Package: linux-2.6 Version: 2.6.38-5 Severity: minor File: /lib/modules/2.6.38-2-686/kernel/sound/pci/hda/snd-hda-intel.ko Tags: upstream
Got the following lines in my syslog. Can't say I have heard any clicks, and I don't know how to repro, but the text says I should report it so I am: May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: snd_pcm_avail() returned a value that is exceptionally large: 356416 bytes (2020 ms). May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: snd_pcm_dump(): May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: Soft volume PCM May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: Control: PCM Playback Volume May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: min_dB: -51 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: max_dB: 0 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: resolution: 256 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: Its setup is: May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: stream : PLAYBACK May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: access : MMAP_INTERLEAVED May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: format : S16_LE May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: subformat : STD May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: channels : 2 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: rate : 44100 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: exact rate : 44100 (44100/1) May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: msbits : 16 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: buffer_size : 16384 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: period_size : 8192 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: period_time : 185759 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: tstamp_mode : ENABLE May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: period_step : 1 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: avail_min : 15802 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: period_event : 0 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: start_threshold : -1 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: stop_threshold : 1073741824 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: silence_threshold: 0 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: silence_size : 0 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: boundary : 1073741824 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: Its setup is: May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: stream : PLAYBACK May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: access : MMAP_INTERLEAVED May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: format : S16_LE May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: subformat : STD May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: channels : 2 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: rate : 44100 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: exact rate : 44100 (44100/1) May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: msbits : 16 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: buffer_size : 16384 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: period_size : 8192 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: period_time : 185759 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: tstamp_mode : ENABLE May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: period_step : 1 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: avail_min : 15802 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: period_event : 0 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: start_threshold : -1 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: stop_threshold : 1073741824 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: silence_threshold: 0 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: silence_size : 0 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: boundary : 1073741824 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: appl_ptr : 16384 May 22 09:45:15 johansdator pulseaudio[2452]: alsa-util.c: hw_ptr : 89104 -- Package-specific info: ** Version: Linux version 2.6.38-2-686 (Debian 2.6.38-5) (b...@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 14:49:45 UTC 2011 ** Command line: root=/dev/sda2 ro ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [172187.372026] usb 5-1: new full speed USB device using uhci_hcd and address 20 [172187.496022] usb 5-1: device descriptor read/64, error -71 [172187.724022] usb 5-1: device descriptor read/64, error -71 [172187.940025] usb 5-1: new full speed USB device using uhci_hcd and address 21 [172188.356020] usb 5-1: device not accepting address 21, error -71 [172188.468022] usb 5-1: new full speed USB device using uhci_hcd and address 22 [172188.884019] usb 5-1: device not accepting address 22, error -71 [172188.884035] hub 5-0:1.0: unable to enumerate USB device on port 1 [172190.528023] usb 5-1: new full speed USB device using uhci_hcd and address 23 [172190.975986] usb 5-1: New USB device found, idVendor=1f6f, idProduct=0013 [172190.975993] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [172190.975997] usb 5-1: Product: Jawbone [172190.976000] usb 5-1: Manufacturer: Aliph [172190.976020] usb 5-1: SerialNumber: Jawbone_01_5D19C6 [172190.981066] usbhid 5-1:1.0: couldn't find an input interrupt endpoint [172194.268021] usb 1-3: new high speed USB device using ehci_hcd and address 26 [172194.413164] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c99 [172194.413171] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [172194.413175] usb 1-3: Product: Android Phone [172194.413178] usb 1-3: Manufacturer: HTC [172194.413181] usb 1-3: SerialNumber: HT97KL904443 [172194.417849] scsi19 : usb-storage 1-3:1.0 [172195.420686] scsi 19:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [172195.422809] sd 19:0:0:0: Attached scsi generic sg3 type 0 [172195.437420] sd 19:0:0:0: [sdc] Attached SCSI removable disk [217934.989251] usb 1-3: USB disconnect, address 26 [219546.384133] usb 5-1: USB disconnect, address 23 [243298.168047] usb 1-3: new high speed USB device using ehci_hcd and address 27 [243298.313118] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c99 [243298.313124] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [243298.313129] usb 1-3: Product: Android Phone [243298.313132] usb 1-3: Manufacturer: HTC [243298.313135] usb 1-3: SerialNumber: HT97KL904443 [243298.317896] scsi20 : usb-storage 1-3:1.0 [243299.319142] scsi 20:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [243299.321722] sd 20:0:0:0: Attached scsi generic sg3 type 0 [243299.334495] sd 20:0:0:0: [sdc] Attached SCSI removable disk [243303.816026] usb 5-1: new full speed USB device using uhci_hcd and address 24 [243303.936029] usb 5-1: device descriptor read/64, error -71 [243304.160023] usb 5-1: device descriptor read/64, error -71 [243304.376029] usb 5-1: new full speed USB device using uhci_hcd and address 25 [243304.496033] usb 5-1: device descriptor read/64, error -71 [243304.720025] usb 5-1: device descriptor read/64, error -71 [243304.936030] usb 5-1: new full speed USB device using uhci_hcd and address 26 [243305.344035] usb 5-1: device not accepting address 26, error -71 [243305.456030] usb 5-1: new full speed USB device using uhci_hcd and address 27 [243305.864037] usb 5-1: device not accepting address 27, error -71 [243305.864059] hub 5-0:1.0: unable to enumerate USB device on port 1 [243307.752033] usb 5-1: new full speed USB device using uhci_hcd and address 28 [243308.284298] usb 5-1: New USB device found, idVendor=1f6f, idProduct=0013 [243308.284305] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [243308.284309] usb 5-1: Product: Jawbone [243308.284312] usb 5-1: Manufacturer: Aliph [243308.284316] usb 5-1: SerialNumber: Jawbone_01_5D19C6 [243308.289378] usbhid 5-1:1.0: couldn't find an input interrupt endpoint [306659.276582] usb 1-3: USB disconnect, address 27 [306732.024074] usb 5-1: USB disconnect, address 28 [313427.960027] usb 1-3: new high speed USB device using ehci_hcd and address 30 [313428.105174] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c99 [313428.105180] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [313428.105185] usb 1-3: Product: Android Phone [313428.105188] usb 1-3: Manufacturer: HTC [313428.105191] usb 1-3: SerialNumber: HT97KL904443 [313428.111426] scsi21 : usb-storage 1-3:1.0 [313429.115820] scsi 21:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [313429.118142] sd 21:0:0:0: Attached scsi generic sg3 type 0 [313429.133570] sd 21:0:0:0: [sdc] Attached SCSI removable disk [317064.215236] usb 1-3: USB disconnect, address 30 [327368.228023] usb 1-3: new high speed USB device using ehci_hcd and address 31 [327368.373108] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c99 [327368.373115] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [327368.373119] usb 1-3: Product: Android Phone [327368.373122] usb 1-3: Manufacturer: HTC [327368.373125] usb 1-3: SerialNumber: HT97KL904443 [327368.379099] scsi22 : usb-storage 1-3:1.0 [327369.379499] scsi 22:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [327369.381226] sd 22:0:0:0: Attached scsi generic sg3 type 0 [327369.395491] sd 22:0:0:0: [sdc] Attached SCSI removable disk [327513.175800] usb 1-3: USB disconnect, address 31 [327635.312027] usb 1-3: new high speed USB device using ehci_hcd and address 32 [327635.457159] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c99 [327635.457166] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [327635.457170] usb 1-3: Product: Android Phone [327635.457173] usb 1-3: Manufacturer: HTC [327635.457176] usb 1-3: SerialNumber: HT97KL904443 [327635.462057] scsi23 : usb-storage 1-3:1.0 [327636.463299] scsi 23:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [327636.464337] sd 23:0:0:0: Attached scsi generic sg3 type 0 [327636.477046] sd 23:0:0:0: [sdc] Attached SCSI removable disk [329401.473668] usb 1-3: USB disconnect, address 32 [330526.304041] usb 1-3: new high speed USB device using ehci_hcd and address 33 [330526.449137] usb 1-3: New USB device found, idVendor=0bb4, idProduct=0c99 [330526.449144] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [330526.449148] usb 1-3: Product: Android Phone [330526.449151] usb 1-3: Manufacturer: HTC [330526.449155] usb 1-3: SerialNumber: HT97KL904443 [330526.453912] scsi24 : usb-storage 1-3:1.0 [330527.459465] scsi 24:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [330527.462432] sd 24:0:0:0: Attached scsi generic sg3 type 0 [330527.481277] sd 24:0:0:0: [sdc] Attached SCSI removable disk ** Model information not available ** Loaded modules: Module Size Used by acpi_cpufreq 12737 0 mperf 12387 1 acpi_cpufreq cpufreq_conservative 13598 0 cpufreq_userspace 12520 0 cpufreq_stats 12670 0 cpufreq_powersave 12422 2 rfcomm 31960 0 sco 13219 2 bnep 17147 2 l2cap 35435 6 rfcomm,bnep crc16 12327 1 l2cap bluetooth 50119 6 sco,rfcomm,bnep,l2cap vboxnetadp 13120 0 binfmt_misc 12778 1 vboxnetflt 23683 0 vboxdrv 147237 2 vboxnetadp,vboxnetflt fuse 55640 3 smsc47b397 