On Thu, Feb 10, 2011 at 10:49:39AM +0000, Richard Mortimer wrote: > [Cc'd to 611...@bugs.debian.org] > > On 10/02/2011 08:36, Jurij Smakov wrote: > >On Wed, Feb 09, 2011 at 11:07:49PM +0000, Richard Mortimer wrote: > >>On 09/02/2011 21:43, Jurij Smakov wrote: > ... snip ... > >>> > >>>http://www.wooyd.org/debian/squeeze/ > >>> > ... > > > >Sure, I have just uploaded a netboot image to the same location. > > > >>>If you have encountered problems during Squeeze installation, please > >>>test this image and report the results, as a positive confirmation of > >>>fixes on a variety of different systems is essential for getting all > >>>these fixes into the first Squeeze point release. > >>> > >>I did spot a couple of issues with the installer when I gave squeeze > >>a try a couple of weeks back. I only got chance to file an > >>installation report about one of them > >>http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=611314 > >>Its not a massive show stopper and has an easy workaround but if > >>that can be fixed then it will make others lives easier. > > > >Yeah, this bug was pointed out to me just yesterday. I don't know > >what's going on there yet, it appears that the PCI IDs of your > >card match the ones which are supported by the driver, so if module is > >not loaded at all there is probably something wrong with udev. At a > >point where it says it cannot detect the disks, can you drop back to > >shell and see whether the driver actually isn't loaded (as opposed to > >being loaded but failing to find the disks anyway)? Maybe there is > >something relevant showing up in dmesg or /var/log/messages? > > > >If not, I'll try to come up with some udev debugging commands to try > >and understand why this detection is failing. > > I tested with your netboot image and it exhibits the same behaviour > as the official installer. The sym53c8xx driver does get loaded > automatically. I'm pretty sure that this is a timing issue. I > confirmed that all of the /dev/sd* files were present along with > /dev/disk/* entries.
Ok, I think the magic happens in the disk_found() function in disk-detect.sh [0]. It looks like it will retry up to 3 times to see whether devices have showed up (with list-devices disk), sleeping 2 seconds between attempts... If it takes up to 7 seconds for driver to initialize itself, we might be cutting it just a bit too short. Unfortunately, I don't see how we can test it easily, as neither netboot image nor miniiso contain the udebs, they are downloaded off the network. [0] http://git.debian.org/?p=d-i/hw-detect.git;a=blob_plain;f=disk-detect.sh;hb=HEAD > Looking at the dmesg output I can see a 7 second delay whilst the > driver/scsi subsystem settles itself down. (I also see a similar > issue when I boot after install with raid/lvm setup - but both > rootdelay & the scsi probe sync option fixes that). After dropping > to the installer shell I can re-enter the "Detect disks" screen and > it find them without problem. > > Regards > > Richard > > > Full console output below just in case it is useful. > > > > BusyBox v1.17.1 (Debian 1:1.17.1-8) built-in shell (ash) > Enter 'help' for a list of built-in commands. > > ~ # > ~ # lsmod > Module Size Used by > sd_mod 31548 0 > crc_t10dif 1292 1 sd_mod > ata_generic 3199 0 > libata 147511 1 ata_generic > sym53c8xx 71569 0 > scsi_transport_spi 20705 1 sym53c8xx > alim15x3 4002 0 > usb_storage 41983 0 > scsi_mod 132037 5 > sd_mod,libata,sym53c8xx,scsi_transport_spi,usb_storage > ohci_hcd 18603 0 > uhci_hcd 20343 0 > ehci_hcd 33777 0 > sungem 25663 0 > usbcore 117062 5 usb_storage,ohci_hcd,uhci_hcd,ehci_hcd > nls_base 6649 1 usbcore > sungem_phy 9430 1 sungem > ~ # > ~ # ls /dev > block shm tty42 > bsg stderr tty43 > bus stdin tty44 > char