI Host Controller [ 8.830255] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1 [ 8.831996] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000 [ 8.835320] ide-cd driver 5.00 [ 8.838434] ide-cd: hdc: ATAPI 52X CD-ROM drive, 128kB Cache [ 8.840222] Uniform CD-ROM driver Revision: 3.20 [ 8.873277] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.0 [ 8.909851] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.911627] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.913308] usb usb1: Product: OHCI Host Controller [ 8.914922] usb usb1: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd [ 8.916537] usb usb1: SerialNumber: 0001:10:18.0 [ 8.923128] usb usb1: configuration #1 chosen from 1 choice [ 8.928476] hub 1-0:1.0: USB hub found [ 8.933379] hub 1-0:1.0: 2 ports detected [ 8.935239] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002) [ 8.940589] ohci_hcd 0001:10:19.0: OHCI Host Controller [ 8.942624] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2 [ 8.944285] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000 [ 9.021657] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.023345] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.024898] usb usb2: Product: OHCI Host Controller [ 9.026453] usb usb2: Manufacturer: Linux 2.6.32-5-powerpc ohci_hcd [ 9.027985] usb usb2: SerialNumber: 0001:10:19.0 [ 9.030726] usb usb2: configuration #1 chosen from 1 choice [ 9.032656] hub 2-0:1.0: USB hub found [ 9.034382] hub 2-0:1.0: 2 ports detected [ 9.187866] device-mapper: uevent: version 1.0.3 [ 9.191976] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 9.352117] kjournald starting. Commit interval 5 seconds [ 9.353829] EXT3-fs: mounted filesystem with ordered data mode. [ 9.373603] firewire_core: created device fw0: GUID 000393fffeab69a8, S400 [ 11.045396] eth0: Link is up at 100 Mbps, full-duplex. [ 11.049031] udev[173]: starting version 164 [ 11.822641] PowerMac i2c bus pmu 2 registered [ 11.826940] PowerMac i2c bus pmu 1 registered [ 11.833376] PowerMac i2c bus mac-io 0 registered [ 11.836506] PowerMac i2c bus uni-n 1 registered [ 11.840987] PowerMac i2c bus uni-n 0 registered [ 15.733323] EXT3 FS on hda3, internal journal [ 19.142432] kjournald starting. Commit interval 5 seconds [ 19.144545] EXT3 FS on dm-2, internal journal [ 19.146314] EXT3-fs: mounted filesystem with ordered data mode. [ 19.245555] kjournald starting. Commit interval 5 seconds [ 19.250697] EXT3 FS on dm-1, internal journal [ 19.252450] EXT3-fs: mounted filesystem with ordered data mode. [ 19.301222] kjournald starting. Commit interval 5 seconds [ 19.303177] EXT3 FS on dm-0, internal journal [ 19.304844] EXT3-fs: mounted filesystem with ordered data mode. [ 20.966519] eth0: Link is up at 100 Mbps, full-duplex. [ 20.968165] eth0: Pause is disabled [ 25.452630] fuse init (API version 7.13) [ 30.977186] eth0: no IPv6 routers present [ 31.304056] lp: driver loaded but no devices found [ 468.447347] [drm] Initialized drm 1.1.0 20060810