Package: openoffice.org-impress
Version: 1:3.2.1-11+squeeze2
Severity: important
*** Please type your report below this line ***
When starting a presentation created by the impress package of
openoffice, the normal
editing window remains visible, and the presentation never shows up.
However, openoffice
acts *as if* there would be presentation showing, including advancing to
the next
slide with "space". It no longer reacts on the mouse, but returns to
normal mode if
the space bar has been pressed often enough. Apparently, the program
assumes to show
the presentation, though it never gets visible.
Probably the problem is related to the graphics setup of the machine; it
uses the "intel"
graphics driver which supports multiview, though is not configured to do
so. Impress does
not show a secondary monitor to present the notes on - the presentation
customizer remains
blank at the location where multiple screens would be supported.
For completeness, here is the output of xrandr -q --verbose:
Screen 0: minimum 320 x 200, current 2048 x 1536, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x41
Timestamp: 83569
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
LVDS1 connected 2048x1536+0+0 (0x45) normal (normal left inverted right
x axis y axis) 0mm x 0mm panning 2048x1536+0+0
Identifier: 0x42
Timestamp: 83569
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 1
Panning: 2048x1536+0+0
Tracking: 0x0+0+0
Border: 0/0/0/0
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
BACKLIGHT: 7 (0x00000007) range: (0,7)
Backlight: 7 (0x00000007) range: (0,7)
scaling mode: Full
supported: None Full Center Full
aspect
1024x768 (0x45) 65.0MHz *current +preferred
h: width 1024 start 1048 end 1184 total 1248 skew 0 clock
52.1KHz
v: height 768 start 771 end 777 total 868 clock
60.0Hz
1024x768 (0x46) 94.5MHz +HSync +VSync
h: width 1024 start 1072 end 1168 total 1376 skew 0 clock
68.7KHz
v: height 768 start 769 end 772 total 808 clock
85.0Hz
1024x768 (0x47) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock
60.0KHz
v: height 768 start 769 end 772 total 800 clock
75.0Hz
1024x768 (0x48) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock
56.5KHz
v: height 768 start 771 end 777 total 806 clock
70.1Hz
1024x768 (0x49) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock
48.4KHz
v: height 768 start 771 end 777 total 806 clock
60.0Hz
1024x768 (0x4a) 44.9MHz +HSync +VSync Interlace
h: width 1024 start 1032 end 1208 total 1264 skew 0 clock
35.5KHz
v: height 768 start 768 end 776 total 817 clock
43.5Hz
832x624 (0x4b) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock
49.7KHz
v: height 624 start 625 end 628 total 667 clock
74.6Hz
800x600 (0x4c) 56.3MHz +HSync +VSync
h: width 800 start 832 end 896 total 1048 skew 0 clock
53.7KHz
v: height 600 start 601 end 604 total 631 clock
85.1Hz
800x600 (0x4d) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock
48.1KHz
v: height 600 start 637 end 643 total 666 clock
72.2Hz
800x600 (0x4e) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock
46.9KHz
v: height 600 start 601 end 604 total 625 clock
75.0Hz
800x600 (0x4f) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock
37.9KHz
v: height 600 start 601 end 605 total 628 clock
60.3Hz
800x600 (0x50) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock
35.2KHz
v: height 600 start 601 end 603 total 625 clock
56.2Hz
640x480 (0x51) 36.0MHz -HSync -VSync
h: width 640 start 696 end 752 total 832 skew 0 clock
43.3KHz
v: height 480 start 481 end 484 total 509 clock
85.0Hz
640x480 (0x52) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock
37.9KHz
v: height 480 start 489 end 492 total 520 clock
72.8Hz
640x480 (0x53) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock
37.5KHz
v: height 480 start 481 end 484 total 500 clock
75.0Hz
640x480 (0x54) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock
31.5KHz
v: height 480 start 490 end 492 total 525 clock
59.9Hz
720x400 (0x55) 35.5MHz -HSync +VSync
h: width 720 start 756 end 828 total 936 skew 0 clock
37.9KHz
v: height 400 start 401 end 404 total 446 clock
85.0Hz
640x400 (0x56) 31.5MHz -HSync +VSync