stdout tty45 > console tty tty46 > core tty0 tty47 > cpu_dma_latency tty1 tty48 > disk tty10 tty49 > fd tty11 tty5 > full tty12 tty50 > input tty13 tty51 > kmsg tty14 tty52 > log tty15 tty53 > loop0 tty16 tty54 > mdesc tty17 tty55 > mem tty18 tty56 > net tty19 tty57 > network_latency tty2 tty58 > network_throughput tty20 tty59 > null tty21 tty6 > openprom tty22 tty60 > port tty23 tty61 > ppp tty24 tty62 > psaux tty25 tty63 > ptmx tty26 tty7 > pts tty27 tty8 > random tty28 tty9 > rtc0 tty29 ttyS0 > sda tty3 ttyS1 > sda1 tty30 urandom > sda2 tty31 vcs > sda3 tty32 vcs1 > sda7 tty33 vcs2 > sdb tty34 vcs3 > sdb1 tty35 vcs4 > sdb2 tty36 vcsa > sdb3 tty37 vcsa1 > sdb4 tty38 vcsa2 > sdb5 tty39 vcsa3 > sdb6 tty4 vcsa4 > sdb7 tty40 vga_arbiter > sdb8 tty41 zero > ~ # ls -l /dev/sd* > brw-rw-rw- 1 root root 8, 0 Feb 10 10:20 /dev/sda > brw-rw-rw- 1 root root 8, 1 Feb 10 10:20 /dev/sda1 > brw-rw-rw- 1 root root 8, 2 Feb 10 10:20 /dev/sda2 > brw-rw-rw- 1 root root 8, 3 Feb 10 10:20 /dev/sda3 > brw-rw-rw- 1 root root 8, 7 Feb 10 10:20 /dev/sda7 > brw-rw-rw- 1 root root 8, 16 Feb 10 10:20 /dev/sdb > brw-rw-rw- 1 root root 8, 17 Feb 10 10:20 /dev/sdb1 > brw-rw-rw- 1 root root 8, 18 Feb 10 10:20 /dev/sdb2 > brw-rw-rw- 1 root root 8, 19 Feb 10 10:20 /dev/sdb3 > brw-rw-rw- 1 root root 8, 20 Feb 10 10:20 /dev/sdb4 > brw-rw-rw- 1 root root 8, 21 Feb 10 10:20 /dev/sdb5 > brw-rw-rw- 1 root root 8, 22 Feb 10 10:20 /dev/sdb6 > brw-rw-rw- 1 root root 8, 23 Feb 10 10:20 /dev/sdb7 > brw-rw-rw- 1 root root 8, 24 Feb 10 10:20 /dev/sdb8 > ~ # ls -l /dev/disk/ > drwxr-xr-x 2 root root 280 Feb 10 10:20 by-id > drwxr-xr-x 2 root root 280 Feb 10 10:20 by-path > drwxr-xr-x 2 root root 60 Feb 10 10:20 by-uuid > ~ # ls -l /dev/disk/* > /dev/disk/by-id: > lrwxrwxrwx 1 root root 9 Feb 10 10:20 > scsi-1HITACHI_DK32EJ-14NC_404W3436 -> ../../sdb > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > scsi-1HITACHI_DK32EJ-14NC_404W3436-part1 -> ../../sdb1 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > scsi-1HITACHI_DK32EJ-14NC_404W3436-part2 -> ../../sdb2 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > scsi-1HITACHI_DK32EJ-14NC_404W3436-part4 -> ../../sdb4 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > scsi-1HITACHI_DK32EJ-14NC_404W3436-part5 -> ../../sdb5 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > scsi-1HITACHI_DK32EJ-14NC_404W3436-part6 -> ../../sdb6 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > scsi-1HITACHI_DK32EJ-14NC_404W3436-part7 -> ../../sdb7 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > scsi-1HITACHI_DK32EJ-14NC_404W3436-part8 -> ../../sdb8 > lrwxrwxrwx 1 root root 9 Feb 10 10:20 > scsi-SSEAGATE_ST318404LSUN18G3BT064HY000010431618 -> ../../sda > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > scsi-SSEAGATE_ST318404LSUN18G3BT064HY000010431618-part1 -> > ../../sda1 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > scsi-SSEAGATE_ST318404LSUN18G3BT064HY000010431618-part2 -> > ../../sda2 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > scsi-SSEAGATE_ST318404LSUN18G3BT064HY000010431618-part7 -> > ../../sda7 > > /dev/disk/by-path: > lrwxrwxrwx 1 root root 9 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:0:0 -> ../../sda > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:0:0-part1 -> ../../sda1 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:0:0-part2 -> ../../sda2 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:0:0-part7 -> ../../sda7 > lrwxrwxrwx 1 root root 9 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:1:0 -> ../../sdb > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:1:0-part1 -> ../../sdb1 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:1:0-part2 -> ../../sdb2 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:1:0-part4 -> ../../sdb4 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:1:0-part5 -> ../../sdb5 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:1:0-part6 -> ../../sdb6 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:1:0-part7 -> ../../sdb7 > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > pci-0000:02:08.0-scsi-0:0:1:0-part8 -> ../../sdb8 > > /dev/disk/by-uuid: > lrwxrwxrwx 1 root root 10 Feb 10 10:20 > b58ad5ab-b4e8-40a5-9d5b-b2cabb7eb8b1 -> ../../sdb4 > ~ # > ~ # lspci > 00:01.0 PCI bridge: Oracle Corporation Simba Advanced PCI Bridge (rev 13) > 00:01.1 PCI bridge: Oracle Corporation Simba Advanced PCI Bridge (rev 13) > 01:03.0 Non-VGA unclassified device: ALi Corporation M7101 Power > Management Controller [PMU] > 01:05.1 Ethernet controller: Oracle Corporation RIO 10/100 Ethernet > [eri] (rev 01) > 01:05.3 USB Controller: Oracle Corporation RIO USB (rev 01) > 01:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA > Bridge [Aladdin IV/V/V+] > 01:0c.0 Bridge: Oracle Corporation RIO EBUS (rev 01) > 01:0c.1 Ethernet controller: Oracle Corporation RIO 10/100 Ethernet > [eri] (rev 01) > 01:0c.3 USB Controller: Oracle Corporation RIO USB (rev 01) > 01:0d.0 IDE interface: ALi Corporation M5229 IDE (rev c3) > 02:05.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB > 1.1 Controller (rev 61) > 02:05.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB > 1.1 Controller (rev 61) > 02:05.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63) > 02:05.3 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 > [Fire II(M)] IEEE 1394 OHCI Controller (rev 46) > 02:08.0 SCSI storage controller: LSI Logic / Symbios Logic > 53C896/897 (rev 07) > 02:08.1 SCSI storage controller: LSI Logic / Symbios Logic > 53C896/897 (rev 07) > ~ # > > > > [ 200.468985] mice: PS/2 mouse device common for all mice > [ 200.538418] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0 > [ 200.628329] TCP cubic registered > [ 200.671447] NET: Registered protocol family 10 > [ 200.732131] lo: Disabled Privacy Extensions > [ 200.788794] Mobile IPv6 > [ 200.820869] NET: Registered protocol family 17 > [ 200.879755] registered taskstats version 1 > [ 200.934254] rtc-m48t59 rtc-m48t59.0: setting system clock to > 2011-02-10 10:16:44 UTC (1297333004) > [ 201.051070] Initalizing network drop monitor service > [ 201.711894] usbcore: registered new interface driver usbfs > [ 201.791254] sungem.c:v0.98 8/24/03 David S. Miller (da...@redhat.com) > [ 201.876037] PCI: Enabling device: (0000:01:0c.1), cmd 146 > [ 201.877133] usbcore: registered new interface driver hub > [ 201.949086] PHY ID: 437421, addr: 1 > [ 201.952526] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet > 00:03:ba:2d:9e:0c > [ 202.044179] eth0: Found Generic MII PHY > [ 202.096002] usbcore: registered new device driver usb > [ 202.177753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 202.267647] PHY ID: 437421, addr: 1 > [ 202.271488] eth1: Sun GEM (PCI) 10/100/1000BaseT Ethernet > 00:03:ba:2d:9e:0d > [ 202.363094] eth1: Found Generic MII PHY > [ 202.414713] PCI: Enabling device: (0000:02:05.2), cmd 2 > [ 202.414741] ehci_hcd 0000:02:05.2: EHCI Host Controller > [ 202.484009] ehci_hcd 0000:02:05.2: new USB bus registered, > assigned bus number 1 > [ 202.633387] ehci_hcd 0000:02:05.2: Enabling legacy PCI PM > [ 202.707958] ehci_hcd 0000:02:05.2: irq 14, io mem 0x1ff0000a000 > [ 202.839880] ehci_hcd 0000:02:05.2: USB 2.0 started, EHCI 1.00 > [ 202.916606] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 203.005972] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 203.101045] usb usb1: Product: EHCI Host Controller > [ 203.165333] usb usb1: Manufacturer: Linux 2.6.32-5-sparc64 ehci_hcd > [ 203.247778] usb usb1: SerialNumber: 0000:02:05.2 > [ 