Package: linux-2.6
Version: 3.0.0~rc3-1~experimental.1
Severity: important

Hi,

today, while running 'aptitude install' on a package, the machine
crashed hard, requiring me to press the reset button:


Jun 27 10:32:12 spruce kernel: [ 6982.765536] ------------[ cut here 
]------------
Jun 27 10:32:12 spruce kernel: [ 6982.765602] kernel BUG at 
/build/buildd-linux-2.6_3.0.0~rc3-1~experimental.1-i386-z_zgCg/linux-2.6-3.0.0~rc3/debian/build/source_i386_none/fs/inode.c:1368!
Jun 27 10:32:12 spruce kernel: [ 6982.765777] invalid opcode: 0000 [#1] SMP 
Jun 27 10:32:12 spruce kernel: [ 6982.765837] Modules linked in: snd_hrtimer 
binfmt_misc drbd lru_cache cn ip6table_filter ip6_tables ebtable_nat ebtables 
bnep rfcomm bluetooth rfkill crc16 battery powernow_k8 mperf cpufreq_userspace 
cpufreq_conservative speedstep_lib cpufreq_powersave cpufreq_stats nfsd nfs 
lockd fscache auth_rpcgss nfs_acl sunrpc nf_nat_ftp nf_nat_irc nf_conntrack_ftp 
nf_conntrack_irc ipt_MASQUERADE iptable_nat nf_nat ipt_LOG xt_limit xt_tcpudp 
xt_state nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables 
x_tables ppp_deflate bsd_comp ppp_async crc_ccitt ppp_generic slhc bridge stp 
deflate zlib_deflate ctr twofish_generic twofish_i586 twofish_common camellia 
serpent blowfish cast5 des_generic xcbc rmd160 sha512_generic sha1_generic hmac 
crypto_null af_key fuse loop kvm snd_hda_codec_hdmi snd_hda_codec_realtek 
snd_seq_midi snd_rawmidi snd_hda_intel snd_hda_codec snd_hwdep 
snd_seq_midi_event snd_pcm_oss snd_mixer_oss snd_seq snd_pcm snd_seq_
 device snd_timer radeon snd soundcore
Jun 27 10:32:12 spruce kernel: ttm drm_kms_helper drm wmi sp5100_tco button 
snd_page_alloc i2c_algo_bit processor power_supply i2c_piix4 pcspkr thermal_sys 
asus_atk0110 tpm_tis evdev tpm tpm_bios k10temp shpchp pci_hotplug i2c_core 
ext3 jbd mbcache sha256_generic cryptd aes_i586 aes_generic cbc dm_crypt dm_mod 
raid1 md_mod usbhid hid sg sd_mod sr_mod crc_t10dif cdrom ata_generic ohci_hcd 
pata_atiixp ahci libahci ehci_hcd libata usbcore scsi_mod e1000e r8169 mii 
[last unloaded: scsi_wait_scan]
Jun 27 10:32:12 spruce kernel: [ 6982.767938] 
Jun 27 10:32:12 spruce kernel: [ 6982.767959] Pid: 9428, comm: rm Not tainted 
3.0.0-rc3-686-pae #1 System manufacturer System Product Name/M4A88T-V EVO
Jun 27 10:32:12 spruce kernel: [ 6982.768007] EIP: 0060:[<c10dd30d>] EFLAGS: 
00010202 CPU: 1
Jun 27 10:32:12 spruce kernel: [ 6982.768007] EIP is at iput+0x13/0x113
Jun 27 10:32:12 spruce kernel: [ 6982.768007] EAX: eaa132d0 EBX: eaa132d0 ECX: 
c13fa8c0 EDX: f6d82be0
Jun 27 10:32:12 spruce kernel: [ 6982.768007] ESI: e9769914 EDI: eaa132d0 EBP: 
00000001 ESP: c015ff48
Jun 27 10:32:12 spruce kernel: [ 6982.768007]  DS: 007b ES: 007b FS: 00d8 GS: 
00e0 SS: 0068
Jun 27 10:32:12 spruce kernel: [ 6982.768007] Process rm (pid: 9428, 
ti=c015e000 task=c020e530 task.ti=c015e000)
Jun 27 10:32:12 spruce kernel: [ 6982.768007] Stack:
Jun 27 10:32:12 spruce kernel: [ 6982.768007]  de901994 e9769914 eaa132d0 
c10db424 de901994 de9019e0 eaa132d0 eaa132d0
Jun 27 10:32:12 spruce kernel: [ 6982.768007]  c10db9e8 e8b41080 40000010 
c10ce29f e8b41088 de901994 f191fd80 e8b41080
Jun 27 10:32:12 spruce kernel: [ 6982.768007]  00000000 f170bec0 c015e000 
c10cb8e7 f170bec0 00000005 090688d0 c10cb945
Jun 27 10:32:12 spruce kernel: [ 6982.768007] Call Trace:
Jun 27 10:32:12 spruce kernel: [ 6982.768007]  [<c10db424>] ? 
dentry_kill+0xd1/0xe6
Jun 27 10:32:12 spruce kernel: [ 6982.768007]  [<c10db9e8>] ? dput+0xaf/0xb7
Jun 27 10:32:12 spruce kernel: [ 6982.768007]  [<c10ce29f>] ? fput+0x185/0x19d
Jun 27 10:32:12 spruce kernel: [ 6982.768007]  [<c10cb8e7>] ? 
filp_close+0x54/0x5a
Jun 27 10:32:12 spruce kernel: [ 6982.768007]  [<c10cb945>] ? 
sys_close+0x58/0x85