h: width 640 start 672 end 736 total 832 skew 0 clock
37.9KHz
v: height 400 start 401 end 404 total 445 clock
85.1Hz
640x350 (0x57) 31.5MHz +HSync -VSync
h: width 640 start 672 end 736 total 832 skew 0 clock
37.9KHz
v: height 350 start 382 end 385 total 445 clock
85.1Hz
DVI1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x43
Timestamp: 83569
Subpixel: horizontal rgb
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
TV1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x44
Timestamp: 83569
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
bottom margin: 37 (0x00000025) range: (0,100)
right margin: 46 (0x0000002e) range: (0,100)
top margin: 36 (0x00000024) range: (0,100)
left margin: 54 (0x00000036) range: (0,100)
mode: NTSC-M
supported: NTSC-M NTSC-443 NTSC-J PAL-M
PAL-N PAL 480p@59.94Hz 480p@60Hz
576p 720p@60Hz 720p@59.94Hz 720p@50Hz
1080i@50Hz 1080i@60Hz 1080i@59.94H
And here is the xorg.conf:
Section "Files"
FontPath "unix/:7100"
FontPath "unix/:7101"
FontPath "/usr/share/fonts/X11/misc"
#FontPath "/usr/X11R6/lib/X11/fonts/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
#FontPath "/var/lib/defoma/gs.d/dirs/fonts"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "SendCoreEvents" "on"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "thor"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "SendCoreEvents" "on"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device"
"/dev/input/by-path/platform-i8042/serio-4-event-mouse"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "SHMConfig" "on"
Option "UpDownScrolling" "off"
Option "MaxTapTime" "200"
Option "MaxDoubleTapTime" "400"
Option "FastTaps" "on"
Option "FingerHigh" "60"
Option "PalmDetect" "on"
Option "PalmMinWidth" "6"
Option "LockedDrags" "off"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "InputFashion" "Pen"
Option "Name" "c100"
Option "ForceDevice" "ISDV4"
Option "SendCoreEvents" "true"
Option "Type" "stylus"
Option "Mode" "absolute"
Option "Vendor" "Wacom"
Option "TopX" "0"
Option "TopY" "0"
Option "BottomX" "49152"
Option "BottomY" "36864"
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "InputFashion" "Tablet"
Option "Name" "c100"
Option "ForceDevice" "ISDV4"
Option "SendCoreEvents" "true"
Option "Type" "cursor"
Option "Mode" "absolute"
Option "Vendor" "Wacom"
Option "TopX" "0"
Option "TopY" "0"
Option "BottomX" "49152"
Option "BottomY" "36864"
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/ttyS0"
Option "InputFashion" "Eraser"
Option "Name" "c100"
Option "ForceDevice" "ISDV4"
Option "SendCoreEvents" "true"
Option "Type" "eraser"
Option "Mode" "absolute"
Option "Vendor" "Wacom"
Option "TopX" "0"
Option "TopY" "0"
Option "BottomX" "49152"
Option "BottomY" "36864"
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller"
Driver "intel"
Option "Tiling" "true"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "1280x1024" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
InputDevice "cursor"
InputDevice "stylus"
InputDevice "eraser"
EndSection
Section "ServerFlags"
Option "DontZap" "off"
Option "DontVTSwitch" "off"
Option "DontZoom" "off"
Option "DisableVidModeExtension" "off"
Option "VTSysReq" "on"
Option "PC98" "off"
Option "AutoAddDevices" "off"
Option "AutoEnableDevices" "off"
Option "DefaultServerLayout" "Default Layout"
EndSection
Section "DRI"
Mode 0666
EndSection
The bug seems to be related to the 3.2.1 version only. The 3.3.0 version
of LibreOffice
works correctly on the identical setup.
-- System Information:
Debian Release: 6.0
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32.28 (SMP w/2 CPU cores)
Locale: LANG=de_DE.iso-8859-1, LC_CTYPE=de_DE (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages openoffice.org-impress depends on:
ii libc6 2.11.2-10 Embedded GNU C Library:
Shared lib
ii libgcc1 1:4.4.5-8 GCC support library
ii libstdc++6 4.4.5-8 The GNU Standard C++ Library v3
pn openoffice.org-core <none> (no description available)
pn openoffice.org-draw <none> (no description available)
openoffice.org-impress recommends no packages.
openoffice.org-impress suggests no packages.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