203.310069] usb usb1: configuration #1 chosen from 1 choice > [ 203.384212] hub 1-0:1.0: USB hub found > [ 203.434393] hub 1-0:1.0: 4 ports detected > [ 203.501542] uhci_hcd: USB Universal Host Controller Interface driver > [ 203.602188] PCI: Enabling device: (0000:02:05.0), cmd 1 > [ 203.602227] uhci_hcd 0000:02:05.0: UHCI Host Controller > [ 203.681193] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 203.766667] uhci_hcd 0000:02:05.0: new USB bus registered, > assigned bus number 2 > [ 203.864910] PCI: Enabling device: (0000:01:0c.3), cmd 2 > [ 203.864948] ohci_hcd 0000:01:0c.3: OHCI Host Controller > [ 203.934099] ohci_hcd 0000:01:0c.3: new USB bus registered, > assigned bus number 3 > [ 204.032201] uhci_hcd 0000:02:05.0: irq 12, io base 0x1fe02c00200 > [ 204.111891] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > [ 204.201175] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 204.296244] usb usb2: Product: UHCI Host Controller > [ 204.360398] usb usb2: Manufacturer: Linux 2.6.32-5-sparc64 uhci_hcd > [ 204.443112] eth0: Link is up at 100 Mbps, full-duplex. > [ 204.510707] usb usb2: SerialNumber: 0000:02:05.0 > [ 204.572320] ohci_hcd 0000:01:0c.3: irq 7, io mem 0x1ffe2000000 > [ 204.650168] usb usb2: configuration #1 chosen from 1 choice > [ 204.723753] eth1: Link is up at 100 Mbps, full-duplex. > [ 204.796468] hub 2-0:1.0: USB hub found > [ 204.845805] hub 2-0:1.0: 2 ports detected > [ 204.899404] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > [ 204.988762] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 205.083852] usb usb3: Product: OHCI Host Controller > [ 205.147981] usb usb3: Manufacturer: Linux 2.6.32-5-sparc64 ohci_hcd > [ 205.230464] usb usb3: SerialNumber: 0000:01:0c.3 > [ 205.292050] PCI: Enabling device: (0000:02:05.1), cmd 1 > [ 205.292079] uhci_hcd 0000:02:05.1: UHCI Host Controller > [ 205.361767] usb usb3: configuration #1 chosen from 1 choice > [ 205.436254] hub 3-0:1.0: USB hub found > [ 205.485581] hub 3-0:1.0: 4 ports detected > [ 205.539131] uhci_hcd 0000:02:05.1: new USB bus registered, > assigned bus number 4 > [ 205.636981] PCI: Enabling device: (0000:01:05.3), cmd 2 > [ 205.637014] ohci_hcd 0000:01:05.3: OHCI Host Controller > [ 205.706604] ohci_hcd 0000:01:05.3: new USB bus registered, > assigned bus number 5 > [ 205.804356] uhci_hcd 0000:02:05.1: irq 13, io base 0x1fe02c00220 > [ 205.884207] ohci_hcd 0000:01:05.3: irq 10, io mem 0x1ffe5000000 > [ 205.962888] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 206.052196] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 206.147258] usb usb4: Product: UHCI Host Controller > [ 206.211407] usb usb4: Manufacturer: Linux 2.6.32-5-sparc64 uhci_hcd > [ 206.293889] usb usb4: SerialNumber: 0000:02:05.1 > [ 206.360014] usb usb4: configuration #1 chosen from 1 choice > [ 206.434027] hub 4-0:1.0: USB hub found > [ 206.483726] hub 4-0:1.0: 2 ports detected > [ 206.537071] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 206.626452] usb usb5: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 206.721511] usb usb5: Product: OHCI Host Controller > [ 206.785661] usb usb5: Manufacturer: Linux 2.6.32-5-sparc64 ohci_hcd > [ 206.868146] usb usb5: SerialNumber: 0000:01:05.3 > [ 206.945846] usb usb5: configuration #1 chosen from 1 choice > [ 207.020142] hub 5-0:1.0: USB hub found > [ 207.074466] hub 5-0:1.0: 4 ports detected > [ 255.161214] SCSI subsystem initialized > [ 255.191455] Initializing USB Mass Storage driver... > [ 255.191654] usbcore: registered new interface driver usb-storage > [ 255.192726] USB Mass Storage support registered. > [ 258.088311] eth0: Link is up at 100 Mbps, full-duplex. > [ 258.088328] eth0: Pause is disabled > [ 258.133052] eth1: Link is up at 100 Mbps, full-duplex. > [ 