Jun 27 10:32:12 spruce kernel: [ 6982.768007]  [<c12b9e5f>] ? 
sysenter_do_call+0x12/0x28
Jun 27 10:32:12 spruce kernel: [ 6982.768007] Code: 3f c1 e8 ae 79 1d 00 b8 7c 
e2 3f c1 e8 c1 30 f7 ff 5e 5f 5b 5e 5f 5d c3 57 85 c0 56 53 89 c3 0f 84 02 01 
00 00 f6 40 1c 40 74 04 <0f> 0b eb fe 8d 50 14 8d 40 68 e8 18 7c 07 00 85 c0 0f 
84 e5 00 
Jun 27 10:32:12 spruce kernel: [ 6982.768007] EIP: [<c10dd30d>] iput+0x13/0x113 
SS:ESP 0068:c015ff48
Jun 27 10:32:12 spruce kernel: [ 6982.808070] ---[ end trace 5d90f1080d07b8fe 
]---
Jun 27 10:32:33 spruce kernel: [ 7004.128099] 'IN-unknown:'IN=br0 OUT= 
MAC=01:00:5e:00:00:01:bc:ae:c5:ae:d2:21:08:00 SRC=0.0.0.0 DST=224.0.0.1 LEN=32 
TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
Jun 27 10:32:37 spruce kernel: [ 7008.300087] ------------[ cut here 
]------------
Jun 27 10:32:37 spruce kernel: [ 7008.300108] WARNING: at 
/build/buildd-linux-2.6_3.0.0~rc3-1~experimental.1-i386-z_zgCg/linux-2.6-3.0.0~rc3/debian/build/source_i386_none/fs/fs-writeback.c:356
 writeback_single_inode+0x5b/0x17b()
Jun 27 10:32:37 spruce kernel: [ 7008.300118] Hardware name: System Product Name
Jun 27 10:32:37 spruce kernel: [ 7008.300122] Modules linked in: snd_hrtimer 
binfmt_misc drbd lru_cache cn ip6table_filter ip6_tables ebtable_nat ebtables 
bnep rfcomm bluetooth rfkill crc16 battery powernow_k8 mperf cpufreq_userspace 
cpufreq_conservative speedstep_lib cpufreq_powersave cpufreq_stats nfsd nfs 
lockd fscache auth_rpcgss nfs_acl sunrpc nf_nat_ftp nf_nat_irc nf_conntrack_ftp 
nf_conntrack_irc ipt_MASQUERADE iptable_nat nf_nat ipt_LOG xt_limit xt_tcpudp 
xt_state nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables 
x_tables ppp_deflate bsd_comp ppp_async crc_ccitt ppp_generic slhc bridge stp 
deflate zlib_deflate ctr twofish_generic twofish_i586 twofish_common camellia 
serpent blowfish cast5 des_generic xcbc rmd160 sha512_generic sha1_generic hmac 
crypto_null af_key fuse loop kvm snd_hda_codec_hdmi snd_hda_codec_realtek 
snd_seq_midi snd_rawmidi snd_hda_intel snd_hda_codec snd_hwdep 
snd_seq_midi_event snd_pcm_oss snd_mixer_oss snd_seq snd_pcm snd_seq_
 device snd_timer radeon snd soundcore
Jun 27 10:32:37 spruce kernel: ttm drm_kms_helper drm wmi sp5100_tco button 
snd_page_alloc i2c_algo_bit processor power_supply i2c_piix4 pcspkr thermal_sys 
asus_atk0110 tpm_tis evdev tpm tpm_bios k10temp shpchp pci_hotplug i2c_core 
ext3 jbd mbcache sha256_generic cryptd aes_i586 aes_generic cbc dm_crypt dm_mod 
raid1 md_mod usbhid hid sg sd_mod sr_mod crc_t10dif cdrom ata_generic ohci_hcd 
pata_atiixp ahci libahci ehci_hcd libata usbcore scsi_mod e1000e r8169 mii 
[last unloaded: scsi_wait_scan]
Jun 27 10:32:37 spruce kernel: [ 7008.300340] Pid: 1045, comm: flush-253:4 
Tainted: G      D      3.0.0-rc3-686-pae #1
Jun 27 10:32:37 spruce kernel: [ 7008.300346] Call Trace:
Jun 27 10:32:37 spruce kernel: [ 7008.300359]  [<c1036b51>] ? 
warn_slowpath_common+0x6a/0x7b
Jun 27 10:32:37 spruce kernel: [ 7008.300369]  [<c10e4b84>] ? 
writeback_single_inode+0x5b/0x17b
Jun 27 10:32:37 spruce kernel: [ 7008.300378]  [<c1036b6f>] ? 
warn_slowpath_null+0xd/0x10
Jun 27 10:32:37 spruce kernel: [ 7008.300387]  [<c10e4b84>] ? 
writeback_single_inode+0x5b/0x17b
Jun 27 10:32:37 spruce kernel: [ 7008.300396]  [<c10e4e59>] ? 
writeback_sb_inodes+0x9e/0xfb
Jun 27 10:32:37 spruce kernel: [ 7008.300405]  [<c10e5166>] ? 
writeback_inodes_wb+0xc8/0xd8
Jun 27 10:32:37 spruce kernel: [ 7008.300414]  [<c10e571e>] ? 
wb_writeback+0x1be/0x28e
Jun 27 10:32:37 spruce kernel: [ 7008.300423]  [<c10e591d>] ? 
wb_do_writeback+0x12f/0x19c
Jun 27 10:32:37 spruce kernel: [ 7008.300433]  [<c10e5a27>] ? 
bdi_writeback_thread+0x9d/0x1aa
Jun 27 10:32:37 spruce kernel: [ 7008.300442]  [<c10e598a>] ? 
wb_do_writeback+0x19c/0x19c
