Package: linux-2.6
Version: 2.6.32-35
Severity: important

I am trying to get an Intel quad-port-NIC to work, but the igb-driver does not 
recognize the card if I load it manually.

Running the kernel from backports (linux-image-2.6.38-bpo.2-amd64) does fix 
this problem, but breaks support for drbd (drbd8-utils is 8.3.7-2.1, but the 
drbd-module is v8.3.9) - so this is not an option.

-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (da...@debian.org) (gcc version 
4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/md1p1 ro quiet

** Tainted: W (512)
 * Taint on warning.

** Model information
sys_vendor: Supermicro
product_name: X8SIL
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 1.1
board_vendor: Supermicro
board_name: X8SIL
board_version: 0123456789

** Loaded modules:
Module                  Size  Used by
igb                    77959  0 
dca                     3761  1 igb
[...]

** PCI devices:
03:00.0 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network 
Connection [8086:1526] (rev 01)
        Subsystem: Intel Corporation Gigabit ET2 Quad Port Server Adapter 
[8086:a06c]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at f9fe0000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=4M]
        Region 2: I/O ports at bc00 [size=32]
        Region 3: Memory at f9fdc000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
                Address: 0000000000000000  Data: 0000
                Masking: 00000000  Pending: 00000000
        Capabilities: [70] MSI-X: Enable- Count=10 Masked-
                Vector table: BAR=3 offset=00000000
                PBA: BAR=3 offset=00002000
        Capabilities: [a0] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency 
L0 <4us, L1 <64us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [140 v1] Device Serial Number 00-1b-21-ff-ff-b2-a0-18
        Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
                ARICap: MFVC- ACS-, Next Function: 1
                ARICtl: MFVC- ACS-, Function Group: 0
        Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
                IOVCap: Migration-, Interrupt Message Number: 000
                IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
                IOVSta: Migration-
                Initial VFs: 8, Total VFs: 8, Number of VFs: 8, Function 
Dependency Link: 00
                VF offset: 128, stride: 2, Device ID: 10ca
                Supported Page Size: 00000553, System Page Size: 00000001
                Region 0: Memory at 0000000080000000 (64-bit, prefetchable)
                Region 3: Memory at 0000000080020000 (64-bit, prefetchable)
                VF Migration: offset: 00000000, BIR: 0

03:00.1 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network 
Connection [8086:1526] (rev 01)
[...]

04:00.0 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network 
Connection [8086:1526] (rev 01)
[...]

04:00.1 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network 
Connection [8086:1526] (rev 01)
[...]

-- System Information:
Debian Release: 6.0.2
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]        1.5.36.1    Debian configuration management sy
ii  initramfs-tools [linux-initr 0.98.8      tools for generating an initramfs
ii  linux-base                   3.2~bpo60+1 Linux image base package
ii  module-init-tools            3.12-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-35  Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii  grub                          0.97-64    GRand Unified Bootloader (dummy pa
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
ii  firmware-linux                0.28       Binary firmware for various driver
ii  firmware-linux-nonfree        0.28       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information excluded



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to