On Fri, Apr 15, 2011 at 07:50:03PM +0000, Bjarni Ingi Gislason wrote: > On Tue, Apr 12, 2011 at 07:25:21PM +0000, Bjarni Ingi Gislason wrote: > > Package: xserver-xorg-video-trident > > Version: 1:1.3.4-2 > > Severity: important > > > > *** Please type your report below this line *** > > > > If "iceweasel" or "iceape" are used, there is an error message > > and exit. > > > > (EE) TRIDENT(0): Unable to map IO aperture. Invalid argument (22) > > Fatal server error: > > AddScreen/ScreenInit failed for driver 0 > > ... > > Error: cannot open display: :0 > >
Some data related to the PCI bus. This causes error 22 (EINVAL), that trident reports: libpciaccess: common_interface.c: Already mapped is "devp->num_mappings[0]" with devp->num_mappings = 2, base = 0xfe7f0000, and size = 0x10000 PCI config for kernel (Debian linux-source-2.6.32-33, own compilation): CONFIG_PCI_QUIRKS=y # Bus options (PCI etc.) CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set # CONFIG_PCI_GOOLPC is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set CONFIG_PCI_IOV=y # CONFIG_HOTPLUG_PCI is not set # PCI IDE chipsets support CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_PCIBUS_ORDER is not set CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_NET_PCI=y # CONFIG_NE2K_PCI is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIAL_8250_PCI=y From kern.log. Video is 0000:00:02.0 Allocating PCI resources starting at a000000 (gap: a000000:f6000000) PCI: PCI BIOS revision 2.10 entry at 0xeb150, last bus=2 PCI: Using configuration type 1 for base access PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Scanning bus 0000:00 pci 0000:00:00.0: found [8086:7100] class 000600 header type 00 pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x16a pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x28 pci 0000:00:01.0: found [8086:7110] class 000601 header type 00 pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x16a pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x28 pci 0000:00:01.1: found [8086:7111] class 000101 header type 00 pci 0000:00:01.1: reg 20 io port: [0x1100-0x110f] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x16a pci 0000:00:01.1: calling pci_fixup_transparent_bridge+0x0/0x28 pci 0000:00:01.2: found [8086:7112] class 000c03 header type 00 pci 0000:00:01.2: reg 20 io port: [0x00-0x1f] pci 0000:00:01.2: calling quirk_resource_alignment+0x0/0x16a pci 0000:00:01.2: calling pci_fixup_transparent_bridge+0x0/0x28 pci 0000:00:01.3: found [8086:7113] class 000680 header type 00 pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x130 pci 0000:00:01.3: quirk: region 1000-103f claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: region 1400-140f claimed by PIIX4 SMB pci 0000:00:01.3: PIIX4 devres C PIO at 0398-0399 pci 0000:00:01.3: calling quirk_resource_alignment+0x0/0x16a pci 0000:00:01.3: calling pci_fixup_transparent_bridge+0x0/0x28 pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0xb pci 0000:00:02.0: found [1023:9660] class 000300 header type 00 pci 0000:00:02.0: reg 10 32bit mmio: [0xfdc00000-0xfdffffff] pci 0000:00:02.0: reg 14 32bit mmio: [0xfe7f0000-0xfe7fffff] pci 0000:00:02.0: reg 18 32bit mmio: [0xfe000000-0xfe3fffff] pci 0000:00:02.0: reg 30 32bit mmio pref: [0x0c0000-0x0cffff] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x16a pci 0000:00:03.0: found [104c:ac1c] class 000607 header type 02 pci 0000:00:03.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x16a pci 0000:00:03.0: supports D1 D2 pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:03.0: PME# disabled pci 0000:00:03.1: found [104c:ac1c] class 000607 header type 02 pci 0000:00:03.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:00:03.1: calling quirk_resource_alignment+0x0/0x16a pci 0000:00:03.1: supports D1 D2 pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot pci 0000:00:03.1: PME# disabled PCI: Fixups for bus 0000:00 pci 0000:00:03.0: scanning behind bridge, config 000000, pass 0 pci 0000:00:03.0: bus configuration invalid, reconfiguring pci 0000:00:03.1: scanning behind bridge, config 000000, pass 0 pci 0000:00:03.1: bus configuration invalid, reconfiguring pci 0000:00:03.0: scanning behind bridge, config 000000, pass 1 pci 0000:00:03.1: scanning behind bridge, config 000000, pass 1 PCI: Bus scan for 0000:00 returning with max=08 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7110] pci 0000:00:02.0: BAR 6: address space collision on of device [0x0c0000-0x0cffff] pci 0000:00:02.0: BAR 6: got res [0x1c000000-0x1c00ffff] bus [0x1c000000-0x1c00ffff] flags 