Package: linux-2.6 Version: 2.6.39-2 Severity: normal File: /lib/modules/2.6.39-2-686-pae/kernel/drivers/net/wireless/rt2x00/rt61pci.ko
In 2.6.39-686-pae kernel, the ralink wifi pci card isn't working, while in a 2.6.38 it is. $ lspci | grept ralink 32:0b:00.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g $ lsmod | grept rt 23:rt61pci 22168 0 24:rt2x00pci 12683 1 rt61pci 25:rt2x00lib 28634 2 rt61pci,rt2x00pci 26:mac80211 164606 2 rt2x00pci,rt2x00lib 27:cfg80211 107076 2 rt2x00lib,mac80211 28:eeprom_93cx6 12423 1 rt61pci 92:crc_itu_t 12331 2 rt61pci,firewire_core $ modinfo rt61pci filename: /lib/modules/2.6.39-2-686-pae/kernel/drivers/net/wireless/rt2x00/rt61pci.ko license: GPL firmware: rt2661.bin firmware: rt2561s.bin firmware: rt2561.bin description: Ralink RT61 PCI & PCMCIA Wireless LAN driver. version: 2.3.0 author: http://rt2x00.serialmonkey.com srcversion: 12A0A8B7A10EAE6E53E404A alias: pci:v00001814d00000401sv*sd*bc*sc*i* alias: pci:v00001814d00000302sv*sd*bc*sc*i* alias: pci:v00001814d00000301sv*sd*bc*sc*i* depends: rt2x00lib,rt2x00pci,eeprom_93cx6,crc-itu-t intree: Y vermagic: 2.6.39-2-686-pae SMP mod_unload modversions 686 parm: nohwcrypt:Disable hardware encryption. (bool) -- Package-specific info: ** Version: Linux version 2.6.39-2-686-pae (Debian 2.6.39-2) (b...@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:33:14 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-686-pae root=UUID=8fe7010b-ba34-4eb0-9a7a-d5343f670dba ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 7.813374] yenta_cardbus 0000:06:05.0: Socket status: 30000006 [ 7.813384] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff] [ 7.813388] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x24ff 0x2800-0x28bf [ 7.820049] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf5ffffff] [ 7.820054] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf5ffffff: excluding 0xf0000000-0xf41fffff [ 7.820072] yenta_cardbus 0000:06:05.0: pcmcia: parent PCI bridge window: [mem 0xd4000000-0xd7ffffff pref] [ 7.820077] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd4000000-0xd7ffffff: excluding 0xd4000000-0xd7ffffff [ 7.823408] yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0098] [ 7.823433] yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts to PCI [ 7.823436] yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI [ 7.823444] yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x66 [ 7.859985] [drm] Initialized drm 1.1.0 20060810 [ 8.000602] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x204000/0x0 [ 8.053076] yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20 [ 8.053082] yenta_cardbus 0000:0a:09.0: Socket status: 30000820 [ 8.053087] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e [ 8.053098] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff] [ 8.053104] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff [ 8.060036] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff] [ 8.060041] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd020ffff [ 8.060061] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff pref] [ 8.060065] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd8000000-0xdbffffff: excluding 0xd8000000-0xdbffffff [ 8.060185] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10 [ 8.205631] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.205638] i915 0000:00:02.0: setting latency timer to 64 [ 8.206941] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.206945] [drm] Driver supports precise vblank timestamp query. [ 8.383538] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding nothing: probe failed. [ 8.383612] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding nothing: probe failed. [ 8.383657] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding nothing: probe failed. [ 8.383696] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding nothing: probe failed. [ 8.383740] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff [ 8.383776] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 8.383811] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 8.383846] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: excluding nothing: probe failed. [ 8.500119] usb 1-8: usbfs: USBDEVFS_CONTROL failed cmd mtp-probe rqt 128 rq 6 len 1024 ret -110 [ 8.513018] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.513449] [drm] initialized overlay support [ 8.654695] Linux media interface: v0.10 [ 8.693520] Linux video capture interface: v2.00 [ 8.782630] gspca: v2.12.0 registered [ 8.786598] gspca: probing 046d:0892 [ 