Jun 27 10:32:37 spruce kernel: [ 7008.300449]  [<c104c97c>] ? kthread+0x63/0x68
Jun 27 10:32:37 spruce kernel: [ 7008.300457]  [<c104c919>] ? 
kthread_worker_fn+0x114/0x114
Jun 27 10:32:37 spruce kernel: [ 7008.300467]  [<c12ba3fe>] ? 
kernel_thread_helper+0x6/0x10
Jun 27 10:32:37 spruce kernel: [ 7008.300473] ---[ end trace 5d90f1080d07b8ff 
]---
Jun 27 10:32:37 spruce kernel: [ 7008.300480] ------------[ cut here 
]------------
Jun 27 10:32:37 spruce kernel: [ 7008.300490] WARNING: at 
/build/buildd-linux-2.6_3.0.0~rc3-1~experimental.1-i386-z_zgCg/linux-2.6-3.0.0~rc3/debian/build/source_i386_none/fs/fs-writeback.c:356
 writeback_single_inode+0x5b/0x17b()
Jun 27 10:32:37 spruce kernel: [ 7008.300498] Hardware name: System Product Name
Jun 27 10:32:37 spruce kernel: [ 7008.300502] Modules linked in: snd_hrtimer 
binfmt_misc drbd lru_cache cn ip6table_filter ip6_tables ebtable_nat ebtables 
bnep rfcomm bluetooth rfkill crc16 battery powernow_k8 mperf cpufreq_userspace 
cpufreq_conservative speedstep_lib cpufreq_powersave cpufreq_stats nfsd nfs 
lockd fscache auth_rpcgss nfs_acl sunrpc nf_nat_ftp nf_nat_irc nf_conntrack_ftp 
nf_conntrack_irc ipt_MASQUERADE iptable_nat nf_nat ipt_LOG xt_limit xt_tcpudp 
xt_state nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables 
x_tables ppp_deflate bsd_comp ppp_async crc_ccitt ppp_generic slhc bridge stp 
deflate zlib_deflate ctr twofish_generic twofish_i586 twofish_common camellia 
serpent blowfish cast5 des_generic xcbc rmd160 sha512_generic sha1_generic hmac 
crypto_null af_key fuse loop kvm snd_hda_codec_hdmi snd_hda_codec_realtek 
snd_seq_midi snd_rawmidi snd_hda_intel snd_hda_codec snd_hwdep 
snd_seq_midi_event snd_pcm_oss snd_mixer_oss snd_seq snd_pcm snd_seq_
 device snd_timer radeon snd soundcore
Jun 27 10:32:37 spruce kernel: ttm drm_kms_helper drm wmi sp5100_tco button 
snd_page_alloc i2c_algo_bit processor power_supply i2c_piix4 pcspkr thermal_sys 
asus_atk0110 tpm_tis evdev tpm tpm_bios k10temp shpchp pci_hotplug i2c_core 
ext3 jbd mbcache sha256_generic cryptd aes_i586 aes_generic cbc dm_crypt dm_mod 
raid1 md_mod usbhid hid sg sd_mod sr_mod crc_t10dif cdrom ata_generic ohci_hcd 
pata_atiixp ahci libahci ehci_hcd libata usbcore scsi_mod e1000e r8169 mii 
[last unloaded: scsi_wait_scan]
Jun 27 10:32:37 spruce kernel: [ 7008.300689] Pid: 1045, comm: flush-253:4 
Tainted: G      D W    3.0.0-rc3-686-pae #1
Jun 27 10:32:37 spruce kernel: [ 7008.300694] Call Trace:
Jun 27 10:32:37 spruce kernel: [ 7008.300701]  [<c1036b51>] ? 
warn_slowpath_common+0x6a/0x7b
Jun 27 10:32:37 spruce kernel: [ 7008.300710]  [<c10e4b84>] ? 
writeback_single_inode+0x5b/0x17b
Jun 27 10:32:37 spruce kernel: [ 7008.300718]  [<c1036b6f>] ? 
warn_slowpath_null+0xd/0x10
Jun 27 10:32:37 spruce kernel: [ 7008.300727]  [<c10e4b84>] ? 
writeback_single_inode+0x5b/0x17b
Jun 27 10:32:37 spruce kernel: [ 7008.300735]  [<c10e4e59>] ? 
writeback_sb_inodes+0x9e/0xfb
Jun 27 10:32:37 spruce kernel: [ 7008.300744]  [<c10e5166>] ? 
writeback_inodes_wb+0xc8/0xd8
Jun 27 10:32:37 spruce kernel: [ 7008.300753]  [<c10e571e>] ? 
wb_writeback+0x1be/0x28e
Jun 27 10:32:37 spruce kernel: [ 7008.300762]  [<c10e591d>] ? 
wb_do_writeback+0x12f/0x19c
Jun 27 10:32:37 spruce kernel: [ 7008.300771]  [<c10e5a27>] ? 
bdi_writeback_thread+0x9d/0x1aa
Jun 27 10:32:37 spruce kernel: [ 7008.300780]  [<c10e598a>] ? 
wb_do_writeback+0x19c/0x19c
Jun 27 10:32:37 spruce kernel: [ 7008.300787]  [<c104c97c>] ? kthread+0x63/0x68
Jun 27 10:32:37 spruce kernel: [ 7008.300794]  [<c104c919>] ? 
kthread_worker_fn+0x114/0x114
Jun 27 10:32:37 spruce kernel: [ 7008.300802]  [<c12ba3fe>] ? 
kernel_thread_helper+0x6/0x10
Jun 27 10:32:37 spruce kernel: [ 7008.300807] ---[ end trace 5d90f1080d07b900 
]---