0x27200 pci 0000:00:03.0: BAR 0: got res [0x1c010000-0x1c010fff] bus [0x1c010000-0x1c010fff] flags 0x20200 pci 0000:00:03.0: BAR 0: moved to bus [0x1c010000-0x1c010fff] flags 0x20200 pci 0000:00:03.1: BAR 0: got res [0x1c011000-0x1c011fff] bus [0x1c011000-0x1c011fff] flags 0x20200 pci 0000:00:03.1: BAR 0: moved to bus [0x1c011000-0x1c011fff] flags 0x20200 pci 0000:00:01.2: BAR 4: got res [0x1040-0x105f] bus [0x1040-0x105f] flags 0x20101 pci 0000:00:01.2: BAR 4: moved to bus [0x1040-0x105f] flags 0x20101 pci 0000:00:03.0: CardBus bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: 0x001800-0x0018ff pci 0000:00:03.0: IO window: 0x001c00-0x001cff pci 0000:00:03.0: PREFETCH window: 0xc000000-0xfffffff pci 0000:00:03.0: MEM window: 0x10000000-0x13ffffff pci 0000:00:03.1: CardBus bridge, secondary bus 0000:05 pci 0000:00:03.1: IO window: 0x002000-0x0020ff pci 0000:00:03.1: IO window: 0x002400-0x0024ff pci 0000:00:03.1: PREFETCH window: 0x14000000-0x17ffffff pci 0000:00:03.1: MEM window: 0x18000000-0x1bffffff PCI: setting IRQ 10 as level-triggered pci 0000:00:03.0: found PCI INT A -> IRQ 10 pci 0000:00:03.1: found PCI INT B -> IRQ 10 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x1800-0x18ff] pci_bus 0000:01: resource 1 io: [0x1c00-0x1cff] pci_bus 0000:01: resource 2 pref mem [0xc000000-0xfffffff] pci_bus 0000:01: resource 3 mem: [0x10000000-0x13ffffff] pci_bus 0000:05: resource 0 io: [0x2000-0x20ff] pci_bus 0000:05: resource 1 io: [0x2400-0x24ff] pci_bus 0000:05: resource 2 pref mem [0x14000000-0x17ffffff] pci_bus 0000:05: resource 3 mem: [0x18000000-0x1bffffff] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x166 pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x40 pci 0000:00:00.0: calling quirk_triton+0x0/0x2d pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x4d7 pci 0000:00:00.0: calling pci_fixup_video+0x0/0x91 pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x166 pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x40 pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x4d7 pci 0000:00:01.0: calling pci_fixup_video+0x0/0x91 pci 0000:00:01.1: calling quirk_e100_interrupt+0x0/0x166 pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x40 pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x4d7 pci 0000:00:01.1: calling pci_fixup_video+0x0/0x91 pci 0000:00:01.2: calling quirk_e100_interrupt+0x0/0x166 pci 0000:00:01.2: calling quirk_cardbus_legacy+0x0/0x40 pci 0000:00:01.2: calling quirk_usb_early_handoff+0x0/0x4d7 pci 0000:00:01.2: calling pci_fixup_video+0x0/0x91 pci 0000:00:01.3: calling quirk_e100_interrupt+0x0/0x166 pci 0000:00:01.3: calling quirk_cardbus_legacy+0x0/0x40 pci 0000:00:01.3: calling quirk_usb_early_handoff+0x0/0x4d7 pci 0000:00:01.3: calling pci_fixup_video+0x0/0x91 pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x40 pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x4d7 pci 0000:00:02.0: calling pci_fixup_video+0x0/0x91 pci 0000:00:02.0: Boot video device pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x40 pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x4d7 pci 0000:00:03.0: calling pci_fixup_video+0x0/0x91 pci 0000:00:03.1: calling quirk_cardbus_legacy+0x0/0x40 pci 0000:00:03.1: calling quirk_usb_early_handoff+0x0/0x4d7 pci 0000:00:03.1: calling pci_fixup_video+0x0/0x91 yenta_cardbus 0000:00:03.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:00:03.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:00:03.0: ISA IRQ mask 0x0ab8, PCI irq 10 yenta_cardbus 0000:00:03.1: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:00:03.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:00:03.1: ISA IRQ mask 0x0ab8, PCI irq 10 PCI: setting IRQ 9 as level-triggered uhci_hcd 0000:00:01.2: assigned PCI INT D -> IRQ 9 /proc/iomem: 00000000-0009efff : System RAM 0009f000-0009ffff : RAM buffer 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-09ffffff : System RAM 01000000-011e0843 : Kernel code 011e0844-012a26d7 : Kernel data 012d6000-012f612b : Kernel bss 0a000000-0bffffff : RAM buffer 0c000000-0fffffff : PCI CardBus 0000:01 10000000-13ffffff : PCI CardBus 0000:01 14000000-17ffffff : PCI CardBus 0000:05 18000000-1bffffff : PCI CardBus 0000:05 1c000000-1c00ffff : 0000:00:02.0 1c010000-1c010fff : 0000:00:03.0 1c010000-1c010fff : yenta_socket 1c011000-1c011fff : 0000:00:03.1 1c011000-1c011fff : yenta_socket fdc00000-fdffffff : 0000:00:02.0 fe000000-fe3fffff : 0000:00:02.0 fe7f0000-fe7fffff : 0000:00:02.0 ffff0000-ffffffff : pnp 00:00 -- Bjarni I. Gíslason -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
