Package: linux-2.6
Version: 2.6.37-1
Severity: normal
I recently switched from 2.6.37-trunk-686 to 2.6.37-1-686.
after the switch, i find that sometimes my atl2.ko-driven onboard NIC
persistently claims NO CARRIER after resuming from suspend-to-RAM,
even when plugged into a legitimate ethernet port. This is not
entirely reliable, but maybe 50% of the time.
if i remove and re-load atl2.ko, the interface can properly detect the
ethernet.
i'm happy to help debug this further if there is any information you
want me to gather on this hardware. Please let me know.
--dkg
-- Package-specific info:
** Version:
Linux version 2.6.37-1-686 (Debian 2.6.37-1) (b...@decadent.org.uk) (gcc
version 4.4.5 (Debian 4.4.5-10) ) #1 SMP Tue Feb 15 18:21:50 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.37-1-686 root=/dev/mapper/vg_pip0-root ro verbose
** Not tainted
** Kernel log:
[67880.156933] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[67880.156948] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[67880.156962] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[67880.156976] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[67880.157932] i915 0000:00:02.0: PCI INT A disabled
[67880.260087] HDA Intel 0000:00:1b.0: PCI INT A disabled
[67880.276036] PM: suspend of devices complete after 147.583 msecs
[67880.292274] PM: late suspend of devices complete after 16.227 msecs
[67880.292426] ACPI: Preparing to enter system sleep state S3
[67880.316648] PM: Saving platform NVS memory
[67880.357927] Disabling non-boot CPUs ...
[67880.357927] Back to C!
[67880.357927] PM: Restoring platform NVS memory
[67880.357927] Force enabled HPET at resume
[67880.357927] ACPI: Waking up from system sleep state S3
[67880.400865] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1
(was 0x100006, writing 0x100002)
[67880.400904] pci 0000:00:1c.0: restoring config space at offset 0x9 (was
0x1fff1, writing 0x3fc13fb1)
[67880.400913] pci 0000:00:1c.0: restoring config space at offset 0x8 (was
0xfff0, writing 0x3fa03f90)
[67880.400923] pci 0000:00:1c.0: restoring config space at offset 0x7 (was
0xf0, writing 0x1010)
[67880.400937] pci 0000:00:1c.0: restoring config space at offset 0x1 (was
0x100104, writing 0x100107)
[67880.400976] pci 0000:00:1c.1: restoring config space at offset 0x9 (was
0x1fff1, writing 0x3fe13fd1)
[67880.400987] pci 0000:00:1c.1: restoring config space at offset 0x7 (was
0xf0, writing 0x2020)
[67880.401001] pci 0000:00:1c.1: restoring config space at offset 0x1 (was
0x100106, writing 0x100107)
[67880.401042] pci 0000:00:1c.2: restoring config space at offset 0x7 (was
0xf0, writing 0x3030)
[67880.401056] pci 0000:00:1c.2: restoring config space at offset 0x1 (was
0x100106, writing 0x100107)
[67880.401099] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[67880.401132] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[67880.401165] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[67880.401197] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[67880.401239] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was
0x2900006, writing 0x2900002)
[67880.401265] pci 0000:00:1e.0: restoring config space at offset 0xf (was
0x60000, writing 0x600ff)
[67880.401538] PM: early resume of devices complete after 0.795 msecs
[67880.406036] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[67880.406048] HDA Intel 0000:00:1b.0: setting latency timer to 64
[67880.406093] HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[67880.406136] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[67880.406143] pci 0000:00:1c.0: setting latency timer to 64
[67880.406156] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[67880.406163] pci 0000:00:1c.1: setting latency timer to 64
[67880.406176] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[67880.406183] pci 0000:00:1c.2: setting latency timer to 64
[67880.406198] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[67880.406208] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[67880.406234] usb usb2: root hub lost power or was reset
[67880.406253] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[67880.406262] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[67880.406287] usb usb3: root hub lost power or was reset
[67880.406303] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[67880.406313] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[67880.406337] usb usb4: root hub lost power or was reset
[67880.406354] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[67880.406363] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[67880.406387] usb usb5: root hub lost power or was reset
[67880.406405] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[67880.406415] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[67880.406486] pci 0000:00:1e.0: setting latency timer to 64
[67880.406505] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[67880.406513] ata_piix 0000:00:1f.2: setting latency timer to 64
[67880.406543] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[67880.406551] atl2 0000:03:00.0: setting latency timer to 64
[67880.411177] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[67880.411186] i915 0000:00:02.0: setting latency timer to 64
[67880.413110] sd 0:0:0:0: [sda] Starting disk
[67880.652031] usb 1-5: reset high speed USB device using ehci_hcd and address 2
[67880.896031] usb 1-8: reset high speed USB device using ehci_hcd and address 3
[67882.532200] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered
out
[67882.532209] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered
out
[67882.548191] ata1.00: configured for UDMA/133
[67882.548697] PM: resume of devices complete after 2147.034 msecs
[67882.549278] PM: Finishing wakeup.