-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
not available

** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge 
[1022:9601]
        Subsystem: ASUSTeK Computer Inc. Device [1043:843e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:01.0 PCI bridge [0604]: ASUSTeK Computer Inc. RS880 PCI to PCI bridge (int 
gfx) [1043:9602] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fe900000-feafffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge 
(PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge 
(PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: feb00000-febfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA 
Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: I/O ports at b000 [size=8]
        Region 1: I/O ports at a000 [size=4]
        Region 2: I/O ports at 9000 [size=8]
        Region 3: I/O ports at 8000 [size=4]
        Region 4: I/O ports at 7000 [size=16]
        Region 5: Memory at fe8ffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 
Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller 
[1002:4398] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI 
Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at fe8ff800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 
Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller 
[1002:4398] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fe8f7000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI 
Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 19
        Region 0: Memory at fe8ff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] 
(rev 3c)
        Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:8389]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller 
[1002:439c] (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ff00 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: pata_atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) 
[1002:4383]
        Subsystem: ASUSTeK Computer Inc. Device [1043:841b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin ? routed to IRQ 16
        Region 0: Memory at fe8f0000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller 
[1002:439d]
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge 
[1002:4384] (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 
Controller [1002:4399] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at fe8f6000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor 
HyperTransport Configuration [1022:1200]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor 
Address Map [1022:1201]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor 
DRAM Controller [1022:1202]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor 
Miscellaneous Control [1022:1203]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>
        Kernel driver in use: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor 
Link Control [1022:1204]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS880 [Radeon HD 
4250] [1002:9715] (prog-if 00 [VGA controller])
        Subsystem: ASUSTeK Computer Inc. Device [1043:843e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Region 1: I/O ports at c000 [size=256]
        Region 2: Memory at feae0000 (32-bit, non-prefetchable) [size=64K]
        Region 5: Memory at fe900000 (32-bit, non-prefetchable) [size=1M]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: radeon

