Package: linux-2.6 Version: 2.6.32-30 Severity: important The package "linux-image-2.6.32-5-openvz-amd64" is shipped with a deprecated version of the CIFS module ("cifs.ko"). So, userspace utilities such as "mount.cifs" become incompatible with old version of cifs.ko and refuse to work.
For example, one can mount nothing via CIFS. Rolling back the packages "cifs-utils", "samba-common", "smbfs', etc down to Lenny or Lenny-backports bundles resolves the issue as a temporary workaround. -- Package-specific info: ** Version: Linux version 2.6.32-5-openvz-amd64 (Debian 2.6.32-30) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:22:50 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-openvz-amd64 root=/dev/mapper/pve-root ro elevator=noop elevator=noop ** Not tainted ** Kernel log: [ 0.731462] NET: Registered protocol family 10 [ 0.733485] Mobile IPv6 [ 0.734773] NET: Registered protocol family 17 [ 0.736174] PM: Resume from disk failed. [ 0.736183] registered taskstats version 1 [ 0.737687] rtc_cmos rtc_cmos: setting system clock to 2011-02-11 12:45:25 UTC (1297428325) [ 0.739748] Initalizing network drop monitor service [ 0.740962] Freeing unused kernel memory: 592k freed [ 0.743100] Write protecting the kernel read-only data: 4144k [ 1.321118] usbcore: registered new interface driver usbfs [ 1.323699] usbcore: registered new interface driver hub [ 1.331019] alloc irq_desc for 19 on node -1 [ 1.331048] alloc kstat_irqs on node -1 [ 1.331116] virtio-pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.335636] usbcore: registered new device driver usb [ 1.362972] SCSI subsystem initialized [ 1.369334] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.396113] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.397485] alloc irq_desc for 22 on node -1 [ 1.397485] alloc kstat_irqs on node -1 [ 1.397485] ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.398628] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 1.400015] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1 [ 1.404766] libata version 3.00 loaded. [ 1.409576] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0404000 [ 1.431952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.432033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.434672] usb usb1: Product: OHCI Host Controller [ 1.435951] usb usb1: Manufacturer: Linux 2.6.32-5-openvz-amd64 ohci_hcd [ 1.437321] usb usb1: SerialNumber: 0000:00:06.0 [ 1.439427] usb usb1: configuration #1 chosen from 1 choice [ 1.440853] hub 1-0:1.0: USB hub found [ 1.442013] hub 1-0:1.0: 8 ports detected [ 1.443442] ahci 0000:00:0d.0: version 3.0 [ 1.443529] alloc irq_desc for 21 on node -1 [ 1.443532] alloc kstat_irqs on node -1 [ 1.443570] ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.445364] ahci: SSS flag set, parallel bus scan disabled [ 1.448318] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 1.450361] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc [ 1.469660] scsi0 : ahci [ 1.471251] ata1: SATA max UDMA/133 abar m8192@0xf0406000 port 0xf0406100 irq 21 [ 1.792845] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.794291] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133 [ 1.795521] ata1.00: 20971520 sectors, multi 128: LBA48 NCQ (depth 31/32) [ 1.797646] ata1.00: configured for UDMA/133 [ 1.799123] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5 [ 1.815209] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB) [ 1.818080] sd 0:0:0:0: [sda] Write Protect is off [ 1.819340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.819362] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.821937] sda: sda1 sda2 [ 1.824076] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.848631] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 2.006911] device-mapper: uevent: version 1.0.3 [ 2.009189] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 2.124311] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021 [ 2.125707] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.127150] usb 1-1: Product: USB Tablet [ 2.128157] usb 1-1: Manufacturer: VirtualBox [ 2.140214] usb 1-1: configuration #1 chosen from 1 choice [ 2.204639] usbcore: registered new interface driver hiddev [ 2.222702] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input2 [ 2.224822] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0 [ 2.227787] usbcore: registered new interface driver usbhid [ 2.229763] usbhid: v2.6:USB HID core driver [ 2.337002] kjournald starting. Commit interval 5 seconds [ 2.338350] EXT3-fs: mounted filesystem with ordered data mode. [ 2.881904] udev[210]: starting version 164 [ 3.363784] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 3.449661] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 3.451867] ACPI: Power Button [PWRF] [ 3.482383] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr [ 3.572389] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5 [ 3.574497] ACPI: Sleep Button [SLPF] [ 3.575894] processor LNXCPU:00: registered as cooling_device0 [ 3.598862] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 3.675877] ACPI: AC Adapter [AC] (on-line) [ 3.908720] parport_pc 00:04: reported by Plug and Play ACPI [ 4.663318] EXT3 FS on dm-0, internal journal [ 5.113253] RPC: Registered udp transport module. [ 5.114743] RPC: Registered tcp transport module. [ 5.115928] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.227364] Slow work thread pool: Starting up [ 5.241082] Slow work thread pool: Ready [ 5.243341] FS-Cache: Loaded [ 5.361733] FS-Cache: Netfs 'nfs' registered for caching [ 6.372846] Adding 1310712k swap on /dev/mapper/pve-swap. Priority:-1 extents:1 across:1310712k [ 6.562513] kjournald starting. Commit interval 5 seconds [ 6.564919] EXT3 FS on dm-2, internal journal [ 6.566314] EXT3-fs: mounted filesystem with ordered data mode. [ 6.568832] kjournald starting. Commit interval 5 seconds [ 6.570162] EXT3 FS on sda1, internal journal [ 6.571550] EXT3-fs: mounted filesystem with ordered data mode. [ 7.627126] Bridge firewalling registered [ 7.739697] device eth0 entered promiscuous mode [ 7.781377] vmbr0: port 1(eth0) entering forwarding state [ 17.824333] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.016469] vmbr0: no IPv6 routers present [ 18.516033] eth0: no IPv6 routers present ** Model information sys_vendor: innotek GmbH product_name: VirtualBox product_version: 1.2 bios_vendor: innotek GmbH bios_version: VirtualBox ** Loaded modules: Module Size Used by vzethdev 7301 0 vznetdev 17967 0 simfs 3087 0 vzrst 110318 0 vzcpt 97042 0 vzdquota 35158 0 [permanent] vzmon 16317 4 vzethdev,vznetdev,vzrst,vzcpt vzdev 1824 4 vzethdev,vznetdev,vzdquota,vzmon xt_tcpudp 2319 0 xt_length 1164 0 xt_hl 1313 0 xt_tcpmss 1401 0 xt_TCPMSS 2935 0 iptable_mangle 2881 0 iptable_filter 2322 0 xt_multiport 2267 0 xt_limit 1782 0 xt_dscp 1805 0 ipt_REJECT 1953 0 ip_tables 14107 2 iptable_mangle,iptable_filter x_tables 13213 10 xt_tcpudp,xt_length,xt_hl,xt_tcpmss,xt_TCPMSS,xt_multiport,xt_limit,xt_dscp,ipt_REJECT,ip_tables bridge 40774 0 stp 1440 1 bridge nfs 244058 0 lockd 58772 1 nfs fscache 29850 1 nfs nfs_acl 2031 1 nfs auth_rpcgss 33476 1 nfs sunrpc 164669 5 nfs,lockd,nfs_acl,auth_rpcgss parport_pc 18855 0 parport 27954 1 parport_pc ac 2192 0 joydev 8475 0 i2c_piix4 8328 0 psmouse 49777 0 button 4682 0 evdev 7368 0 processor 29999 0 pcspkr 1699 0 serio_raw 3768 0 i2c_core 15712 1 i2c_piix4 ext3 106470 3 jbd 37053 1 ext3 mbcache 5050 1 ext3 usbhid 33308 0 hid 63273 1 usbhid dm_mod 53786 9 sd_mod 29857 3 crc_t10dif 1276 1 sd_mod ahci 32374 2 ohci_hcd 19228 0 libata 133568 1 ahci thermal 11754 0 virtio_net 10513 0 ehci_hcd 31167 0 thermal_sys 11942 2 processor,thermal scsi_mod 122181 2 sd_mod,libata virtio_pci 5535 0 virtio_ring 3210 1 virtio_pci virtio 3309 2 virtio_net,virtio_pci usbcore 122194 4 usbhid,ohci_hcd,ehci_hcd nls_base 6377 1 usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef] (prog-if 00 [VGA controller]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M] Expansion ROM at <unassigned> [disabled] 00:03.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000] Subsystem: Red Hat, Inc Device [1af4:0001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at d000 [size=32] Capabilities: [80] #00 [0000] Kernel driver in use: virtio-pci 00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at d020 [size=32] Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=4M] Region 2: Memory at f0400000 (32-bit, prefetchable) [size=16K] 00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 22 Region 0: Memory at f0404000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 00:0d.0 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at d040 [size=8] Region 1: I/O ports at <ignored> Region 2: I/O ports at d050 [size=8] Region 3: I/O ports at <ignored> Region 4: I/O ports at d060 [size=16] Region 5: Memory at f0406000 (32-bit, non-prefetchable) [size=8K] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ahci ** Sound cards: -- System Information: Debian Release: 6.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-openvz-amd64 (SMP w/1 CPU core) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-5-openvz-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-init 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-31 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo hi vzctl 3.0.24-1pve4 OpenVZ - server virtualization sol Versions of packages linux-image-2.6.32-5-openvz-amd64 recommends: pn firmware-linux-free <none> (no description available) Versions of packages linux-image-2.6.32-5-openvz-amd64 suggests: ii grub 0.97-64 GRand Unified Bootloader (dummy pa pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-openvz-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org