[67882.549283] Restarting tasks ... done.
[67882.549761] video LNXVIDEO:00: Restoring backlight state
[67882.980083] usb 3-2: new low speed USB device using uhci_hcd and address 5
[67883.150414] atl2 0000:03:00.0: irq 41 for MSI/MSI-X
[67883.151364] ADDRCONF(NETDEV_UP): eth0: link is not ready
[67883.159163] usb 3-2: New USB device found, idVendor=0973, idProduct=0001
[67883.159174] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[67883.159181] usb 3-2: Product: SchlumbergerSema Cryptoflex e-gate
[67883.159187] usb 3-2: Manufacturer: SchlumbergerSema
[67977.344181] atl2 0000:03:00.0: PCI INT A disabled
[67977.379792] Atheros(R) L2 Ethernet Driver - version 2.2.3
[67977.379802] Copyright (c) 2007 Atheros Corporation.
[67977.379870] atl2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[67977.379892] atl2 0000:03:00.0: setting latency timer to 64
[67993.948723] atl2 0000:03:00.0: irq 41 for MSI/MSI-X
[67993.949268] ADDRCONF(NETDEV_UP): eth0: link is not ready
[67994.154327] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[67994.154739] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[69400.288116] usb 3-2: USB disconnect, address 5
[69400.528100] usb 3-2: new low speed USB device using uhci_hcd and address 6
[69400.707790] usb 3-2: New USB device found, idVendor=0973, idProduct=0001
[69400.707800] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[69400.707808] usb 3-2: Product: SchlumbergerSema Cryptoflex e-gate
[69400.707813] usb 3-2: Manufacturer: SchlumbergerSema
[69401.820130] usb 3-2: USB disconnect, address 6
[69402.060080] usb 3-2: new low speed USB device using uhci_hcd and address 7
[69402.239800] usb 3-2: New USB device found, idVendor=0973, idProduct=0001
[69402.239810] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[69402.239817] usb 3-2: Product: SchlumbergerSema Cryptoflex e-gate
[69402.239823] usb 3-2: Manufacturer: SchlumbergerSema
** Model information
not available
** Loaded modules:
Module Size Used by
atl2 17881 0
uinput 5126 1
sco 5975 2
rfcomm 23598 0
bnep 7711 2
l2cap 26630 6 bnep,rfcomm
crc16 1035 1 l2cap
bluetooth 37717 6 sco,bnep,rfcomm,l2cap
binfmt_misc 4969 1
fuse 47355 1
ath5k 112421 0
ath 10162 1 ath5k
mac80211 148377 1 ath5k
cfg80211 96193 3 ath5k,ath,mac80211
loop 10995 0
snd_hda_codec_realtek 201681 1
joydev 7016 0
snd_hda_intel 16357 0
snd_hda_codec 52089 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4046 1 snd_hda_codec
snd_pcm_oss 27678 0
snd_mixer_oss 10395 1 snd_pcm_oss
snd_pcm 47060 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
i915 252739 2
snd_seq_midi 3642 0
snd_rawmidi 12645 1 snd_seq_midi
drm_kms_helper 19621 1 i915
uvcvideo 45804 0
snd_seq_midi_event 3762 1 snd_seq_midi
snd_seq 34684 2 snd_seq_midi,snd_seq_midi_event
drm 119134 3 i915,drm_kms_helper
snd_timer 12501 2 snd_pcm,snd_seq
snd_seq_device 3659 3 snd_seq_midi,snd_rawmidi,snd_seq
eeepc_laptop 10334 0
psmouse 38578 0
videodev 45998 1 uvcvideo
i2c_algo_bit 3373 1 i915
sparse_keymap 1932 1 eeepc_laptop
v4l1_compat 10382 2 uvcvideo,videodev
tpm_tis 5405 0
i2c_core 12986 5 i915,drm_kms_helper,drm,videodev,i2c_algo_bit