01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD 
4200] [1002:970f]
        Subsystem: ASUSTeK Computer Inc. Device [1043:843e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 19
        Region 0: Memory at feaf4000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
        Subsystem: ASUSTeK Computer Inc. Device [1043:8432]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 42
        Region 0: I/O ports at d800 [size=256]
        Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: r8169

03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network 
Connection [8086:10d3]
        Subsystem: Intel Corporation Gigabit CT Desktop Adapter [8086:a01f]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at feb00000 (32-bit, non-prefetchable) [size=512K]
        Region 2: I/O ports at ec00 [size=32]
        Region 3: Memory at febdc000 (32-bit, non-prefetchable) [size=16K]
        Expansion ROM at feb80000 [disabled] [size=256K]
        Capabilities: <access denied>
        Kernel driver in use: e1000e


** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c03f Logitech, Inc. UltraX Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Freaking out in file system space scares me.


Kind regards,
--Toni++



-- System Information:
Debian Release: 6.0.2
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 
'proposed-updates'), (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-bpo.2-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-3.0.0-rc3-686-pae depends on:
ii  debconf [debconf-2.0]         1.5.36.1   Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-3.0.0-rc3-686-pae recommends:
ii  firmware-linux-free           2.6.32-35  Binary firmware for various driver
ii  libc6-i686                    2.11.2-10  Embedded GNU C Library: Shared lib

Versions of packages linux-image-3.0.0-rc3-686-pae suggests:
ii  grub-pc                 1.98+20100804-14 GRand Unified Bootloader, version 
pn  linux-doc-3.0.0         <none>           (no description available)

Versions of packages linux-image-3.0.0-rc3-686-pae is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
ii  firmware-linux                0.28       Binary firmware for various driver
ii  firmware-linux-nonfree        0.28       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
ii  xen-hypervisor-4.0-amd64 [xen 4.0.1-2    The Xen Hypervisor on AMD64

-- debconf information:
* linux-image-3.0.0-rc3-686-pae/postinst/missing-firmware-3.0.0-rc3-686-pae:
  
linux-image-3.0.0-rc3-686-pae/prerm/removing-running-kernel-3.0.0-rc3-686-pae: 
true
  linux-image-3.0.0-rc3-686-pae/postinst/depmod-error-initrd-3.0.0-rc3-686-pae: 
false
  linux-image-3.0.0-rc3-686-pae/postinst/ignoring-ramdisk:




-- System Information:
Debian Release: 6.0.2
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 
'proposed-updates'), (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-bpo.2-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-3.0.0-rc3-686-pae depends on:
ii  debconf [debconf-2.0]         1.5.36.1   Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-3.0.0-rc3-686-pae recommends:
ii  firmware-linux-free           2.6.32-35  Binary firmware for various driver
ii  libc6-i686                    2.11.2-10  Embedded GNU C Library: Shared lib

Versions of packages linux-image-3.0.0-rc3-686-pae suggests:
ii  grub-pc                 1.98+20100804-14 GRand Unified Bootloader, version 
pn  linux-doc-3.0.0         <none>           (no description available)

Versions of packages linux-image-3.0.0-rc3-686-pae is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
ii  firmware-linux                0.28       Binary firmware for various driver
ii  firmware-linux-nonfree        0.28       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
ii  xen-hypervisor-4.0-amd64 [xen 4.0.1-2    The Xen Hypervisor on AMD64

-- debconf information:
* linux-image-3.0.0-rc3-686-pae/postinst/missing-firmware-3.0.0-rc3-686-pae:
  
linux-image-3.0.0-rc3-686-pae/prerm/removing-running-kernel-3.0.0-rc3-686-pae: 
true
  linux-image-3.0.0-rc3-686-pae/postinst/depmod-error-initrd-3.0.0-rc3-686-pae: 
false
  linux-image-3.0.0-rc3-686-pae/postinst/ignoring-ramdisk:



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to