8.786602] vc032x: Sensor POxxxx [ 8.788942] gspca: video0 created [ 8.788964] usbcore: registered new interface driver vc032x [ 8.952061] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1 [ 8.952095] pci 0000:0b:00.0: [1814:0302] type 0 class 0x000280 [ 8.952135] pci 0000:0b:00.0: reg 10: [mem 0xffff8000-0xffffffff] [ 8.952300] pci 0000:0b:00.0: BAR 0: assigned [mem 0xdc000000-0xdc007fff] [ 8.952313] pci 0000:0b:00.0: BAR 0: set to [mem 0xdc000000-0xdc007fff] (PCI address [0xdc000000-0xdc007fff]) [ 8.952475] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 [ 8.954589] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 [ 8.955429] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 8.956154] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 8.956913] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff [ 8.956958] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 8.957000] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 8.957042] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 9.075273] cfg80211: Calling CRDA to update world regulatory domain [ 9.301847] fbcon: inteldrmfb (fb0) is primary device [ 9.562009] rt61pci 0000:0b:00.0: enabling device (0000 -> 0002) [ 9.562022] rt61pci 0000:0b:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 9.562038] rt61pci 0000:0b:00.0: setting latency timer to 64 [ 9.571154] Console: switching to colour frame buffer device 160x50 [ 9.577487] fb0: inteldrmfb frame buffer device [ 9.577489] drm: registered panic notifier [ 9.577667] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 9.577725] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.577793] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 9.577830] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.627901] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.628678] Registered led device: rt61pci-phy0::radio [ 9.628712] Registered led device: rt61pci-phy0::assoc [ 9.656621] udevd[304]: renamed network interface wlan0 to wlan2 [ 9.661328] hda_codec: ALC883: BIOS auto-probing. [ 9.662291] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 11.096302] Adding 5855228k swap on /dev/sda2. Priority:-1 extents:1 across:5855228k [ 11.100734] EXT4-fs (sda3): re-mounted. Opts: (null) [ 11.542026] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 11.726121] loop: module loaded [ 12.859418] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 12.938550] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 13.833050] fuse init (API version 7.16) [ 14.999065] Disabling lock debugging due to kernel taint [ 15.048784] vboxdrv: Found 2 processor cores. [ 15.049058] vboxdrv: fAsync=0 offMin=0x302 offMax=0xa32 [ 15.049116] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 15.049119] vboxdrv: Successfully loaded version 4.0.8_Debian (interface 0x00180000). [ 15.618390] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 17.911125] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.322714] apm: BIOS not found. [ 34.157312] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0 [ 34.344242] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 34.624054] EXT4-fs (sda6): re-mounted. Opts: commit=0 [ 102.444823] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex [ 102.444831] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX [ 102.445210] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 112.808038] eth0: no IPv6 routers present [ 196.912052] CE: hpet increased min_delta_ns to 20113 nsec [ 437.783190] process `skype' is using obsolete setsockopt SO_BSDCOMPAT ** Model information not available ** Loaded modules: Module Size Used by acpi_cpufreq 12737 1 mperf 12387 1 acpi_cpufreq cpufreq_powersave 12422 0 cpufreq_stats 12670 0 cpufreq_conservative 12987 0 cpufreq_userspace 12520 0 vboxnetadp 13146 0 vboxnetflt 23683 0 vboxdrv 154090 2 vboxnetadp,vboxnetflt binfmt_misc 12778 1 uinput 12984 1 fuse 55666 1 loop 17777 0 firewire_sbp2 17514 0 snd_hda_codec_realtek 207702 1 arc4 12418 2 ecb 12649 2 rt61pci 22168 0 rt2x00pci 12683 1 rt61pci rt2x00lib 28634 2 rt61pci,rt2x00pci mac80211 164606 2 rt2x00pci,rt2x00lib cfg80211 107076 2 rt2x00lib,mac80211 eeprom_93cx6 12423 1 rt61pci gspca_vc032x 29935 0 gspca_main 22289 1 gspca_vc032x videodev 61226 1 gspca_main media 13692 1 videodev snd_hda_intel 21529 0 i915 286502 2 snd_hda_codec 57741 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 12906 1 snd_hda_codec snd_pcm 52731 2 snd_hda_intel,snd_hda_codec drm_kms_helper 26550 1 i915 pcmcia 32024 0 snd_seq 39172 0 snd_timer 22171 2 snd_pcm,snd_seq snd_seq_device 12995 1 