snd 34245 11
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
tpm 8175 1 tpm_tis
rfkill 10786 4 bluetooth,cfg80211,eeepc_laptop
tpm_bios 3657 1 tpm
video 9711 1 i915
rng_core 2298 0
evdev 6160 18
serio_raw 2898 0
shpchp 18083 0
ac 1692 0
battery 4286 0
processor 20840 1
output 1220 1 video
soundcore 3434 1 snd
power_supply 5587 2 ac,battery
pci_hotplug 16971 2 eeepc_laptop,shpchp
snd_page_alloc 5029 2 snd_hda_intel,snd_pcm
button 3610 1 i915
ext3 92244 7
jbd 31940 1 ext3
mbcache 3784 1 ext3
sha256_generic 9077 2
aes_i586 6828 2
aes_generic 25766 1 aes_i586
cbc 1975 1
dm_crypt 8875 1
dm_mod 47842 32 dm_crypt
raid1 16157 1
md_mod 72647 2 raid1
usb_storage 30355 0
uas 5461 0
sd_mod 24958 3
crc_t10dif 1020 1 sd_mod
ata_generic 2183 0
ahci 16581 0
libahci 13230 1 ahci
ata_piix 17535 2
libata 123394 4 ata_generic,ahci,libahci,ata_piix
uhci_hcd 15822 0
ehci_hcd 28227 0
scsi_mod 128267 4 usb_storage,uas,sd_mod,libata
usbcore 95285 7 uvcvideo,usb_storage,uas,uhci_hcd,ehci_hcd
thermal 6106 0
thermal_sys 9328 3 video,processor,thermal
nls_base 4521 1 usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00
[VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics Controller [8086:2792] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8337]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 3f900000-3fafffff
Prefetchable memory behind bridge: 000000003fb00000-000000003fcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 000000003fd00000-000000003fefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge [8086:2641] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller [8086:266a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0400 [size=32]
03:00.0 Ethernet controller [0200]: Atheros Communications L2 Fast Ethernet
[1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fbfa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl2
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0951:1606 Kingston Technology
Bus 001 Device 003: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam /
CNF7129
Bus 003 Device 007: ID 0973:0001 Schlumberger e-gate Smart Card
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (200, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.37-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.37-1-686 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.37-1 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.37-1-686 recommends:
ii firmware-linux-free 2.6.37-1 Binary firmware for various driver
ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.37-1-686 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.37 <none> (no description available)
Versions of packages linux-image-2.6.37-1-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.37-1-686/prerm/removing-running-kernel-2.6.37-1-686: true
linux-image-2.6.37-1-686/postinst/missing-firmware-2.6.37-1-686:
linux-image-2.6.37-1-686/postinst/ignoring-do-bootloader-2.6.37-1-686:
linux-image-2.6.37-1-686/postinst/depmod-error-initrd-2.6.37-1-686: false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