258.133071] eth1: Pause is disabled > [ 259.266698] eth0: Link is up at 100 Mbps, full-duplex. > [ 259.266717] eth0: Pause is disabled > [ 270.246218] eth0: Link is up at 100 Mbps, full-duplex. > [ 270.246237] eth0: Pause is disabled > [ 293.593968] lo: Disabled Privacy Extensions > [ 293.629428] eth0: Link is up at 100 Mbps, full-duplex. > [ 293.629445] eth0: Pause is disabled > [ 311.225451] lo: Disabled Privacy Extensions > [ 311.260996] eth0: Link is up at 100 Mbps, full-duplex. > [ 311.261015] eth0: Pause is disabled > [ 435.628895] alim15x3 0000:01:0d.0: IDE controller (0x10b9:0x5229 > rev 0xc3) > [ 435.628935] PCI: Enabling device: (0000:01:0d.0), cmd 5 > [ 435.629060] alim15x3 0000:01:0d.0: 100% native mode on irq 8 > [ 435.629083] ide0: BM-DMA at 0x1fe02000420-0x1fe02000427 > [ 435.629152] ide1: BM-DMA at 0x1fe02000428-0x1fe0200042f > [ 435.629206] Probing IDE interface ide0... > [ 435.632190] ide0: no devices on the port > [ 435.633249] Probing IDE interface ide1... > [ 435.663719] PCI: Enabling device: (0000:02:08.0), cmd 147 > [ 435.880411] sym0: <896> rev 0x7 at pci 0000:02:08.0 irq 11 > [ 435.883300] sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking > [ 435.890503] sym0: SCSI BUS has been reset. > [ 435.890564] scsi0 : sym-2.2.3 > [ 435.892106] PCI: Enabling device: (0000:02:08.1), cmd 147 > [ 436.108204] sym1: <896> rev 0x7 at pci 0000:02:08.1 irq 11 > [ 436.111533] sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking > [ 436.118701] sym1: SCSI BUS has been reset. > [ 436.118775] scsi1 : sym-2.2.3 > [ 436.556103] ide0 at 0x1fe02000400-0x1fe02000407,0x1fe0200041a on irq 8 > [ 436.556158] ide1 at 0x1fe02000410-0x1fe02000417,0x1fe0200040a on irq 8 > [ 436.665718] libata version 3.00 loaded. > [ 438.901946] scsi 0:0:0:0: Direct-Access SEAGATE > ST318404LSUN18G 5221 PQ: 0 ANSI: 3 > [ 438.901985] scsi target0:0:0: tagged command queuing enabled, > command queue depth 16. > [ 438.902027] scsi target0:0:0: Beginning Domain Validation > [ 438.910250] scsi target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 > ns, offset 31) > [ 438.913914] scsi target0:0:0: Domain Validation skipping write tests > [ 438.913927] scsi target0:0:0: Ending Domain Validation > [ 438.923619] scsi 0:0:1:0: Direct-Access HITACHI > DK32EJ14NSUN146G PQ0B PQ: 0 ANSI: 3 > [ 438.923640] scsi target0:0:1: tagged command queuing enabled, > command queue depth 16. > [ 438.923673] scsi target0:0:1: Beginning Domain Validation > [ 438.948952] scsi target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 > ns, offset 31) > [ 438.961993] scsi target0:0:1: Domain Validation skipping write tests > [ 438.962005] scsi target0:0:1: Ending Domain Validation > [ 442.871430] sd 0:0:0:0: [sda] 35378533 512-byte logical blocks: > (18.1 GB/16.8 GiB) > [ 442.875606] sd 0:0:0:0: [sda] Write Protect is off > [ 442.875623] sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08 > [ 442.877279] sd 0:0:1:0: [sdb] 286739329 512-byte logical blocks: > (146 GB/136 GiB) > [ 442.878836] sd 0:0:0:0: [sda] Write cache: disabled, read cache: > enabled, supports DPO and FUA > [ 442.883570] sda: > [ 442.893149] sd 0:0:1:0: [sdb] Write Protect is off > [ 442.893165] sd 0:0:1:0: [sdb] Mode Sense: fb 00 10 08 > [ 442.894816] sda1 sda2 sda3 sda7 > [ 442.900613] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: > enabled, supports DPO and FUA > [ 442.904536] sd 0:0:0:0: [sda] Attached SCSI disk > [ 442.923823] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 > [ 442.962062] sd 0:0:1:0: [sdb] Attached SCSI disk > ~ # > > > -- > To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > Archive: http://lists.debian.org/4d53c2c3.6080...@oldelvet.org.uk -- Jurij Smakov ju...@wooyd.org Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org