snd_seq drm 129190 3 i915,drm_kms_helper joydev 16906 0 snd 38189 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device soundcore 12878 1 snd acer_wmi 17475 0 i2c_i801 12670 0 sparse_keymap 12680 1 acer_wmi rfkill 18510 2 cfg80211,acer_wmi yenta_socket 22152 0 tifm_7xx1 12762 0 i2c_algo_bit 12706 1 i915 pcmcia_rsrc 17314 1 yenta_socket rng_core 12550 0 pcmcia_core 17973 3 pcmcia,yenta_socket,pcmcia_rsrc i2c_core 19022 6 videodev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit evdev 13084 20 tifm_core 13098 1 tifm_7xx1 pcspkr 12515 0 psmouse 45863 0 serio_raw 12758 0 ac 12552 0 wmi 13018 1 acer_wmi snd_page_alloc 12841 2 snd_hda_intel,snd_pcm battery 12957 0 power_supply 13283 2 ac,battery button 12783 1 i915 video 17345 1 i915 container 12525 0 shpchp 26653 0 pci_hotplug 26303 1 shpchp processor 26983 3 acpi_cpufreq ext4 270998 3 mbcache 12810 1 ext4 jbd2 55701 1 ext4 crc16 12327 1 ext4 hid_microsoft 12497 0 usbhid 35206 0 hid 59841 2 hid_microsoft,usbhid sd_mod 35060 5 crc_t10dif 12332 1 sd_mod ata_generic 12439 0 ata_piix 21079 4 tg3 103807 0 uhci_hcd 21850 0 libata 132100 2 ata_generic,ata_piix ehci_hcd 34885 0 thermal 13058 0 scsi_mod 134453 3 firewire_sbp2,sd_mod,libata firewire_ohci 26332 0 usbcore 99225 6 gspca_vc032x,gspca_main,usbhid,uhci_hcd,ehci_hcd thermal_sys 17667 3 video,processor,thermal firewire_core 42365 2 firewire_sbp2,firewire_ohci libphy 18279 1 tg3 crc_itu_t 12331 2 rt61pci,firewire_core ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:16:36:31:99:8d brd ff:ff:ff:ff:ff:ff inet 192.168.11.106/24 brd 192.168.11.255 scope global eth0 inet6 fe80::216:36ff:fe31:998d/64 scope link valid_lft forever preferred_lft forever 3: wlan2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether f0:7d:68:5d:67:48 brd ff:ff:ff:ff:ff:ff 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 287275 207 0 0 0 0 0 0 287275 207 0 0 0 0 0 0 eth0: 1101892 1673 0 0 0 0 0 0 213505 1633 0 0 0 0 0 0 wlan2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 vboxnet0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 1875 total packets received 1 with invalid addresses 0 forwarded 0 incoming packets discarded 1874 incoming packets delivered 1818 requests sent out Icmp: 73 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 73 8 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 8 IcmpMsg: InType3: 73 OutType3: 8 Tcp: 38 active connections openings 3 passive connection openings 0 failed connection attempts 0 connection resets received 16 connections established 1442 segments received 1346 segments send out 2 segments retransmited 0 bad segments received. 0 resets sent Udp: 350 packets received 8 packets to unknown port received. 0 packet receive errors 460 packets sent UdpLite: TcpExt: 17 TCP sockets finished time wait in fast timer 99 delayed acks sent Quick ack mode was activated 2 times 740 packet headers predicted 137 acknowledgments not containing data payload received 226 predicted acknowledgments 2 congestion windows recovered without slow start after partial ack 2 other TCP timeouts 2 DSACKs sent for old packets 2 DSACKs received TCPDSACKIgnoredNoUndo: 2 IpExt: InMcastPkts: 9 OutMcastPkts: 17 InOctets: 1361589 OutOctets: 467152 InMcastOctets: 3198 OutMcastOctets: 4241 *** Device features: eth0: 0x149a3 lo: 0x201b7c65 vboxnet0: 0x4000 wlan2: 0x6000 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1800 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at d0400000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d0380000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at d0440000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: d0d00000-d0efffff Prefetchable memory behind bridge: 00000000d0f00000-00000000d10fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: d0000000-d01fffff Prefetchable memory behind bridge: 00000000d0b00000-00000000d0cfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d0700000-d08fffff Prefetchable memory behind bridge: 00000000d0900000-00000000d0afffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=07, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0000000-f5ffffff Prefetchable memory behind bridge: 00000000d4000000-00000000d7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at d0644000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=56 I/O behind bridge: 00003000-00003fff Memory behind bridge: d0200000-d02fffff Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master]) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 18b0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 18c0 [size=32] Kernel driver in use: i801_smbus 03:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express [14e4:169d] (rev 11) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 05:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A [8086:032c] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=05, secondary=06, subordinate=0a, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0000000-f5ffffff Prefetchable memory behind bridge: 00000000d4000000-00000000d7ffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 06:02.