12591 0 nvidia 9591091 28 snd_hda_codec_realtek 207838 1 snd_hda_intel 21529 1 snd_hda_codec 57563 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 12906 1 snd_hda_codec snd_pcm_oss 35864 0 snd_mixer_oss 17649 1 snd_pcm_oss snd_pcm 52774 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 12744 0 snd_rawmidi 22407 1 snd_seq_midi snd_seq_midi_event 13124 1 snd_seq_midi snd_seq 39172 2 snd_seq_midi,snd_seq_midi_event joydev 16906 0 hid_a4tech 12468 0 snd_timer 22171 2 snd_pcm,snd_seq snd_seq_device 12995 3 snd_seq_midi,snd_rawmidi,snd_seq snd 38153 13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12878 1 snd snd_page_alloc 12841 2 snd_hda_intel,snd_pcm parport_pc 21895 0 hp_wmi 12926 0 rng_core 12550 0 i2c_core 18989 1 nvidia evdev 13084 13 parport 27018 1 parport_pc sparse_keymap 12680 1 hp_wmi tpm_tis 12949 0 rfkill 18510 3 bluetooth,hp_wmi psmouse 45863 0 wmi 13018 1 hp_wmi processor 26983 1 acpi_cpufreq tpm 17476 1 tpm_tis serio_raw 12758 0 pcspkr 12515 0 tpm_bios 12799 1 tpm button 12866 0 thermal_sys 17667 1 processor ext3 98001 1 jbd 40818 1 ext3 mbcache 12810 1 ext3 hid_logitech 12878 0 ff_memless 12620 1 hid_logitech usbhid 35168 1 hid_logitech hid 59736 3 hid_a4tech,hid_logitech,usbhid usb_storage 34951 0 uas 12975 0 sg 21385 0 sr_mod 17418 0 sd_mod 34941 3 cdrom 34631 1 sr_mod crc_t10dif 12332 1 sd_mod ata_generic 12439 0 ahci 20897 3 libahci 22161 1 ahci ata_piix 21079 0 uhci_hcd 21850 0 libata 131904 4 ata_generic,ahci,libahci,ata_piix ehci_hcd 34889 0 scsi_mod 134369 6 usb_storage,uas,sg,sr_mod,sd_mod,libata e100 31317 0 usbcore 99058 7 usbhid,usb_storage,uas,uhci_hcd,ehci_hcd tg3 103807 0 mii 12562 1 e100 libphy 18279 1 tg3 nls_base 12649 1 usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82955X Memory Controller Hub [8086:2774] Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82955X PCI Express Root Port [8086:2775] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e1000000-e31fffff Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at e0a00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 80000000-801fffff Prefetchable memory behind bridge: 0000000080200000-00000000803fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=28, subordinate=28, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: 80400000-805fffff Prefetchable memory behind bridge: 0000000080600000-00000000807fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: e0500000-e07fffff Prefetchable memory behind bridge: 0000000080800000-00000000809fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 2000 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 2020 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 21 Region 4: I/O ports at 2040 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 22 Region 4: I/O ports at 2060 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at e0a04000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: e0200000-e04fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 20a0 [size=16] Kernel driver in use: ata_piix 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 01) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 44 Region 0: I/O ports at 20d0 [size=8] Region 1: I/O ports at 20e8 [size=4] Region 2: I/O ports at 20d8 [size=8] Region 3: I/O ports at 20ec [size=4] Region 4: I/O ports at 20b0 [size=16] Region 5: Memory at e0a04400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [Quadro NVS 285] [10de:0165] (rev a1) (prog-if 00 [VGA controller]) Subsystem: nVidia Corporation Device [10de:029d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at e0000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia 05:09.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 0d) Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter [8086:1050] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e0420000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 1000 [size=64] Region 2: Memory at e0400000 (32-bit, non-prefetchable) [size=128K] Capabilities: <access denied> Kernel driver in use: e100 3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:3013] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 002 Device 002: ID 046d:c30e Logitech, Inc. UltraX Keyboard (Y-BL49) Bus 003 Device 002: ID 046d:c215 Logitech, Inc. Extreme 3D Pro Bus 004 Device 002: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35 / Trust 450L Optical Mouse Bus 001 Device 033: ID 0bb4:0c99 High Tech Computer Corp. Desire (debug) -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.38-2-686 (SMP w/2 CPU cores) Locale: LANG=sv_SE.utf8, LC_CTYPE=sv_SE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.38-2-686 depends on: ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 3.2 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.38-2-686 recommends: ii firmware-linux-free 3 Binary firmware for various driver ii libc6-i686 2.13-4 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.38-2-686 suggests: pn grub-pc | extlinux | lilo <none> (no description available) pn linux-doc-2.6.38 <none> (no description available) Versions of packages linux-image-2.6.38-2-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.29 Binary firmware for various driver ii firmware-linux-nonfree 0.29 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.38-2-686/postinst/depmod-error-initrd-2.6.38-2-686: false linux-image-2.6.38-2-686/postinst/ignoring-do-bootloader-2.6.38-2-686: linux-image-2.6.38-2-686/postinst/missing-firmware-2.6.38-2-686: linux-image-2.6.38-2-686/prerm/removing-running-kernel-2.6.38-2-686: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org