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 4: I/O ports at 2840 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 06:02.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 16 Region 4: I/O ports at 2860 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 06:02.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 17 Region 0: Memory at f4005800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 06:03.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 4: I/O ports at 2880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 06:03.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 28a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 06:03.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 16 Region 0: Memory at f4005900 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 06:04.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI]) Subsystem: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f4005000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 06:05.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 02) Subsystem: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f4004000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: d4000000-d7fff000 (prefetchable) Memory window 1: f0000000-f3fff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 06:06.0 Modem [0703]: Realtek Semiconductor Co., Ltd. SmartLAN56 56K Modem [10ec:8197] (prog-if 00 [Generic]) Subsystem: AMBIT Microsystem Corp. Device [1468:3006] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 2800 [size=64] Capabilities: <access denied> Kernel driver in use: serial 0a:09.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=4K] Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176 Memory window 0: d8000000-dbfff000 (prefetchable) Memory window 1: dc000000-dffff000 I/O window 0: 00003000-000030ff I/O window 1: 00003400-000034ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 0a:09.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at d0206000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 0a:09.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] Subsystem: Acer Incorporated [ALI] Device [1025:0098] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at d0205000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: tifm_7xx1 0b:00.0 Network controller [0280]: Ralink corp. RT2561/RT61 rev B 802.11g [1814:0302] Subsystem: D-Link System Inc AirPlus G DWL-G630 Wireless Cardbus Adapter (rev.E2) [1186:3c08] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: rt61pci ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 046d:0892 Logitech, Inc. OrbiCam Bus 009 Device 002: ID 045e:00db Microsoft Corp. Natural Ergonomic Keyboard 4000 V1.0 Bus 009 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical -- System Information: Debian Release: wheezy/sid APT prefers testing-proposed-updates APT policy: (500, 'testing-proposed-updates'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.39-2-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.39-2-686-pae depends on: ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs ii linux-base 3.2 Linux image base package ii module-init-tools 3.16-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.39-2-686-pae recommends: pn firmware-linux-free <none> (no description available) ii libc6-i686 2.13-7 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.39-2-686-pae suggests: ii grub-pc 1.99-6 GRand Unified Bootloader, version pn linux-doc-2.6.39 <none> (no description available) Versions of packages linux-image-2.6.39-2-686-pae is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) ii firmware-ralink 0.30 Binary firmware for Ralink wireles pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.39-2-686-pae/postinst/ignoring-ramdisk: * linux-image-2.6.39-2-686-pae/postinst/missing-firmware-2.6.39-2-686-pae: linux-image-2.6.39-2-686-pae/postinst/depmod-error-initrd-2.6.39-2-686-pae: false linux-image-2.6.39-2-686-pae/prerm/removing-running-kernel-2.6.39-2-686-pae: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org